arch/mips/au1000/common/reset.c

   1 /*
   2  *
   3  * BRIEF MODULE DESCRIPTION
   4  *      Au1000 reset routines.
   5  *
   6  * Copyright 2001 MontaVista Software Inc.
   7  * Author: MontaVista Software, Inc.
   8  *              ppopov@mvista.com or source@mvista.com
   9  *
  10  *  This program is free software; you can redistribute  it and/or modify it
  11  *  under  the terms of  the GNU General  Public License as published by the
  12  *  Free Software Foundation;  either version 2 of the  License, or (at your
  13  *  option) any later version.
  14  *
  15  *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
  16  *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
  17  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
  18  *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
  19  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  20  *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
  21  *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  22  *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
  23  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  24  *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  25  *
  26  *  You should have received a copy of the  GNU General Public License along
  27  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  28  *  675 Mass Ave, Cambridge, MA 02139, USA.
  29  */
  30
  31 #include <asm/mach-au1x00/au1000.h>
  32
  33 extern int au_sleep(void);
  34 extern void (*flush_cache_all)(void);
  35
  36 void au1000_restart(char *command)
  37 {
  38         /* Set all integrated peripherals to disabled states */
  39         extern void board_reset(void);
  40         u32 prid = read_c0_prid();
  41
  42         printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n");
  43         switch (prid & 0xFF000000)
  44         {
  45         case 0x00000000: /* Au1000 */
  46                 au_writel(0x02, 0xb0000010); /* ac97_enable */
  47                 au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
  48                 asm("sync");
  49                 au_writel(0x00, 0xb017fffc); /* usbh_enable */
  50                 au_writel(0x00, 0xb0200058); /* usbd_enable */
  51                 au_writel(0x00, 0xb0300040); /* ir_enable */
  52                 au_writel(0x00, 0xb4004104); /* mac dma */
  53                 au_writel(0x00, 0xb4004114); /* mac dma */
  54                 au_writel(0x00, 0xb4004124); /* mac dma */
  55                 au_writel(0x00, 0xb4004134); /* mac dma */
  56                 au_writel(0x00, 0xb0520000); /* macen0 */
  57                 au_writel(0x00, 0xb0520004); /* macen1 */
  58                 au_writel(0x00, 0xb1000008); /* i2s_enable  */
  59                 au_writel(0x00, 0xb1100100); /* uart0_enable */
  60                 au_writel(0x00, 0xb1200100); /* uart1_enable */
  61                 au_writel(0x00, 0xb1300100); /* uart2_enable */
  62                 au_writel(0x00, 0xb1400100); /* uart3_enable */
  63                 au_writel(0x02, 0xb1600100); /* ssi0_enable */
  64                 au_writel(0x02, 0xb1680100); /* ssi1_enable */
  65                 au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
  66                 au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
  67                 au_writel(0x00, 0xb1900028); /* sys_clksrc */
  68                 au_writel(0x10, 0xb1900060); /* sys_cpupll */
  69                 au_writel(0x00, 0xb1900064); /* sys_auxpll */
  70                 au_writel(0x00, 0xb1900100); /* sys_pininputen */
  71                 break;
  72         case 0x01000000: /* Au1500 */
  73                 au_writel(0x02, 0xb0000010); /* ac97_enable */
  74                 au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
  75                 asm("sync");
  76                 au_writel(0x00, 0xb017fffc); /* usbh_enable */
  77                 au_writel(0x00, 0xb0200058); /* usbd_enable */
  78                 au_writel(0x00, 0xb4004104); /* mac dma */
  79                 au_writel(0x00, 0xb4004114); /* mac dma */
  80                 au_writel(0x00, 0xb4004124); /* mac dma */
  81                 au_writel(0x00, 0xb4004134); /* mac dma */
  82                 au_writel(0x00, 0xb1520000); /* macen0 */
  83                 au_writel(0x00, 0xb1520004); /* macen1 */
  84                 au_writel(0x00, 0xb1100100); /* uart0_enable */
  85                 au_writel(0x00, 0xb1400100); /* uart3_enable */
  86                 au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
  87                 au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
  88                 au_writel(0x00, 0xb1900028); /* sys_clksrc */
  89                 au_writel(0x10, 0xb1900060); /* sys_cpupll */
  90                 au_writel(0x00, 0xb1900064); /* sys_auxpll */
  91                 au_writel(0x00, 0xb1900100); /* sys_pininputen */
  92                 break;
  93         case 0x02000000: /* Au1100 */
  94                 au_writel(0x02, 0xb0000010); /* ac97_enable */
  95                 au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
  96                 asm("sync");
  97                 au_writel(0x00, 0xb017fffc); /* usbh_enable */
  98                 au_writel(0x00, 0xb0200058); /* usbd_enable */
  99                 au_writel(0x00, 0xb0300040); /* ir_enable */
 100                 au_writel(0x00, 0xb4004104); /* mac dma */
 101                 au_writel(0x00, 0xb4004114); /* mac dma */
 102                 au_writel(0x00, 0xb4004124); /* mac dma */
 103                 au_writel(0x00, 0xb4004134); /* mac dma */
 104                 au_writel(0x00, 0xb0520000); /* macen0 */
 105                 au_writel(0x00, 0xb1000008); /* i2s_enable  */
 106                 au_writel(0x00, 0xb1100100); /* uart0_enable */
 107                 au_writel(0x00, 0xb1200100); /* uart1_enable */
 108                 au_writel(0x00, 0xb1400100); /* uart3_enable */
 109                 au_writel(0x02, 0xb1600100); /* ssi0_enable */
 110                 au_writel(0x02, 0xb1680100); /* ssi1_enable */
 111                 au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
 112                 au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
 113                 au_writel(0x00, 0xb1900028); /* sys_clksrc */
 114                 au_writel(0x10, 0xb1900060); /* sys_cpupll */
 115                 au_writel(0x00, 0xb1900064); /* sys_auxpll */
 116                 au_writel(0x00, 0xb1900100); /* sys_pininputen */
 117                 break;
 118         case 0x03000000: /* Au1550 */
 119                 au_writel(0x00, 0xb1a00004); /* psc 0 */
 120                 au_writel(0x00, 0xb1b00004); /* psc 1 */
 121                 au_writel(0x00, 0xb0a00004); /* psc 2 */
 122                 au_writel(0x00, 0xb0b00004); /* psc 3 */
 123                 au_writel(0x00, 0xb017fffc); /* usbh_enable */
 124                 au_writel(0x00, 0xb0200058); /* usbd_enable */
 125                 au_writel(0x00, 0xb4004104); /* mac dma */
 126                 au_writel(0x00, 0xb4004114); /* mac dma */
 127                 au_writel(0x00, 0xb4004124); /* mac dma */
 128                 au_writel(0x00, 0xb4004134); /* mac dma */
 129                 au_writel(0x00, 0xb1520000); /* macen0 */
 130                 au_writel(0x00, 0xb1520004); /* macen1 */
 131                 au_writel(0x00, 0xb1100100); /* uart0_enable */
 132                 au_writel(0x00, 0xb1200100); /* uart1_enable */
 133                 au_writel(0x00, 0xb1400100); /* uart3_enable */
 134                 au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
 135                 au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
 136                 au_writel(0x00, 0xb1900028); /* sys_clksrc */
 137                 au_writel(0x10, 0xb1900060); /* sys_cpupll */
 138                 au_writel(0x00, 0xb1900064); /* sys_auxpll */
 139                 au_writel(0x00, 0xb1900100); /* sys_pininputen */
 140                 break;
 141
 142         default:
 143                 break;
 144         }
 145
 146         set_c0_status(ST0_BEV | ST0_ERL);
 147         change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
 148         flush_cache_all();
 149         write_c0_wired(0);
 150
 151         /* Give board a chance to do a hardware reset */
 152         board_reset();
 153
 154         /* Jump to the beggining in case board_reset() is empty */
 155         __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
 156 }
 157
 158 void au1000_halt(void)
 159 {
 160 #if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
 161         /* power off system */
 162         printk("\n** Powering off...\n");
 163         au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C);
 164         au_sync();
 165         while(1); /* should not get here */
 166 #else
 167         printk(KERN_NOTICE "\n** You can safely turn off the power\n");
 168 #ifdef CONFIG_MIPS_MIRAGE
 169         au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
 170 #endif
 171 #ifdef CONFIG_MIPS_DB1200
 172         au_writew(au_readw(0xB980001C) | (1<<14), 0xB980001C);
 173 #endif
 174 #ifdef CONFIG_PM
 175         au_sleep();
 176
 177         /* should not get here */
 178         printk(KERN_ERR "Unable to put cpu in sleep mode\n");
 179         while(1);
 180 #else
 181         while (1)
 182                 __asm__(".set\tmips3\n\t"
 183                         "wait\n\t"
 184                         ".set\tmips0");
 185 #endif
 186 #endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */
 187 }
 188
 189 void au1000_power_off(void)
 190 {
 191         au1000_halt();
 192 }