]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - arch/powerpc/boot/dts/mpc8349emitxgp.dts
[ARM] pxa: corgi backlight driver should not select ssp drivers
[linux-2.6-omap-h63xx.git] / arch / powerpc / boot / dts / mpc8349emitxgp.dts
1 /*
2  * MPC8349E-mITX-GP Device Tree Source
3  *
4  * Copyright 2007 Freescale Semiconductor Inc.
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms of the GNU General Public License as published by the
8  * Free Software Foundation; either version 2 of the License, or (at your
9  * option) any later version.
10  */
11
12 /dts-v1/;
13
14 / {
15         model = "MPC8349EMITXGP";
16         compatible = "MPC8349EMITXGP", "MPC834xMITX", "MPC83xxMITX";
17         #address-cells = <1>;
18         #size-cells = <1>;
19
20         aliases {
21                 ethernet0 = &enet0;
22                 serial0 = &serial0;
23                 serial1 = &serial1;
24                 pci0 = &pci0;
25         };
26
27         cpus {
28                 #address-cells = <1>;
29                 #size-cells = <0>;
30
31                 PowerPC,8349@0 {
32                         device_type = "cpu";
33                         reg = <0x0>;
34                         d-cache-line-size = <32>;
35                         i-cache-line-size = <32>;
36                         d-cache-size = <32768>;
37                         i-cache-size = <32768>;
38                         timebase-frequency = <0>;       // from bootloader
39                         bus-frequency = <0>;            // from bootloader
40                         clock-frequency = <0>;          // from bootloader
41                 };
42         };
43
44         memory {
45                 device_type = "memory";
46                 reg = <0x00000000 0x10000000>;
47         };
48
49         soc8349@e0000000 {
50                 #address-cells = <1>;
51                 #size-cells = <1>;
52                 device_type = "soc";
53                 compatible = "simple-bus";
54                 ranges = <0x0 0xe0000000 0x00100000>;
55                 reg = <0xe0000000 0x00000200>;
56                 bus-frequency = <0>;                    // from bootloader
57
58                 wdt@200 {
59                         device_type = "watchdog";
60                         compatible = "mpc83xx_wdt";
61                         reg = <0x200 0x100>;
62                 };
63
64                 i2c@3000 {
65                         #address-cells = <1>;
66                         #size-cells = <0>;
67                         cell-index = <0>;
68                         compatible = "fsl-i2c";
69                         reg = <0x3000 0x100>;
70                         interrupts = <14 0x8>;
71                         interrupt-parent = <&ipic>;
72                         dfsrr;
73                 };
74
75                 i2c@3100 {
76                         #address-cells = <1>;
77                         #size-cells = <0>;
78                         cell-index = <1>;
79                         compatible = "fsl-i2c";
80                         reg = <0x3100 0x100>;
81                         interrupts = <15 0x8>;
82                         interrupt-parent = <&ipic>;
83                         dfsrr;
84                 };
85
86                 spi@7000 {
87                         cell-index = <0>;
88                         compatible = "fsl,spi";
89                         reg = <0x7000 0x1000>;
90                         interrupts = <16 0x8>;
91                         interrupt-parent = <&ipic>;
92                         mode = "cpu";
93                 };
94
95                 dma@82a8 {
96                         #address-cells = <1>;
97                         #size-cells = <1>;
98                         compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
99                         reg = <0x82a8 4>;
100                         ranges = <0 0x8100 0x1a8>;
101                         interrupt-parent = <&ipic>;
102                         interrupts = <71 8>;
103                         cell-index = <0>;
104                         dma-channel@0 {
105                                 compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
106                                 reg = <0 0x80>;
107                                 cell-index = <0>;
108                                 interrupt-parent = <&ipic>;
109                                 interrupts = <71 8>;
110                         };
111                         dma-channel@80 {
112                                 compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
113                                 reg = <0x80 0x80>;
114                                 cell-index = <1>;
115                                 interrupt-parent = <&ipic>;
116                                 interrupts = <71 8>;
117                         };
118                         dma-channel@100 {
119                                 compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
120                                 reg = <0x100 0x80>;
121                                 cell-index = <2>;
122                                 interrupt-parent = <&ipic>;
123                                 interrupts = <71 8>;
124                         };
125                         dma-channel@180 {
126                                 compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
127                                 reg = <0x180 0x28>;
128                                 cell-index = <3>;
129                                 interrupt-parent = <&ipic>;
130                                 interrupts = <71 8>;
131                         };
132                 };
133
134                 usb@23000 {
135                         compatible = "fsl-usb2-dr";
136                         reg = <0x23000 0x1000>;
137                         #address-cells = <1>;
138                         #size-cells = <0>;
139                         interrupt-parent = <&ipic>;
140                         interrupts = <38 0x8>;
141                         dr_mode = "otg";
142                         phy_type = "ulpi";
143                 };
144
145                 mdio@24520 {
146                         #address-cells = <1>;
147                         #size-cells = <0>;
148                         compatible = "fsl,gianfar-mdio";
149                         reg = <0x24520 0x20>;
150
151                         /* Vitesse 8201 */
152                         phy1c: ethernet-phy@1c {
153                                 interrupt-parent = <&ipic>;
154                                 interrupts = <18 0x8>;
155                                 reg = <0x1c>;
156                                 device_type = "ethernet-phy";
157                         };
158                 };
159
160                 enet0: ethernet@24000 {
161                         cell-index = <0>;
162                         device_type = "network";
163                         model = "TSEC";
164                         compatible = "gianfar";
165                         reg = <0x24000 0x1000>;
166                         local-mac-address = [ 00 00 00 00 00 00 ];
167                         interrupts = <32 0x8 33 0x8 34 0x8>;
168                         interrupt-parent = <&ipic>;
169                         phy-handle = <&phy1c>;
170                         linux,network-index = <0>;
171                 };
172
173                 serial0: serial@4500 {
174                         cell-index = <0>;
175                         device_type = "serial";
176                         compatible = "ns16550";
177                         reg = <0x4500 0x100>;
178                         clock-frequency = <0>;          // from bootloader
179                         interrupts = <9 0x8>;
180                         interrupt-parent = <&ipic>;
181                 };
182
183                 serial1: serial@4600 {
184                         cell-index = <1>;
185                         device_type = "serial";
186                         compatible = "ns16550";
187                         reg = <0x4600 0x100>;
188                         clock-frequency = <0>;          // from bootloader
189                         interrupts = <10 0x8>;
190                         interrupt-parent = <&ipic>;
191                 };
192
193                 crypto@30000 {
194                         compatible = "fsl,sec2.0";
195                         reg = <0x30000 0x10000>;
196                         interrupts = <11 0x8>;
197                         interrupt-parent = <&ipic>;
198                         fsl,num-channels = <4>;
199                         fsl,channel-fifo-len = <24>;
200                         fsl,exec-units-mask = <0x7e>;
201                         fsl,descriptor-types-mask = <0x01010ebf>;
202                 };
203
204                 ipic: pic@700 {
205                         interrupt-controller;
206                         #address-cells = <0>;
207                         #interrupt-cells = <2>;
208                         reg = <0x700 0x100>;
209                         device_type = "ipic";
210                 };
211         };
212
213         pci0: pci@e0008600 {
214                 cell-index = <2>;
215                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
216                 interrupt-map = <
217                                 /* IDSEL 0x0F - PCI Slot */
218                                 0x7800 0x0 0x0 0x1 &ipic 20 0x8 /* PCI_INTA */
219                                 0x7800 0x0 0x0 0x2 &ipic 21 0x8 /* PCI_INTB */
220                                  >;
221                 interrupt-parent = <&ipic>;
222                 interrupts = <67 0x8>;
223                 bus-range = <0x1 0x1>;
224                 ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
225                           0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
226                           0x01000000 0x0 0x00000000 0xe3000000 0x0 0x01000000>;
227                 clock-frequency = <66666666>;
228                 #interrupt-cells = <1>;
229                 #size-cells = <2>;
230                 #address-cells = <3>;
231                 reg = <0xe0008600 0x100         /* internal registers */
232                        0xe0008380 0x8>;         /* config space access registers */
233                 compatible = "fsl,mpc8349-pci";
234                 device_type = "pci";
235         };
236 };