arch/powerpc/boot/dts/mpc832x_rdb.dts

   1 /*
   2  * MPC832x RDB Device Tree Source
   3  *
   4  * Copyright 2007 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 /dts-v1/;
  13
  14 / {
  15         model = "MPC8323ERDB";
  16         compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB";
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19
  20         aliases {
  21                 ethernet0 = &enet0;
  22                 ethernet1 = &enet1;
  23                 serial0 = &serial0;
  24                 serial1 = &serial1;
  25                 pci0 = &pci0;
  26         };
  27
  28         cpus {
  29                 #address-cells = <1>;
  30                 #size-cells = <0>;
  31
  32                 PowerPC,8323@0 {
  33                         device_type = "cpu";
  34                         reg = <0x0>;
  35                         d-cache-line-size = <0x20>;     // 32 bytes
  36                         i-cache-line-size = <0x20>;     // 32 bytes
  37                         d-cache-size = <16384>; // L1, 16K
  38                         i-cache-size = <16384>; // L1, 16K
  39                         timebase-frequency = <0>;
  40                         bus-frequency = <0>;
  41                         clock-frequency = <0>;
  42                 };
  43         };
  44
  45         memory {
  46                 device_type = "memory";
  47                 reg = <0x00000000 0x04000000>;
  48         };
  49
  50         soc8323@e0000000 {
  51                 #address-cells = <1>;
  52                 #size-cells = <1>;
  53                 device_type = "soc";
  54                 ranges = <0x0 0xe0000000 0x00100000>;
  55                 reg = <0xe0000000 0x00000200>;
  56                 bus-frequency = <0>;
  57
  58                 wdt@200 {
  59                         device_type = "watchdog";
  60                         compatible = "mpc83xx_wdt";
  61                         reg = <0x200 0x100>;
  62                 };
  63
  64                 i2c@3000 {
  65                         #address-cells = <1>;
  66                         #size-cells = <0>;
  67                         cell-index = <0>;
  68                         compatible = "fsl-i2c";
  69                         reg = <0x3000 0x100>;
  70                         interrupts = <14 0x8>;
  71                         interrupt-parent = <&ipic>;
  72                         dfsrr;
  73                 };
  74
  75                 serial0: serial@4500 {
  76                         cell-index = <0>;
  77                         device_type = "serial";
  78                         compatible = "ns16550";
  79                         reg = <0x4500 0x100>;
  80                         clock-frequency = <0>;
  81                         interrupts = <9 0x8>;
  82                         interrupt-parent = <&ipic>;
  83                 };
  84
  85                 serial1: serial@4600 {
  86                         cell-index = <1>;
  87                         device_type = "serial";
  88                         compatible = "ns16550";
  89                         reg = <0x4600 0x100>;
  90                         clock-frequency = <0>;
  91                         interrupts = <10 0x8>;
  92                         interrupt-parent = <&ipic>;
  93                 };
  94
  95                 dma@82a8 {
  96                         #address-cells = <1>;
  97                         #size-cells = <1>;
  98                         compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
  99                         reg = <0x82a8 4>;
 100                         ranges = <0 0x8100 0x1a8>;
 101                         interrupt-parent = <&ipic>;
 102                         interrupts = <71 8>;
 103                         cell-index = <0>;
 104                         dma-channel@0 {
 105                                 compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
 106                                 reg = <0 0x80>;
 107                                 interrupt-parent = <&ipic>;
 108                                 interrupts = <71 8>;
 109                         };
 110                         dma-channel@80 {
 111                                 compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
 112                                 reg = <0x80 0x80>;
 113                                 interrupt-parent = <&ipic>;
 114                                 interrupts = <71 8>;
 115                         };
 116                         dma-channel@100 {
 117                                 compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
 118                                 reg = <0x100 0x80>;
 119                                 interrupt-parent = <&ipic>;
 120                                 interrupts = <71 8>;
 121                         };
 122                         dma-channel@180 {
 123                                 compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
 124                                 reg = <0x180 0x28>;
 125                                 interrupt-parent = <&ipic>;
 126                                 interrupts = <71 8>;
 127                         };
 128                 };
 129
 130                 crypto@30000 {
 131                         device_type = "crypto";
 132                         model = "SEC2";
 133                         compatible = "talitos";
 134                         reg = <0x30000 0x7000>;
 135                         interrupts = <11 0x8>;
 136                         interrupt-parent = <&ipic>;
 137                         /* Rev. 2.2 */
 138                         num-channels = <1>;
 139                         channel-fifo-len = <24>;
 140                         exec-units-mask = <0x0000004c>;
 141                         descriptor-types-mask = <0x0122003f>;
 142                 };
 143
 144                 ipic:pic@700 {
 145                         interrupt-controller;
 146                         #address-cells = <0>;
 147                         #interrupt-cells = <2>;
 148                         reg = <0x700 0x100>;
 149                         device_type = "ipic";
 150                 };
 151
 152                 par_io@1400 {
 153                         reg = <0x1400 0x100>;
 154                         device_type = "par_io";
 155                         num-ports = <7>;
 156
 157                         ucc2pio:ucc_pin@02 {
 158                                 pio-map = <
 159                         /* port  pin  dir  open_drain  assignment  has_irq */
 160                                         3  4  3  0  2  0        /* MDIO */
 161                                         3  5  1  0  2  0        /* MDC */
 162                                         3 21  2  0  1  0        /* RX_CLK (CLK16) */
 163                                         3 23  2  0  1  0        /* TX_CLK (CLK3) */
 164                                         0 18  1  0  1  0        /* TxD0 */
 165                                         0 19  1  0  1  0        /* TxD1 */
 166                                         0 20  1  0  1  0        /* TxD2 */
 167                                         0 21  1  0  1  0        /* TxD3 */
 168                                         0 22  2  0  1  0        /* RxD0 */
 169                                         0 23  2  0  1  0        /* RxD1 */
 170                                         0 24  2  0  1  0        /* RxD2 */
 171                                         0 25  2  0  1  0        /* RxD3 */
 172                                         0 26  2  0  1  0        /* RX_ER */
 173                                         0 27  1  0  1  0        /* TX_ER */
 174                                         0 28  2  0  1  0        /* RX_DV */
 175                                         0 29  2  0  1  0        /* COL */
 176                                         0 30  1  0  1  0        /* TX_EN */
 177                                         0 31  2  0  1  0>;      /* CRS */
 178                         };
 179                         ucc3pio:ucc_pin@03 {
 180                                 pio-map = <
 181                         /* port  pin  dir  open_drain  assignment  has_irq */
 182                                         0 13  2  0  1  0        /* RX_CLK (CLK9) */
 183                                         3 24  2  0  1  0        /* TX_CLK (CLK10) */
 184                                         1  0  1  0  1  0        /* TxD0 */
 185                                         1  1  1  0  1  0        /* TxD1 */
 186                                         1  2  1  0  1  0        /* TxD2 */
 187                                         1  3  1  0  1  0        /* TxD3 */
 188                                         1  4  2  0  1  0        /* RxD0 */
 189                                         1  5  2  0  1  0        /* RxD1 */
 190                                         1  6  2  0  1  0        /* RxD2 */
 191                                         1  7  2  0  1  0        /* RxD3 */
 192                                         1  8  2  0  1  0        /* RX_ER */
 193                                         1  9  1  0  1  0        /* TX_ER */
 194                                         1 10  2  0  1  0        /* RX_DV */
 195                                         1 11  2  0  1  0        /* COL */
 196                                         1 12  1  0  1  0        /* TX_EN */
 197                                         1 13  2  0  1  0>;      /* CRS */
 198                         };
 199                 };
 200         };
 201
 202         qe@e0100000 {
 203                 #address-cells = <1>;
 204                 #size-cells = <1>;
 205                 device_type = "qe";
 206                 compatible = "fsl,qe";
 207                 ranges = <0x0 0xe0100000 0x00100000>;
 208                 reg = <0xe0100000 0x480>;
 209                 brg-frequency = <0>;
 210                 bus-frequency = <198000000>;
 211
 212                 muram@10000 {
 213                         #address-cells = <1>;
 214                         #size-cells = <1>;
 215                         compatible = "fsl,qe-muram", "fsl,cpm-muram";
 216                         ranges = <0x0 0x00010000 0x00004000>;
 217
 218                         data-only@0 {
 219                                 compatible = "fsl,qe-muram-data",
 220                                              "fsl,cpm-muram-data";
 221                                 reg = <0x0 0x4000>;
 222                         };
 223                 };
 224
 225                 spi@4c0 {
 226                         cell-index = <0>;
 227                         compatible = "fsl,spi";
 228                         reg = <0x4c0 0x40>;
 229                         interrupts = <2>;
 230                         interrupt-parent = <&qeic>;
 231                         mode = "cpu-qe";
 232                 };
 233
 234                 spi@500 {
 235                         cell-index = <1>;
 236                         compatible = "fsl,spi";
 237                         reg = <0x500 0x40>;
 238                         interrupts = <1>;
 239                         interrupt-parent = <&qeic>;
 240                         mode = "cpu";
 241                 };
 242
 243                 enet0: ucc@3000 {
 244                         device_type = "network";
 245                         compatible = "ucc_geth";
 246                         cell-index = <2>;
 247                         reg = <0x3000 0x200>;
 248                         interrupts = <33>;
 249                         interrupt-parent = <&qeic>;
 250                         local-mac-address = [ 00 00 00 00 00 00 ];
 251                         rx-clock-name = "clk16";
 252                         tx-clock-name = "clk3";
 253                         phy-handle = <&phy00>;
 254                         pio-handle = <&ucc2pio>;
 255                 };
 256
 257                 enet1: ucc@2200 {
 258                         device_type = "network";
 259                         compatible = "ucc_geth";
 260                         cell-index = <3>;
 261                         reg = <0x2200 0x200>;
 262                         interrupts = <34>;
 263                         interrupt-parent = <&qeic>;
 264                         local-mac-address = [ 00 00 00 00 00 00 ];
 265                         rx-clock-name = "clk9";
 266                         tx-clock-name = "clk10";
 267                         phy-handle = <&phy04>;
 268                         pio-handle = <&ucc3pio>;
 269                 };
 270
 271                 mdio@3120 {
 272                         #address-cells = <1>;
 273                         #size-cells = <0>;
 274                         reg = <0x3120 0x18>;
 275                         compatible = "fsl,ucc-mdio";
 276
 277                         phy00:ethernet-phy@00 {
 278                                 interrupt-parent = <&ipic>;
 279                                 interrupts = <0>;
 280                                 reg = <0x0>;
 281                                 device_type = "ethernet-phy";
 282                         };
 283                         phy04:ethernet-phy@04 {
 284                                 interrupt-parent = <&ipic>;
 285                                 interrupts = <0>;
 286                                 reg = <0x4>;
 287                                 device_type = "ethernet-phy";
 288                         };
 289                 };
 290
 291                 qeic:interrupt-controller@80 {
 292                         interrupt-controller;
 293                         compatible = "fsl,qe-ic";
 294                         #address-cells = <0>;
 295                         #interrupt-cells = <1>;
 296                         reg = <0x80 0x80>;
 297                         big-endian;
 298                         interrupts = <32 0x8 33 0x8>; //high:32 low:33
 299                         interrupt-parent = <&ipic>;
 300                 };
 301         };
 302
 303         pci0: pci@e0008500 {
 304                 cell-index = <1>;
 305                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 306                 interrupt-map = <
 307                                 /* IDSEL 0x10 AD16 (USB) */
 308                                  0x8000 0x0 0x0 0x1 &ipic 17 0x8
 309
 310                                 /* IDSEL 0x11 AD17 (Mini1)*/
 311                                  0x8800 0x0 0x0 0x1 &ipic 18 0x8
 312                                  0x8800 0x0 0x0 0x2 &ipic 19 0x8
 313                                  0x8800 0x0 0x0 0x3 &ipic 20 0x8
 314                                  0x8800 0x0 0x0 0x4 &ipic 48 0x8
 315
 316                                 /* IDSEL 0x12 AD18 (PCI/Mini2) */
 317                                  0x9000 0x0 0x0 0x1 &ipic 19 0x8
 318                                  0x9000 0x0 0x0 0x2 &ipic 20 0x8
 319                                  0x9000 0x0 0x0 0x3 &ipic 48 0x8
 320                                  0x9000 0x0 0x0 0x4 &ipic 17 0x8>;
 321
 322                 interrupt-parent = <&ipic>;
 323                 interrupts = <66 0x8>;
 324                 bus-range = <0x0 0x0>;
 325                 ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
 326                           0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 327                           0x01000000 0x0 0xd0000000 0xd0000000 0x0 0x04000000>;
 328                 clock-frequency = <0>;
 329                 #interrupt-cells = <1>;
 330                 #size-cells = <2>;
 331                 #address-cells = <3>;
 332                 reg = <0xe0008500 0x100>;
 333                 compatible = "fsl,mpc8349-pci";
 334                 device_type = "pci";
 335         };
 336 };