arch/powerpc/boot/dts/mpc8378_rdb.dts

   1 /*
   2  * MPC8378E RDB Device Tree Source
   3  *
   4  * Copyright 2007, 2008 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 /dts-v1/;
  13
  14 / {
  15         compatible = "fsl,mpc8378rdb";
  16         #address-cells = <1>;
  17         #size-cells = <1>;
  18
  19         aliases {
  20                 ethernet0 = &enet0;
  21                 ethernet1 = &enet1;
  22                 serial0 = &serial0;
  23                 serial1 = &serial1;
  24                 pci0 = &pci0;
  25                 pci1 = &pci1;
  26                 pci2 = &pci2;
  27         };
  28
  29         cpus {
  30                 #address-cells = <1>;
  31                 #size-cells = <0>;
  32
  33                 PowerPC,8378@0 {
  34                         device_type = "cpu";
  35                         reg = <0x0>;
  36                         d-cache-line-size = <32>;
  37                         i-cache-line-size = <32>;
  38                         d-cache-size = <32768>;
  39                         i-cache-size = <32768>;
  40                         timebase-frequency = <0>;
  41                         bus-frequency = <0>;
  42                         clock-frequency = <0>;
  43                 };
  44         };
  45
  46         memory {
  47                 device_type = "memory";
  48                 reg = <0x00000000 0x10000000>;  // 256MB at 0
  49         };
  50
  51         localbus@e0005000 {
  52                 #address-cells = <2>;
  53                 #size-cells = <1>;
  54                 compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
  55                 reg = <0xe0005000 0x1000>;
  56                 interrupts = <77 0x8>;
  57                 interrupt-parent = <&ipic>;
  58
  59                 // CS0 and CS1 are swapped when
  60                 // booting from nand, but the
  61                 // addresses are the same.
  62                 ranges = <0x0 0x0 0xfe000000 0x00800000
  63                           0x1 0x0 0xe0600000 0x00008000
  64                           0x2 0x0 0xf0000000 0x00020000
  65                           0x3 0x0 0xfa000000 0x00008000>;
  66
  67                 flash@0,0 {
  68                         #address-cells = <1>;
  69                         #size-cells = <1>;
  70                         compatible = "cfi-flash";
  71                         reg = <0x0 0x0 0x800000>;
  72                         bank-width = <2>;
  73                         device-width = <1>;
  74                 };
  75
  76                 nand@1,0 {
  77                         #address-cells = <1>;
  78                         #size-cells = <1>;
  79                         compatible = "fsl,mpc8378-fcm-nand",
  80                                      "fsl,elbc-fcm-nand";
  81                         reg = <0x1 0x0 0x8000>;
  82
  83                         u-boot@0 {
  84                                 reg = <0x0 0x100000>;
  85                                 read-only;
  86                         };
  87
  88                         kernel@100000 {
  89                                 reg = <0x100000 0x300000>;
  90                         };
  91                         fs@400000 {
  92                                 reg = <0x400000 0x1c00000>;
  93                         };
  94                 };
  95         };
  96
  97         immr@e0000000 {
  98                 #address-cells = <1>;
  99                 #size-cells = <1>;
 100                 device_type = "soc";
 101                 compatible = "simple-bus";
 102                 ranges = <0x0 0xe0000000 0x00100000>;
 103                 reg = <0xe0000000 0x00000200>;
 104                 bus-frequency = <0>;
 105
 106                 wdt@200 {
 107                         device_type = "watchdog";
 108                         compatible = "mpc83xx_wdt";
 109                         reg = <0x200 0x100>;
 110                 };
 111
 112                 i2c@3000 {
 113                         #address-cells = <1>;
 114                         #size-cells = <0>;
 115                         cell-index = <0>;
 116                         compatible = "fsl-i2c";
 117                         reg = <0x3000 0x100>;
 118                         interrupts = <14 0x8>;
 119                         interrupt-parent = <&ipic>;
 120                         dfsrr;
 121                         rtc@68 {
 122                                 compatible = "dallas,ds1339";
 123                                 reg = <0x68>;
 124                         };
 125
 126                         mcu_pio: mcu@a {
 127                                 #gpio-cells = <2>;
 128                                 compatible = "fsl,mc9s08qg8-mpc8378erdb",
 129                                              "fsl,mcu-mpc8349emitx";
 130                                 reg = <0x0a>;
 131                                 gpio-controller;
 132                         };
 133                 };
 134
 135                 i2c@3100 {
 136                         #address-cells = <1>;
 137                         #size-cells = <0>;
 138                         cell-index = <1>;
 139                         compatible = "fsl-i2c";
 140                         reg = <0x3100 0x100>;
 141                         interrupts = <15 0x8>;
 142                         interrupt-parent = <&ipic>;
 143                         dfsrr;
 144                 };
 145
 146                 spi@7000 {
 147                         cell-index = <0>;
 148                         compatible = "fsl,spi";
 149                         reg = <0x7000 0x1000>;
 150                         interrupts = <16 0x8>;
 151                         interrupt-parent = <&ipic>;
 152                         mode = "cpu";
 153                 };
 154
 155                 dma@82a8 {
 156                         #address-cells = <1>;
 157                         #size-cells = <1>;
 158                         compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
 159                         reg = <0x82a8 4>;
 160                         ranges = <0 0x8100 0x1a8>;
 161                         interrupt-parent = <&ipic>;
 162                         interrupts = <71 8>;
 163                         cell-index = <0>;
 164                         dma-channel@0 {
 165                                 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
 166                                 reg = <0 0x80>;
 167                                 cell-index = <0>;
 168                                 interrupt-parent = <&ipic>;
 169                                 interrupts = <71 8>;
 170                         };
 171                         dma-channel@80 {
 172                                 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
 173                                 reg = <0x80 0x80>;
 174                                 cell-index = <1>;
 175                                 interrupt-parent = <&ipic>;
 176                                 interrupts = <71 8>;
 177                         };
 178                         dma-channel@100 {
 179                                 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
 180                                 reg = <0x100 0x80>;
 181                                 cell-index = <2>;
 182                                 interrupt-parent = <&ipic>;
 183                                 interrupts = <71 8>;
 184                         };
 185                         dma-channel@180 {
 186                                 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
 187                                 reg = <0x180 0x28>;
 188                                 cell-index = <3>;
 189                                 interrupt-parent = <&ipic>;
 190                                 interrupts = <71 8>;
 191                         };
 192                 };
 193
 194                 usb@23000 {
 195                         compatible = "fsl-usb2-dr";
 196                         reg = <0x23000 0x1000>;
 197                         #address-cells = <1>;
 198                         #size-cells = <0>;
 199                         interrupt-parent = <&ipic>;
 200                         interrupts = <38 0x8>;
 201                         phy_type = "ulpi";
 202                 };
 203
 204                 mdio@24520 {
 205                         #address-cells = <1>;
 206                         #size-cells = <0>;
 207                         compatible = "fsl,gianfar-mdio";
 208                         reg = <0x24520 0x20>;
 209                         phy2: ethernet-phy@2 {
 210                                 interrupt-parent = <&ipic>;
 211                                 interrupts = <17 0x8>;
 212                                 reg = <0x2>;
 213                                 device_type = "ethernet-phy";
 214                         };
 215                         tbi0: tbi-phy@11 {
 216                                 reg = <0x11>;
 217                                 device_type = "tbi-phy";
 218                         };
 219                 };
 220
 221                 mdio@25520 {
 222                         #address-cells = <1>;
 223                         #size-cells = <0>;
 224                         compatible = "fsl,gianfar-tbi";
 225                         reg = <0x25520 0x20>;
 226
 227                         tbi1: tbi-phy@11 {
 228                                 reg = <0x11>;
 229                                 device_type = "tbi-phy";
 230                         };
 231                 };
 232
 233
 234                 enet0: ethernet@24000 {
 235                         cell-index = <0>;
 236                         device_type = "network";
 237                         model = "eTSEC";
 238                         compatible = "gianfar";
 239                         reg = <0x24000 0x1000>;
 240                         local-mac-address = [ 00 00 00 00 00 00 ];
 241                         interrupts = <32 0x8 33 0x8 34 0x8>;
 242                         phy-connection-type = "mii";
 243                         interrupt-parent = <&ipic>;
 244                         phy-handle = <&phy2>;
 245                 };
 246
 247                 enet1: ethernet@25000 {
 248                         cell-index = <1>;
 249                         device_type = "network";
 250                         model = "eTSEC";
 251                         compatible = "gianfar";
 252                         reg = <0x25000 0x1000>;
 253                         local-mac-address = [ 00 00 00 00 00 00 ];
 254                         interrupts = <35 0x8 36 0x8 37 0x8>;
 255                         phy-connection-type = "mii";
 256                         interrupt-parent = <&ipic>;
 257                         fixed-link = <1 1 1000 0 0>;
 258                 };
 259
 260                 serial0: serial@4500 {
 261                         cell-index = <0>;
 262                         device_type = "serial";
 263                         compatible = "ns16550";
 264                         reg = <0x4500 0x100>;
 265                         clock-frequency = <0>;
 266                         interrupts = <9 0x8>;
 267                         interrupt-parent = <&ipic>;
 268                 };
 269
 270                 serial1: serial@4600 {
 271                         cell-index = <1>;
 272                         device_type = "serial";
 273                         compatible = "ns16550";
 274                         reg = <0x4600 0x100>;
 275                         clock-frequency = <0>;
 276                         interrupts = <10 0x8>;
 277                         interrupt-parent = <&ipic>;
 278                 };
 279
 280                 crypto@30000 {
 281                         compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
 282                                      "fsl,sec2.1", "fsl,sec2.0";
 283                         reg = <0x30000 0x10000>;
 284                         interrupts = <11 0x8>;
 285                         interrupt-parent = <&ipic>;
 286                         fsl,num-channels = <4>;
 287                         fsl,channel-fifo-len = <24>;
 288                         fsl,exec-units-mask = <0x9fe>;
 289                         fsl,descriptor-types-mask = <0x3ab0ebf>;
 290                 };
 291
 292                 /* IPIC
 293                  * interrupts cell = <intr #, sense>
 294                  * sense values match linux IORESOURCE_IRQ_* defines:
 295                  * sense == 8: Level, low assertion
 296                  * sense == 2: Edge, high-to-low change
 297                  */
 298                 ipic: interrupt-controller@700 {
 299                         compatible = "fsl,ipic";
 300                         interrupt-controller;
 301                         #address-cells = <0>;
 302                         #interrupt-cells = <2>;
 303                         reg = <0x700 0x100>;
 304                 };
 305         };
 306
 307         pci0: pci@e0008500 {
 308                 interrupt-map-mask = <0xf800 0 0 7>;
 309                 interrupt-map = <
 310                                 /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
 311
 312                                 /* IDSEL AD14 IRQ6 inta */
 313                                  0x7000 0x0 0x0 0x1 &ipic 22 0x8
 314
 315                                 /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
 316                                  0x7800 0x0 0x0 0x1 &ipic 21 0x8
 317                                  0x7800 0x0 0x0 0x2 &ipic 22 0x8
 318                                  0x7800 0x0 0x0 0x4 &ipic 23 0x8
 319
 320                                 /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
 321                                  0xE000 0x0 0x0 0x1 &ipic 23 0x8
 322                                  0xE000 0x0 0x0 0x2 &ipic 21 0x8
 323                                  0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
 324                 interrupt-parent = <&ipic>;
 325                 interrupts = <66 0x8>;
 326                 bus-range = <0 0>;
 327                 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 328                           0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
 329                           0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
 330                 clock-frequency = <66666666>;
 331                 #interrupt-cells = <1>;
 332                 #size-cells = <2>;
 333                 #address-cells = <3>;
 334                 reg = <0xe0008500 0x100         /* internal registers */
 335                        0xe0008300 0x8>;         /* config space access registers */
 336                 compatible = "fsl,mpc8349-pci";
 337                 device_type = "pci";
 338         };
 339
 340         pci1: pcie@e0009000 {
 341                 #address-cells = <3>;
 342                 #size-cells = <2>;
 343                 #interrupt-cells = <1>;
 344                 device_type = "pci";
 345                 compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
 346                 reg = <0xe0009000 0x00001000>;
 347                 ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
 348                           0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
 349                 bus-range = <0 255>;
 350                 interrupt-map-mask = <0xf800 0 0 7>;
 351                 interrupt-map = <0 0 0 1 &ipic 1 8
 352                                  0 0 0 2 &ipic 1 8
 353                                  0 0 0 3 &ipic 1 8
 354                                  0 0 0 4 &ipic 1 8>;
 355                 clock-frequency = <0>;
 356
 357                 pcie@0 {
 358                         #address-cells = <3>;
 359                         #size-cells = <2>;
 360                         device_type = "pci";
 361                         reg = <0 0 0 0 0>;
 362                         ranges = <0x02000000 0 0xa8000000
 363                                   0x02000000 0 0xa8000000
 364                                   0 0x10000000
 365                                   0x01000000 0 0x00000000
 366                                   0x01000000 0 0x00000000
 367                                   0 0x00800000>;
 368                 };
 369         };
 370
 371         pci2: pcie@e000a000 {
 372                 #address-cells = <3>;
 373                 #size-cells = <2>;
 374                 #interrupt-cells = <1>;
 375                 device_type = "pci";
 376                 compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
 377                 reg = <0xe000a000 0x00001000>;
 378                 ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
 379                           0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
 380                 bus-range = <0 255>;
 381                 interrupt-map-mask = <0xf800 0 0 7>;
 382                 interrupt-map = <0 0 0 1 &ipic 2 8
 383                                  0 0 0 2 &ipic 2 8
 384                                  0 0 0 3 &ipic 2 8
 385                                  0 0 0 4 &ipic 2 8>;
 386                 clock-frequency = <0>;
 387
 388                 pcie@0 {
 389                         #address-cells = <3>;
 390                         #size-cells = <2>;
 391                         device_type = "pci";
 392                         reg = <0 0 0 0 0>;
 393                         ranges = <0x02000000 0 0xc8000000
 394                                   0x02000000 0 0xc8000000
 395                                   0 0x10000000
 396                                   0x01000000 0 0x00000000
 397                                   0x01000000 0 0x00000000
 398                                   0 0x00800000>;
 399                 };
 400         };
 401 };