2 * linux/arch/m68k/kernel/setup.c
4 * Copyright (C) 1995 Hamish Macdonald
8 * This file handles the architecture-dependent parts of system setup
11 #include <linux/kernel.h>
13 #include <linux/sched.h>
14 #include <linux/delay.h>
15 #include <linux/interrupt.h>
17 #include <linux/console.h>
18 #include <linux/genhd.h>
19 #include <linux/errno.h>
20 #include <linux/string.h>
21 #include <linux/init.h>
22 #include <linux/bootmem.h>
23 #include <linux/seq_file.h>
24 #include <linux/module.h>
25 #include <linux/initrd.h>
27 #include <asm/bootinfo.h>
28 #include <asm/setup.h>
32 #include <asm/machdep.h>
34 #include <asm/amigahw.h>
37 #include <asm/atarihw.h>
38 #include <asm/atari_stram.h>
44 #if !FPSTATESIZE || !NR_IRQS
45 #warning No CPU/platform type selected, your kernel will not work!
46 #warning Are you building an allnoconfig kernel?
49 unsigned long m68k_machtype;
50 EXPORT_SYMBOL(m68k_machtype);
51 unsigned long m68k_cputype;
52 EXPORT_SYMBOL(m68k_cputype);
53 unsigned long m68k_fputype;
54 unsigned long m68k_mmutype;
55 EXPORT_SYMBOL(m68k_mmutype);
57 unsigned long vme_brdtype;
58 EXPORT_SYMBOL(vme_brdtype);
62 EXPORT_SYMBOL(m68k_is040or060);
65 extern unsigned long availmem;
68 EXPORT_SYMBOL(m68k_num_memory);
69 int m68k_realnum_memory;
70 EXPORT_SYMBOL(m68k_realnum_memory);
71 unsigned long m68k_memoffset;
72 struct mem_info m68k_memory[NUM_MEMINFO];
73 EXPORT_SYMBOL(m68k_memory);
75 struct mem_info m68k_ramdisk;
77 static char m68k_command_line[CL_SIZE];
79 void (*mach_sched_init) (irq_handler_t handler) __initdata = NULL;
80 /* machine dependent irq functions */
81 void (*mach_init_IRQ) (void) __initdata = NULL;
82 void (*mach_get_model) (char *model);
83 int (*mach_get_hardware_list) (char *buffer);
84 /* machine dependent timer functions */
85 unsigned long (*mach_gettimeoffset) (void);
86 int (*mach_hwclk) (int, struct rtc_time*);
87 EXPORT_SYMBOL(mach_hwclk);
88 int (*mach_set_clock_mmss) (unsigned long);
89 unsigned int (*mach_get_ss)(void);
90 int (*mach_get_rtc_pll)(struct rtc_pll_info *);
91 int (*mach_set_rtc_pll)(struct rtc_pll_info *);
92 EXPORT_SYMBOL(mach_get_ss);
93 EXPORT_SYMBOL(mach_get_rtc_pll);
94 EXPORT_SYMBOL(mach_set_rtc_pll);
95 void (*mach_reset)( void );
96 void (*mach_halt)( void );
97 void (*mach_power_off)( void );
98 long mach_max_dma_address = 0x00ffffff; /* default set to the lower 16MB */
99 #ifdef CONFIG_HEARTBEAT
100 void (*mach_heartbeat) (int);
101 EXPORT_SYMBOL(mach_heartbeat);
103 #ifdef CONFIG_M68K_L2_CACHE
104 void (*mach_l2_flush) (int);
106 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
107 void (*mach_beep)(unsigned int, unsigned int);
108 EXPORT_SYMBOL(mach_beep);
110 #if defined(CONFIG_ISA) && defined(MULTI_ISA)
113 EXPORT_SYMBOL(isa_type);
114 EXPORT_SYMBOL(isa_sex);
117 extern int amiga_parse_bootinfo(const struct bi_record *);
118 extern int atari_parse_bootinfo(const struct bi_record *);
119 extern int mac_parse_bootinfo(const struct bi_record *);
120 extern int q40_parse_bootinfo(const struct bi_record *);
121 extern int bvme6000_parse_bootinfo(const struct bi_record *);
122 extern int mvme16x_parse_bootinfo(const struct bi_record *);
123 extern int mvme147_parse_bootinfo(const struct bi_record *);
124 extern int hp300_parse_bootinfo(const struct bi_record *);
126 extern void config_amiga(void);
127 extern void config_atari(void);
128 extern void config_mac(void);
129 extern void config_sun3(void);
130 extern void config_apollo(void);
131 extern void config_mvme147(void);
132 extern void config_mvme16x(void);
133 extern void config_bvme6000(void);
134 extern void config_hp300(void);
135 extern void config_q40(void);
136 extern void config_sun3x(void);
138 #define MASK_256K 0xfffc0000
140 extern void paging_init(void);
142 static void __init m68k_parse_bootinfo(const struct bi_record *record)
144 while (record->tag != BI_LAST) {
146 const unsigned long *data = record->data;
148 switch (record->tag) {
153 /* Already set up by head.S */
157 if (m68k_num_memory < NUM_MEMINFO) {
158 m68k_memory[m68k_num_memory].addr = data[0];
159 m68k_memory[m68k_num_memory].size = data[1];
162 printk("m68k_parse_bootinfo: too many memory chunks\n");
166 m68k_ramdisk.addr = data[0];
167 m68k_ramdisk.size = data[1];
170 case BI_COMMAND_LINE:
171 strlcpy(m68k_command_line, (const char *)data,
172 sizeof(m68k_command_line));
177 unknown = amiga_parse_bootinfo(record);
178 else if (MACH_IS_ATARI)
179 unknown = atari_parse_bootinfo(record);
180 else if (MACH_IS_MAC)
181 unknown = mac_parse_bootinfo(record);
182 else if (MACH_IS_Q40)
183 unknown = q40_parse_bootinfo(record);
184 else if (MACH_IS_BVME6000)
185 unknown = bvme6000_parse_bootinfo(record);
186 else if (MACH_IS_MVME16x)
187 unknown = mvme16x_parse_bootinfo(record);
188 else if (MACH_IS_MVME147)
189 unknown = mvme147_parse_bootinfo(record);
190 else if (MACH_IS_HP300)
191 unknown = hp300_parse_bootinfo(record);
196 printk("m68k_parse_bootinfo: unknown tag 0x%04x ignored\n",
198 record = (struct bi_record *)((unsigned long)record +
202 m68k_realnum_memory = m68k_num_memory;
203 #ifdef CONFIG_SINGLE_MEMORY_CHUNK
204 if (m68k_num_memory > 1) {
205 printk("Ignoring last %i chunks of physical memory\n",
206 (m68k_num_memory - 1));
212 void __init setup_arch(char **cmdline_p)
214 extern int _etext, _edata, _end;
217 /* The bootinfo is located right after the kernel bss */
218 m68k_parse_bootinfo((const struct bi_record *)&_end);
225 /* FIXME: m68k_fputype is passed in by Penguin booter, which can
226 * be confused by software FPU emulation. BEWARE.
227 * We should really do our own FPU check at startup.
228 * [what do we do with buggy 68LC040s? if we have problems
229 * with them, we should add a test to check_bugs() below] */
230 #ifndef CONFIG_M68KFPU_EMU_ONLY
231 /* clear the fpu if we have one */
232 if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060)) {
233 volatile int zero = 0;
234 asm volatile ("frestore %0" : : "m" (zero));
241 asm (".chip 68060; movec %%pcr,%0; .chip 68k"
243 if (((pcr >> 8) & 0xff) <= 5) {
244 printk("Enabling workaround for errata I14\n");
245 asm (".chip 68060; movec %0,%%pcr; .chip 68k"
246 : : "d" (pcr | 0x20));
250 init_mm.start_code = PAGE_OFFSET;
251 init_mm.end_code = (unsigned long) &_etext;
252 init_mm.end_data = (unsigned long) &_edata;
253 init_mm.brk = (unsigned long) &_end;
255 *cmdline_p = m68k_command_line;
256 memcpy(boot_command_line, *cmdline_p, CL_SIZE);
260 #ifdef CONFIG_DUMMY_CONSOLE
261 conswitchp = &dummy_con;
264 switch (m68k_machtype) {
290 #ifdef CONFIG_MVME147
295 #ifdef CONFIG_MVME16x
300 #ifdef CONFIG_BVME6000
321 panic("No configuration setup");
327 for (i = 1; i < m68k_num_memory; i++)
328 free_bootmem_node(NODE_DATA(i), m68k_memory[i].addr,
329 m68k_memory[i].size);
330 #ifdef CONFIG_BLK_DEV_INITRD
331 if (m68k_ramdisk.size) {
332 reserve_bootmem_node(__virt_to_node(phys_to_virt(m68k_ramdisk.addr)),
333 m68k_ramdisk.addr, m68k_ramdisk.size,
335 initrd_start = (unsigned long)phys_to_virt(m68k_ramdisk.addr);
336 initrd_end = initrd_start + m68k_ramdisk.size;
337 printk("initrd: %08lx - %08lx\n", initrd_start, initrd_end);
343 atari_stram_reserve_pages((void *)availmem);
351 #endif /* !CONFIG_SUN3 */
353 /* set ISA defs early as possible */
354 #if defined(CONFIG_ISA) && defined(MULTI_ISA)
356 isa_type = ISA_TYPE_Q40;
360 if (MACH_IS_AMIGA && AMIGAHW_PRESENT(GG2_ISA)) {
361 isa_type = ISA_TYPE_GG2;
365 #ifdef CONFIG_AMIGA_PCMCIA
366 if (MACH_IS_AMIGA && AMIGAHW_PRESENT(PCMCIA)) {
367 isa_type = ISA_TYPE_AG;
374 static int show_cpuinfo(struct seq_file *m, void *v)
376 const char *cpu, *mmu, *fpu;
377 unsigned long clockfreq, clockfactor;
379 #define LOOP_CYCLES_68020 (8)
380 #define LOOP_CYCLES_68030 (8)
381 #define LOOP_CYCLES_68040 (3)
382 #define LOOP_CYCLES_68060 (1)
386 clockfactor = LOOP_CYCLES_68020;
387 } else if (CPU_IS_030) {
389 clockfactor = LOOP_CYCLES_68030;
390 } else if (CPU_IS_040) {
392 clockfactor = LOOP_CYCLES_68040;
393 } else if (CPU_IS_060) {
395 clockfactor = LOOP_CYCLES_68060;
401 #ifdef CONFIG_M68KFPU_EMU_ONLY
402 fpu = "none(soft float)";
404 if (m68k_fputype & FPU_68881)
406 else if (m68k_fputype & FPU_68882)
408 else if (m68k_fputype & FPU_68040)
410 else if (m68k_fputype & FPU_68060)
412 else if (m68k_fputype & FPU_SUNFPA)
418 if (m68k_mmutype & MMU_68851)
420 else if (m68k_mmutype & MMU_68030)
422 else if (m68k_mmutype & MMU_68040)
424 else if (m68k_mmutype & MMU_68060)
426 else if (m68k_mmutype & MMU_SUN3)
428 else if (m68k_mmutype & MMU_APOLLO)
433 clockfreq = loops_per_jiffy * HZ * clockfactor;
435 seq_printf(m, "CPU:\t\t%s\n"
438 "Clocking:\t%lu.%1luMHz\n"
439 "BogoMips:\t%lu.%02lu\n"
440 "Calibration:\t%lu loops\n",
442 clockfreq/1000000,(clockfreq/100000)%10,
443 loops_per_jiffy/(500000/HZ),(loops_per_jiffy/(5000/HZ))%100,
448 static void *c_start(struct seq_file *m, loff_t *pos)
450 return *pos < 1 ? (void *)1 : NULL;
452 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
457 static void c_stop(struct seq_file *m, void *v)
460 const struct seq_operations cpuinfo_op = {
464 .show = show_cpuinfo,
467 int get_hardware_list(char *buffer)
475 mach_get_model(model);
477 strcpy(model, "Unknown m68k");
479 len += sprintf(buffer + len, "Model:\t\t%s\n", model);
480 for (mem = 0, i = 0; i < m68k_num_memory; i++)
481 mem += m68k_memory[i].size;
482 len += sprintf(buffer + len, "System Memory:\t%ldK\n", mem >> 10);
484 if (mach_get_hardware_list)
485 len += mach_get_hardware_list(buffer + len);
490 void check_bugs(void)
492 #ifndef CONFIG_M68KFPU_EMU
493 if (m68k_fputype == 0) {
494 printk(KERN_EMERG "*** YOU DO NOT HAVE A FLOATING POINT UNIT, "
495 "WHICH IS REQUIRED BY LINUX/M68K ***\n");
496 printk(KERN_EMERG "Upgrade your hardware or join the FPU "
497 "emulation project\n");
500 #endif /* !CONFIG_M68KFPU_EMU */
504 static int __init adb_probe_sync_enable (char *str) {
505 extern int __adb_probe_sync;
506 __adb_probe_sync = 1;
510 __setup("adb_sync", adb_probe_sync_enable);
511 #endif /* CONFIG_ADB */