2 * MPC8315E RDB Device Tree Source
4 * Copyright 2007 Freescale Semiconductor Inc.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
15 compatible = "fsl,mpc8315erdb";
34 d-cache-line-size = <32>;
35 i-cache-line-size = <32>;
36 d-cache-size = <16384>;
37 i-cache-size = <16384>;
38 timebase-frequency = <0>; // from bootloader
39 bus-frequency = <0>; // from bootloader
40 clock-frequency = <0>; // from bootloader
45 device_type = "memory";
46 reg = <0x00000000 0x08000000>; // 128MB at 0
52 compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
53 reg = <0xe0005000 0x1000>;
55 interrupt-parent = <&ipic>;
57 // CS0 and CS1 are swapped when
58 // booting from nand, but the
59 // addresses are the same.
60 ranges = <0 0 0xfe000000 0x00800000
61 1 0 0xe0600000 0x00002000
62 2 0 0xf0000000 0x00020000
63 3 0 0xfa000000 0x00008000>;
68 compatible = "cfi-flash";
77 compatible = "fsl,mpc8315-fcm-nand",
87 reg = <0x100000 0x300000>;
90 reg = <0x400000 0x1c00000>;
99 compatible = "simple-bus";
100 ranges = <0 0xe0000000 0x00100000>;
101 reg = <0xe0000000 0x00000200>;
105 device_type = "watchdog";
106 compatible = "mpc83xx_wdt";
111 #address-cells = <1>;
114 compatible = "fsl-i2c";
115 reg = <0x3000 0x100>;
117 interrupt-parent = < &ipic >;
121 compatible = "dallas,ds1339";
128 compatible = "fsl,spi";
129 reg = <0x7000 0x1000>;
131 interrupt-parent = < &ipic >;
136 compatible = "fsl-usb2-dr";
137 reg = <0x23000 0x1000>;
138 #address-cells = <1>;
140 interrupt-parent = < &ipic >;
146 #address-cells = <1>;
148 compatible = "fsl,gianfar-mdio";
149 reg = <0x24520 0x20>;
150 phy0: ethernet-phy@0 {
151 interrupt-parent = < &ipic >;
154 device_type = "ethernet-phy";
156 phy1: ethernet-phy@1 {
157 interrupt-parent = < &ipic >;
160 device_type = "ethernet-phy";
164 enet0: ethernet@24000 {
166 device_type = "network";
168 compatible = "gianfar";
169 reg = <0x24000 0x1000>;
170 local-mac-address = [ 00 00 00 00 00 00 ];
171 interrupts = <32 8 33 8 34 8>;
172 interrupt-parent = < &ipic >;
173 phy-handle = < &phy0 >;
176 enet1: ethernet@25000 {
178 device_type = "network";
180 compatible = "gianfar";
181 reg = <0x25000 0x1000>;
182 local-mac-address = [ 00 00 00 00 00 00 ];
183 interrupts = <35 8 36 8 37 8>;
184 interrupt-parent = < &ipic >;
185 phy-handle = < &phy1 >;
188 serial0: serial@4500 {
190 device_type = "serial";
191 compatible = "ns16550";
192 reg = <0x4500 0x100>;
193 clock-frequency = <0>;
195 interrupt-parent = < &ipic >;
198 serial1: serial@4600 {
200 device_type = "serial";
201 compatible = "ns16550";
202 reg = <0x4600 0x100>;
203 clock-frequency = <0>;
205 interrupt-parent = < &ipic >;
210 device_type = "crypto";
211 compatible = "talitos";
212 reg = <0x30000 0x10000>;
214 interrupt-parent = < &ipic >;
215 /* Rev. 3.0 geometry */
217 channel-fifo-len = <24>;
218 exec-units-mask = <0x000001fe>;
219 descriptor-types-mask = <0x03ab0ebf>;
223 compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
224 reg = <0x18000 0x1000>;
227 interrupt-parent = < &ipic >;
231 compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
232 reg = <0x19000 0x1000>;
235 interrupt-parent = < &ipic >;
239 * interrupts cell = <intr #, sense>
240 * sense values match linux IORESOURCE_IRQ_* defines:
241 * sense == 8: Level, low assertion
242 * sense == 2: Edge, high-to-low change
244 ipic: interrupt-controller@700 {
245 interrupt-controller;
246 #address-cells = <0>;
247 #interrupt-cells = <2>;
249 device_type = "ipic";
254 interrupt-map-mask = <0xf800 0 0 7>;
256 /* IDSEL 0x0E -mini PCI */
257 0x7000 0 0 1 &ipic 18 8
258 0x7000 0 0 2 &ipic 18 8
259 0x7000 0 0 3 &ipic 18 8
260 0x7000 0 0 4 &ipic 18 8
262 /* IDSEL 0x0F -mini PCI */
263 0x7800 0 0 1 &ipic 17 8
264 0x7800 0 0 2 &ipic 17 8
265 0x7800 0 0 3 &ipic 17 8
266 0x7800 0 0 4 &ipic 17 8
268 /* IDSEL 0x10 - PCI slot */
269 0x8000 0 0 1 &ipic 48 8
270 0x8000 0 0 2 &ipic 17 8
271 0x8000 0 0 3 &ipic 48 8
272 0x8000 0 0 4 &ipic 17 8>;
273 interrupt-parent = < &ipic >;
276 ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
277 0x42000000 0 0x80000000 0x80000000 0 0x10000000
278 0x01000000 0 0x00000000 0xe0300000 0 0x00100000>;
279 clock-frequency = <66666666>;
280 #interrupt-cells = <1>;
282 #address-cells = <3>;
283 reg = <0xe0008500 0x100>;
284 compatible = "fsl,mpc8349-pci";