arch/ia64/sn/kernel/xpc_main.c

   1 /*
   2  * This file is subject to the terms and conditions of the GNU General Public
   3  * License.  See the file "COPYING" in the main directory of this archive
   4  * for more details.
   5  *
   6  * Copyright (c) 2004-2007 Silicon Graphics, Inc.  All Rights Reserved.
   7  */
   8
   9
  10 /*
  11  * Cross Partition Communication (XPC) support - standard version.
  12  *
  13  *      XPC provides a message passing capability that crosses partition
  14  *      boundaries. This module is made up of two parts:
  15  *
  16  *          partition   This part detects the presence/absence of other
  17  *                      partitions. It provides a heartbeat and monitors
  18  *                      the heartbeats of other partitions.
  19  *
  20  *          channel     This part manages the channels and sends/receives
  21  *                      messages across them to/from other partitions.
  22  *
  23  *      There are a couple of additional functions residing in XP, which
  24  *      provide an interface to XPC for its users.
  25  *
  26  *
  27  *      Caveats:
  28  *
  29  *        . We currently have no way to determine which nasid an IPI came
  30  *          from. Thus, xpc_IPI_send() does a remote AMO write followed by
  31  *          an IPI. The AMO indicates where data is to be pulled from, so
  32  *          after the IPI arrives, the remote partition checks the AMO word.
  33  *          The IPI can actually arrive before the AMO however, so other code
  34  *          must periodically check for this case. Also, remote AMO operations
  35  *          do not reliably time out. Thus we do a remote PIO read solely to
  36  *          know whether the remote partition is down and whether we should
  37  *          stop sending IPIs to it. This remote PIO read operation is set up
  38  *          in a special nofault region so SAL knows to ignore (and cleanup)
  39  *          any errors due to the remote AMO write, PIO read, and/or PIO
  40  *          write operations.
  41  *
  42  *          If/when new hardware solves this IPI problem, we should abandon
  43  *          the current approach.
  44  *
  45  */
  46
  47
  48 #include <linux/kernel.h>
  49 #include <linux/module.h>
  50 #include <linux/init.h>
  51 #include <linux/sched.h>
  52 #include <linux/syscalls.h>
  53 #include <linux/cache.h>
  54 #include <linux/interrupt.h>
  55 #include <linux/delay.h>
  56 #include <linux/reboot.h>
  57 #include <linux/completion.h>
  58 #include <linux/kdebug.h>
  59 #include <asm/sn/intr.h>
  60 #include <asm/sn/sn_sal.h>
  61 #include <asm/uaccess.h>
  62 #include <asm/sn/xpc.h>
  63
  64
  65 /* define two XPC debug device structures to be used with dev_dbg() et al */
  66
  67 struct device_driver xpc_dbg_name = {
  68         .name = "xpc"
  69 };
  70
  71 struct device xpc_part_dbg_subname = {
  72         .bus_id = {0},          /* set to "part" at xpc_init() time */
  73         .driver = &xpc_dbg_name
  74 };
  75
  76 struct device xpc_chan_dbg_subname = {
  77         .bus_id = {0},          /* set to "chan" at xpc_init() time */
  78         .driver = &xpc_dbg_name
  79 };
  80
  81 struct device *xpc_part = &xpc_part_dbg_subname;
  82 struct device *xpc_chan = &xpc_chan_dbg_subname;
  83
  84
  85 static int xpc_kdebug_ignore;
  86
  87
  88 /* systune related variables for /proc/sys directories */
  89
  90 static int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL;
  91 static int xpc_hb_min_interval = 1;
  92 static int xpc_hb_max_interval = 10;
  93
  94 static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL;
  95 static int xpc_hb_check_min_interval = 10;
  96 static int xpc_hb_check_max_interval = 120;
  97
  98 int xpc_disengage_request_timelimit = XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT;
  99 static int xpc_disengage_request_min_timelimit = 0;
 100 static int xpc_disengage_request_max_timelimit = 120;
 101
 102 static ctl_table xpc_sys_xpc_hb_dir[] = {
 103         {
 104                 .ctl_name       = CTL_UNNUMBERED,
 105                 .procname       = "hb_interval",
 106                 .data           = &xpc_hb_interval,
 107                 .maxlen         = sizeof(int),
 108                 .mode           = 0644,
 109                 .proc_handler   = &proc_dointvec_minmax,
 110                 .strategy       = &sysctl_intvec,
 111                 .extra1         = &xpc_hb_min_interval,
 112                 .extra2         = &xpc_hb_max_interval
 113         },
 114         {
 115                 .ctl_name       = CTL_UNNUMBERED,
 116                 .procname       = "hb_check_interval",
 117                 .data           = &xpc_hb_check_interval,
 118                 .maxlen         = sizeof(int),
 119                 .mode           = 0644,
 120                 .proc_handler   = &proc_dointvec_minmax,
 121                 .strategy       = &sysctl_intvec,
 122                 .extra1         = &xpc_hb_check_min_interval,
 123                 .extra2         = &xpc_hb_check_max_interval
 124         },
 125         {}
 126 };
 127 static ctl_table xpc_sys_xpc_dir[] = {
 128         {
 129                 .ctl_name       = CTL_UNNUMBERED,
 130                 .procname       = "hb",
 131                 .mode           = 0555,
 132                 .child          = xpc_sys_xpc_hb_dir
 133         },
 134         {
 135                 .ctl_name       = CTL_UNNUMBERED,
 136                 .procname       = "disengage_request_timelimit",
 137                 .data           = &xpc_disengage_request_timelimit,
 138                 .maxlen         = sizeof(int),
 139                 .mode           = 0644,
 140                 .proc_handler   = &proc_dointvec_minmax,
 141                 .strategy       = &sysctl_intvec,
 142                 .extra1         = &xpc_disengage_request_min_timelimit,
 143                 .extra2         = &xpc_disengage_request_max_timelimit
 144         },
 145         {}
 146 };
 147 static ctl_table xpc_sys_dir[] = {
 148         {
 149                 .ctl_name       = CTL_UNNUMBERED,
 150                 .procname       = "xpc",
 151                 .mode           = 0555,
 152                 .child          = xpc_sys_xpc_dir
 153         },
 154         {}
 155 };
 156 static struct ctl_table_header *xpc_sysctl;
 157
 158 /* non-zero if any remote partition disengage request was timed out */
 159 int xpc_disengage_request_timedout;
 160
 161 /* #of IRQs received */
 162 static atomic_t xpc_act_IRQ_rcvd;
 163
 164 /* IRQ handler notifies this wait queue on receipt of an IRQ */
 165 static DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq);
 166
 167 static unsigned long xpc_hb_check_timeout;
 168
 169 /* notification that the xpc_hb_checker thread has exited */
 170 static DECLARE_COMPLETION(xpc_hb_checker_exited);
 171
 172 /* notification that the xpc_discovery thread has exited */
 173 static DECLARE_COMPLETION(xpc_discovery_exited);
 174
 175
 176 static struct timer_list xpc_hb_timer;
 177
 178
 179 static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *);
 180
 181
 182 static int xpc_system_reboot(struct notifier_block *, unsigned long, void *);
 183 static struct notifier_block xpc_reboot_notifier = {
 184         .notifier_call = xpc_system_reboot,
 185 };
 186
 187 static int xpc_system_die(struct notifier_block *, unsigned long, void *);
 188 static struct notifier_block xpc_die_notifier = {
 189         .notifier_call = xpc_system_die,
 190 };
 191
 192
 193 /*
 194  * Timer function to enforce the timelimit on the partition disengage request.
 195  */
 196 static void
 197 xpc_timeout_partition_disengage_request(unsigned long data)
 198 {
 199         struct xpc_partition *part = (struct xpc_partition *) data;
 200
 201
 202         DBUG_ON(jiffies < part->disengage_request_timeout);
 203
 204         (void) xpc_partition_disengaged(part);
 205
 206         DBUG_ON(part->disengage_request_timeout != 0);
 207         DBUG_ON(xpc_partition_engaged(1UL << XPC_PARTID(part)) != 0);
 208 }
 209
 210
 211 /*
 212  * Notify the heartbeat check thread that an IRQ has been received.
 213  */
 214 static irqreturn_t
 215 xpc_act_IRQ_handler(int irq, void *dev_id)
 216 {
 217         atomic_inc(&xpc_act_IRQ_rcvd);
 218         wake_up_interruptible(&xpc_act_IRQ_wq);
 219         return IRQ_HANDLED;
 220 }
 221
 222
 223 /*
 224  * Timer to produce the heartbeat.  The timer structures function is
 225  * already set when this is initially called.  A tunable is used to
 226  * specify when the next timeout should occur.
 227  */
 228 static void
 229 xpc_hb_beater(unsigned long dummy)
 230 {
 231         xpc_vars->heartbeat++;
 232
 233         if (jiffies >= xpc_hb_check_timeout) {
 234                 wake_up_interruptible(&xpc_act_IRQ_wq);
 235         }
 236
 237         xpc_hb_timer.expires = jiffies + (xpc_hb_interval * HZ);
 238         add_timer(&xpc_hb_timer);
 239 }
 240
 241
 242 /*
 243  * This thread is responsible for nearly all of the partition
 244  * activation/deactivation.
 245  */
 246 static int
 247 xpc_hb_checker(void *ignore)
 248 {
 249         int last_IRQ_count = 0;
 250         int new_IRQ_count;
 251         int force_IRQ=0;
 252
 253
 254         /* this thread was marked active by xpc_hb_init() */
 255
 256         daemonize(XPC_HB_CHECK_THREAD_NAME);
 257
 258         set_cpus_allowed(current, cpumask_of_cpu(XPC_HB_CHECK_CPU));
 259
 260         /* set our heartbeating to other partitions into motion */
 261         xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ);
 262         xpc_hb_beater(0);
 263
 264         while (!(volatile int) xpc_exiting) {
 265
 266                 dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have "
 267                         "been received\n",
 268                         (int) (xpc_hb_check_timeout - jiffies),
 269                         atomic_read(&xpc_act_IRQ_rcvd) - last_IRQ_count);
 270
 271
 272                 /* checking of remote heartbeats is skewed by IRQ handling */
 273                 if (jiffies >= xpc_hb_check_timeout) {
 274                         dev_dbg(xpc_part, "checking remote heartbeats\n");
 275                         xpc_check_remote_hb();
 276
 277                         /*
 278                          * We need to periodically recheck to ensure no
 279                          * IPI/AMO pairs have been missed.  That check
 280                          * must always reset xpc_hb_check_timeout.
 281                          */
 282                         force_IRQ = 1;
 283                 }
 284
 285
 286                 /* check for outstanding IRQs */
 287                 new_IRQ_count = atomic_read(&xpc_act_IRQ_rcvd);
 288                 if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) {
 289                         force_IRQ = 0;
 290
 291                         dev_dbg(xpc_part, "found an IRQ to process; will be "
 292                                 "resetting xpc_hb_check_timeout\n");
 293
 294                         last_IRQ_count += xpc_identify_act_IRQ_sender();
 295                         if (last_IRQ_count < new_IRQ_count) {
 296                                 /* retry once to help avoid missing AMO */
 297                                 (void) xpc_identify_act_IRQ_sender();
 298                         }
 299                         last_IRQ_count = new_IRQ_count;
 300
 301                         xpc_hb_check_timeout = jiffies +
 302                                            (xpc_hb_check_interval * HZ);
 303                 }
 304
 305                 /* wait for IRQ or timeout */
 306                 (void) wait_event_interruptible(xpc_act_IRQ_wq,
 307                             (last_IRQ_count < atomic_read(&xpc_act_IRQ_rcvd) ||
 308                                         jiffies >= xpc_hb_check_timeout ||
 309                                                 (volatile int) xpc_exiting));
 310         }
 311
 312         dev_dbg(xpc_part, "heartbeat checker is exiting\n");
 313
 314
 315         /* mark this thread as having exited */
 316         complete(&xpc_hb_checker_exited);
 317         return 0;
 318 }
 319
 320
 321 /*
 322  * This thread will attempt to discover other partitions to activate
 323  * based on info provided by SAL. This new thread is short lived and
 324  * will exit once discovery is complete.
 325  */
 326 static int
 327 xpc_initiate_discovery(void *ignore)
 328 {
 329         daemonize(XPC_DISCOVERY_THREAD_NAME);
 330
 331         xpc_discovery();
 332
 333         dev_dbg(xpc_part, "discovery thread is exiting\n");
 334
 335         /* mark this thread as having exited */
 336         complete(&xpc_discovery_exited);
 337         return 0;
 338 }
 339
 340
 341 /*
 342  * Establish first contact with the remote partititon. This involves pulling
 343  * the XPC per partition variables from the remote partition and waiting for
 344  * the remote partition to pull ours.
 345  */
 346 static enum xpc_retval
 347 xpc_make_first_contact(struct xpc_partition *part)
 348 {
 349         enum xpc_retval ret;
 350
 351
 352         while ((ret = xpc_pull_remote_vars_part(part)) != xpcSuccess) {
 353                 if (ret != xpcRetry) {
 354                         XPC_DEACTIVATE_PARTITION(part, ret);
 355                         return ret;
 356                 }
 357
 358                 dev_dbg(xpc_chan, "waiting to make first contact with "
 359                         "partition %d\n", XPC_PARTID(part));
 360
 361                 /* wait a 1/4 of a second or so */
 362                 (void) msleep_interruptible(250);
 363
 364                 if (part->act_state == XPC_P_DEACTIVATING) {
 365                         return part->reason;
 366                 }
 367         }
 368
 369         return xpc_mark_partition_active(part);
 370 }
 371
 372
 373 /*
 374  * The first kthread assigned to a newly activated partition is the one
 375  * created by XPC HB with which it calls xpc_partition_up(). XPC hangs on to
 376  * that kthread until the partition is brought down, at which time that kthread
 377  * returns back to XPC HB. (The return of that kthread will signify to XPC HB
 378  * that XPC has dismantled all communication infrastructure for the associated
 379  * partition.) This kthread becomes the channel manager for that partition.
 380  *
 381  * Each active partition has a channel manager, who, besides connecting and
 382  * disconnecting channels, will ensure that each of the partition's connected
 383  * channels has the required number of assigned kthreads to get the work done.
 384  */
 385 static void
 386 xpc_channel_mgr(struct xpc_partition *part)
 387 {
 388         while (part->act_state != XPC_P_DEACTIVATING ||
 389                         atomic_read(&part->nchannels_active) > 0 ||
 390                                         !xpc_partition_disengaged(part)) {
 391
 392                 xpc_process_channel_activity(part);
 393
 394
 395                 /*
 396                  * Wait until we've been requested to activate kthreads or
 397                  * all of the channel's message queues have been torn down or
 398                  * a signal is pending.
 399                  *
 400                  * The channel_mgr_requests is set to 1 after being awakened,
 401                  * This is done to prevent the channel mgr from making one pass
 402                  * through the loop for each request, since he will
 403                  * be servicing all the requests in one pass. The reason it's
 404                  * set to 1 instead of 0 is so that other kthreads will know
 405                  * that the channel mgr is running and won't bother trying to
 406                  * wake him up.
 407                  */
 408                 atomic_dec(&part->channel_mgr_requests);
 409                 (void) wait_event_interruptible(part->channel_mgr_wq,
 410                                 (atomic_read(&part->channel_mgr_requests) > 0 ||
 411                                 (volatile u64) part->local_IPI_amo != 0 ||
 412                                 ((volatile u8) part->act_state ==
 413                                                         XPC_P_DEACTIVATING &&
 414                                 atomic_read(&part->nchannels_active) == 0 &&
 415                                 xpc_partition_disengaged(part))));
 416                 atomic_set(&part->channel_mgr_requests, 1);
 417
 418                 // >>> Does it need to wakeup periodically as well? In case we
 419                 // >>> miscalculated the #of kthreads to wakeup or create?
 420         }
 421 }
 422
 423
 424 /*
 425  * When XPC HB determines that a partition has come up, it will create a new
 426  * kthread and that kthread will call this function to attempt to set up the
 427  * basic infrastructure used for Cross Partition Communication with the newly
 428  * upped partition.
 429  *
 430  * The kthread that was created by XPC HB and which setup the XPC
 431  * infrastructure will remain assigned to the partition until the partition
 432  * goes down. At which time the kthread will teardown the XPC infrastructure
 433  * and then exit.
 434  *
 435  * XPC HB will put the remote partition's XPC per partition specific variables
 436  * physical address into xpc_partitions[partid].remote_vars_part_pa prior to
 437  * calling xpc_partition_up().
 438  */
 439 static void
 440 xpc_partition_up(struct xpc_partition *part)
 441 {
 442         DBUG_ON(part->channels != NULL);
 443
 444         dev_dbg(xpc_chan, "activating partition %d\n", XPC_PARTID(part));
 445
 446         if (xpc_setup_infrastructure(part) != xpcSuccess) {
 447                 return;
 448         }
 449
 450         /*
 451          * The kthread that XPC HB called us with will become the
 452          * channel manager for this partition. It will not return
 453          * back to XPC HB until the partition's XPC infrastructure
 454          * has been dismantled.
 455          */
 456
 457         (void) xpc_part_ref(part);      /* this will always succeed */
 458
 459         if (xpc_make_first_contact(part) == xpcSuccess) {
 460                 xpc_channel_mgr(part);
 461         }
 462
 463         xpc_part_deref(part);
 464
 465         xpc_teardown_infrastructure(part);
 466 }
 467
 468
 469 static int
 470 xpc_activating(void *__partid)
 471 {
 472         partid_t partid = (u64) __partid;
 473         struct xpc_partition *part = &xpc_partitions[partid];
 474         unsigned long irq_flags;
 475         struct sched_param param = { .sched_priority = MAX_RT_PRIO - 1 };
 476         int ret;
 477
 478
 479         DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
 480
 481         spin_lock_irqsave(&part->act_lock, irq_flags);
 482
 483         if (part->act_state == XPC_P_DEACTIVATING) {
 484                 part->act_state = XPC_P_INACTIVE;
 485                 spin_unlock_irqrestore(&part->act_lock, irq_flags);
 486                 part->remote_rp_pa = 0;
 487                 return 0;
 488         }
 489
 490         /* indicate the thread is activating */
 491         DBUG_ON(part->act_state != XPC_P_ACTIVATION_REQ);
 492         part->act_state = XPC_P_ACTIVATING;
 493
 494         XPC_SET_REASON(part, 0, 0);
 495         spin_unlock_irqrestore(&part->act_lock, irq_flags);
 496
 497         dev_dbg(xpc_part, "bringing partition %d up\n", partid);
 498
 499         daemonize("xpc%02d", partid);
 500
 501         /*
 502          * This thread needs to run at a realtime priority to prevent a
 503          * significant performance degradation.
 504          */
 505         ret = sched_setscheduler(current, SCHED_FIFO, &param);
 506         if (ret != 0) {
 507                 dev_warn(xpc_part, "unable to set pid %d to a realtime "
 508                         "priority, ret=%d\n", current->pid, ret);
 509         }
 510
 511         /* allow this thread and its children to run on any CPU */
 512         set_cpus_allowed(current, CPU_MASK_ALL);
 513
 514         /*
 515          * Register the remote partition's AMOs with SAL so it can handle
 516          * and cleanup errors within that address range should the remote
 517          * partition go down. We don't unregister this range because it is
 518          * difficult to tell when outstanding writes to the remote partition
 519          * are finished and thus when it is safe to unregister. This should
 520          * not result in wasted space in the SAL xp_addr_region table because
 521          * we should get the same page for remote_amos_page_pa after module
 522          * reloads and system reboots.
 523          */
 524         if (sn_register_xp_addr_region(part->remote_amos_page_pa,
 525                                                         PAGE_SIZE, 1) < 0) {
 526                 dev_warn(xpc_part, "xpc_partition_up(%d) failed to register "
 527                         "xp_addr region\n", partid);
 528
 529                 spin_lock_irqsave(&part->act_lock, irq_flags);
 530                 part->act_state = XPC_P_INACTIVE;
 531                 XPC_SET_REASON(part, xpcPhysAddrRegFailed, __LINE__);
 532                 spin_unlock_irqrestore(&part->act_lock, irq_flags);
 533                 part->remote_rp_pa = 0;
 534                 return 0;
 535         }
 536
 537         xpc_allow_hb(partid, xpc_vars);
 538         xpc_IPI_send_activated(part);
 539
 540
 541         /*
 542          * xpc_partition_up() holds this thread and marks this partition as
 543          * XPC_P_ACTIVE by calling xpc_hb_mark_active().
 544          */
 545         (void) xpc_partition_up(part);
 546
 547         xpc_disallow_hb(partid, xpc_vars);
 548         xpc_mark_partition_inactive(part);
 549
 550         if (part->reason == xpcReactivating) {
 551                 /* interrupting ourselves results in activating partition */
 552                 xpc_IPI_send_reactivate(part);
 553         }
 554
 555         return 0;
 556 }
 557
 558
 559 void
 560 xpc_activate_partition(struct xpc_partition *part)
 561 {
 562         partid_t partid = XPC_PARTID(part);
 563         unsigned long irq_flags;
 564         pid_t pid;
 565
 566
 567         spin_lock_irqsave(&part->act_lock, irq_flags);
 568
 569         DBUG_ON(part->act_state != XPC_P_INACTIVE);
 570
 571         part->act_state = XPC_P_ACTIVATION_REQ;
 572         XPC_SET_REASON(part, xpcCloneKThread, __LINE__);
 573
 574         spin_unlock_irqrestore(&part->act_lock, irq_flags);
 575
 576         pid = kernel_thread(xpc_activating, (void *) ((u64) partid), 0);
 577
 578         if (unlikely(pid <= 0)) {
 579                 spin_lock_irqsave(&part->act_lock, irq_flags);
 580                 part->act_state = XPC_P_INACTIVE;
 581                 XPC_SET_REASON(part, xpcCloneKThreadFailed, __LINE__);
 582                 spin_unlock_irqrestore(&part->act_lock, irq_flags);
 583         }
 584 }
 585
 586
 587 /*
 588  * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified
 589  * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more
 590  * than one partition, we use an AMO_t structure per partition to indicate
 591  * whether a partition has sent an IPI or not.  >>> If it has, then wake up the
 592  * associated kthread to handle it.
 593  *
 594  * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IPIs sent by XPC
 595  * running on other partitions.
 596  *
 597  * Noteworthy Arguments:
 598  *
 599  *      irq - Interrupt ReQuest number. NOT USED.
 600  *
 601  *      dev_id - partid of IPI's potential sender.
 602  */
 603 irqreturn_t
 604 xpc_notify_IRQ_handler(int irq, void *dev_id)
 605 {
 606         partid_t partid = (partid_t) (u64) dev_id;
 607         struct xpc_partition *part = &xpc_partitions[partid];
 608
 609
 610         DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
 611
 612         if (xpc_part_ref(part)) {
 613                 xpc_check_for_channel_activity(part);
 614
 615                 xpc_part_deref(part);
 616         }
 617         return IRQ_HANDLED;
 618 }
 619
 620
 621 /*
 622  * Check to see if xpc_notify_IRQ_handler() dropped any IPIs on the floor
 623  * because the write to their associated IPI amo completed after the IRQ/IPI
 624  * was received.
 625  */
 626 void
 627 xpc_dropped_IPI_check(struct xpc_partition *part)
 628 {
 629         if (xpc_part_ref(part)) {
 630                 xpc_check_for_channel_activity(part);
 631
 632                 part->dropped_IPI_timer.expires = jiffies +
 633                                                         XPC_P_DROPPED_IPI_WAIT;
 634                 add_timer(&part->dropped_IPI_timer);
 635                 xpc_part_deref(part);
 636         }
 637 }
 638
 639
 640 void
 641 xpc_activate_kthreads(struct xpc_channel *ch, int needed)
 642 {
 643         int idle = atomic_read(&ch->kthreads_idle);
 644         int assigned = atomic_read(&ch->kthreads_assigned);
 645         int wakeup;
 646
 647
 648         DBUG_ON(needed <= 0);
 649
 650         if (idle > 0) {
 651                 wakeup = (needed > idle) ? idle : needed;
 652                 needed -= wakeup;
 653
 654                 dev_dbg(xpc_chan, "wakeup %d idle kthreads, partid=%d, "
 655                         "channel=%d\n", wakeup, ch->partid, ch->number);
 656
 657                 /* only wakeup the requested number of kthreads */
 658                 wake_up_nr(&ch->idle_wq, wakeup);
 659         }
 660
 661         if (needed <= 0) {
 662                 return;
 663         }
 664
 665         if (needed + assigned > ch->kthreads_assigned_limit) {
 666                 needed = ch->kthreads_assigned_limit - assigned;
 667                 // >>>should never be less than 0
 668                 if (needed <= 0) {
 669                         return;
 670                 }
 671         }
 672
 673         dev_dbg(xpc_chan, "create %d new kthreads, partid=%d, channel=%d\n",
 674                 needed, ch->partid, ch->number);
 675
 676         xpc_create_kthreads(ch, needed, 0);
 677 }
 678
 679
 680 /*
 681  * This function is where XPC's kthreads wait for messages to deliver.
 682  */
 683 static void
 684 xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch)
 685 {
 686         do {
 687                 /* deliver messages to their intended recipients */
 688
 689                 while ((volatile s64) ch->w_local_GP.get <
 690                                 (volatile s64) ch->w_remote_GP.put &&
 691                                         !((volatile u32) ch->flags &
 692                                                 XPC_C_DISCONNECTING)) {
 693                         xpc_deliver_msg(ch);
 694                 }
 695
 696                 if (atomic_inc_return(&ch->kthreads_idle) >
 697                                                 ch->kthreads_idle_limit) {
 698                         /* too many idle kthreads on this channel */
 699                         atomic_dec(&ch->kthreads_idle);
 700                         break;
 701                 }
 702
 703                 dev_dbg(xpc_chan, "idle kthread calling "
 704                         "wait_event_interruptible_exclusive()\n");
 705
 706                 (void) wait_event_interruptible_exclusive(ch->idle_wq,
 707                                 ((volatile s64) ch->w_local_GP.get <
 708                                         (volatile s64) ch->w_remote_GP.put ||
 709                                 ((volatile u32) ch->flags &
 710                                                 XPC_C_DISCONNECTING)));
 711
 712                 atomic_dec(&ch->kthreads_idle);
 713
 714         } while (!((volatile u32) ch->flags & XPC_C_DISCONNECTING));
 715 }
 716
 717
 718 static int
 719 xpc_daemonize_kthread(void *args)
 720 {
 721         partid_t partid = XPC_UNPACK_ARG1(args);
 722         u16 ch_number = XPC_UNPACK_ARG2(args);
 723         struct xpc_partition *part = &xpc_partitions[partid];
 724         struct xpc_channel *ch;
 725         int n_needed;
 726         unsigned long irq_flags;
 727
 728
 729         daemonize("xpc%02dc%d", partid, ch_number);
 730
 731         dev_dbg(xpc_chan, "kthread starting, partid=%d, channel=%d\n",
 732                 partid, ch_number);
 733
 734         ch = &part->channels[ch_number];
 735
 736         if (!(ch->flags & XPC_C_DISCONNECTING)) {
 737
 738                 /* let registerer know that connection has been established */
 739
 740                 spin_lock_irqsave(&ch->lock, irq_flags);
 741                 if (!(ch->flags & XPC_C_CONNECTEDCALLOUT)) {
 742                         ch->flags |= XPC_C_CONNECTEDCALLOUT;
 743                         spin_unlock_irqrestore(&ch->lock, irq_flags);
 744
 745                         xpc_connected_callout(ch);
 746
 747                         spin_lock_irqsave(&ch->lock, irq_flags);
 748                         ch->flags |= XPC_C_CONNECTEDCALLOUT_MADE;
 749                         spin_unlock_irqrestore(&ch->lock, irq_flags);
 750
 751                         /*
 752                          * It is possible that while the callout was being
 753                          * made that the remote partition sent some messages.
 754                          * If that is the case, we may need to activate
 755                          * additional kthreads to help deliver them. We only
 756                          * need one less than total #of messages to deliver.
 757                          */
 758                         n_needed = ch->w_remote_GP.put - ch->w_local_GP.get - 1;
 759                         if (n_needed > 0 &&
 760                                         !(ch->flags & XPC_C_DISCONNECTING)) {
 761                                 xpc_activate_kthreads(ch, n_needed);
 762                         }
 763                 } else {
 764                         spin_unlock_irqrestore(&ch->lock, irq_flags);
 765                 }
 766
 767                 xpc_kthread_waitmsgs(part, ch);
 768         }
 769
 770         /* let registerer know that connection is disconnecting */
 771
 772         spin_lock_irqsave(&ch->lock, irq_flags);
 773         if ((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) &&
 774                         !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) {
 775                 ch->flags |= XPC_C_DISCONNECTINGCALLOUT;
 776                 spin_unlock_irqrestore(&ch->lock, irq_flags);
 777
 778                 xpc_disconnect_callout(ch, xpcDisconnecting);
 779
 780                 spin_lock_irqsave(&ch->lock, irq_flags);
 781                 ch->flags |= XPC_C_DISCONNECTINGCALLOUT_MADE;
 782         }
 783         spin_unlock_irqrestore(&ch->lock, irq_flags);
 784
 785         if (atomic_dec_return(&ch->kthreads_assigned) == 0) {
 786                 if (atomic_dec_return(&part->nchannels_engaged) == 0) {
 787                         xpc_mark_partition_disengaged(part);
 788                         xpc_IPI_send_disengage(part);
 789                 }
 790         }
 791
 792         xpc_msgqueue_deref(ch);
 793
 794         dev_dbg(xpc_chan, "kthread exiting, partid=%d, channel=%d\n",
 795                 partid, ch_number);
 796
 797         xpc_part_deref(part);
 798         return 0;
 799 }
 800
 801
 802 /*
 803  * For each partition that XPC has established communications with, there is
 804  * a minimum of one kernel thread assigned to perform any operation that
 805  * may potentially sleep or block (basically the callouts to the asynchronous
 806  * functions registered via xpc_connect()).
 807  *
 808  * Additional kthreads are created and destroyed by XPC as the workload
 809  * demands.
 810  *
 811  * A kthread is assigned to one of the active channels that exists for a given
 812  * partition.
 813  */
 814 void
 815 xpc_create_kthreads(struct xpc_channel *ch, int needed,
 816                         int ignore_disconnecting)
 817 {
 818         unsigned long irq_flags;
 819         pid_t pid;
 820         u64 args = XPC_PACK_ARGS(ch->partid, ch->number);
 821         struct xpc_partition *part = &xpc_partitions[ch->partid];
 822
 823
 824         while (needed-- > 0) {
 825
 826                 /*
 827                  * The following is done on behalf of the newly created
 828                  * kthread. That kthread is responsible for doing the
 829                  * counterpart to the following before it exits.
 830                  */
 831                 if (ignore_disconnecting) {
 832                         if (!atomic_inc_not_zero(&ch->kthreads_assigned)) {
 833                                 /* kthreads assigned had gone to zero */
 834                                 BUG_ON(!(ch->flags &
 835                                         XPC_C_DISCONNECTINGCALLOUT_MADE));
 836                                 break;
 837                         }
 838
 839                 } else if (ch->flags & XPC_C_DISCONNECTING) {
 840                         break;
 841
 842                 } else if (atomic_inc_return(&ch->kthreads_assigned) == 1) {
 843                         if (atomic_inc_return(&part->nchannels_engaged) == 1)
 844                                 xpc_mark_partition_engaged(part);
 845                 }
 846                 (void) xpc_part_ref(part);
 847                 xpc_msgqueue_ref(ch);
 848
 849                 pid = kernel_thread(xpc_daemonize_kthread, (void *) args, 0);
 850                 if (pid < 0) {
 851                         /* the fork failed */
 852
 853                         /*
 854                          * NOTE: if (ignore_disconnecting &&
 855                          * !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) is true,
 856                          * then we'll deadlock if all other kthreads assigned
 857                          * to this channel are blocked in the channel's
 858                          * registerer, because the only thing that will unblock
 859                          * them is the xpcDisconnecting callout that this
 860                          * failed kernel_thread would have made.
 861                          */
 862
 863                         if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
 864                             atomic_dec_return(&part->nchannels_engaged) == 0) {
 865                                 xpc_mark_partition_disengaged(part);
 866                                 xpc_IPI_send_disengage(part);
 867                         }
 868                         xpc_msgqueue_deref(ch);
 869                         xpc_part_deref(part);
 870
 871                         if (atomic_read(&ch->kthreads_assigned) <
 872                                                 ch->kthreads_idle_limit) {
 873                                 /*
 874                                  * Flag this as an error only if we have an
 875                                  * insufficient #of kthreads for the channel
 876                                  * to function.
 877                                  */
 878                                 spin_lock_irqsave(&ch->lock, irq_flags);
 879                                 XPC_DISCONNECT_CHANNEL(ch, xpcLackOfResources,
 880                                                                 &irq_flags);
 881                                 spin_unlock_irqrestore(&ch->lock, irq_flags);
 882                         }
 883                         break;
 884                 }
 885
 886                 ch->kthreads_created++; // >>> temporary debug only!!!
 887         }
 888 }
 889
 890
 891 void
 892 xpc_disconnect_wait(int ch_number)
 893 {
 894         unsigned long irq_flags;
 895         partid_t partid;
 896         struct xpc_partition *part;
 897         struct xpc_channel *ch;
 898         int wakeup_channel_mgr;
 899
 900
 901         /* now wait for all callouts to the caller's function to cease */
 902         for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
 903                 part = &xpc_partitions[partid];
 904
 905                 if (!xpc_part_ref(part)) {
 906                         continue;
 907                 }
 908
 909                 ch = &part->channels[ch_number];
 910
 911                 if (!(ch->flags & XPC_C_WDISCONNECT)) {
 912                         xpc_part_deref(part);
 913                         continue;
 914                 }
 915
 916                 wait_for_completion(&ch->wdisconnect_wait);
 917
 918                 spin_lock_irqsave(&ch->lock, irq_flags);
 919                 DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
 920                 wakeup_channel_mgr = 0;
 921
 922                 if (ch->delayed_IPI_flags) {
 923                         if (part->act_state != XPC_P_DEACTIVATING) {
 924                                 spin_lock(&part->IPI_lock);
 925                                 XPC_SET_IPI_FLAGS(part->local_IPI_amo,
 926                                         ch->number, ch->delayed_IPI_flags);
 927                                 spin_unlock(&part->IPI_lock);
 928                                 wakeup_channel_mgr = 1;
 929                         }
 930                         ch->delayed_IPI_flags = 0;
 931                 }
 932
 933                 ch->flags &= ~XPC_C_WDISCONNECT;
 934                 spin_unlock_irqrestore(&ch->lock, irq_flags);
 935
 936                 if (wakeup_channel_mgr) {
 937                         xpc_wakeup_channel_mgr(part);
 938                 }
 939
 940                 xpc_part_deref(part);
 941         }
 942 }
 943
 944
 945 static void
 946 xpc_do_exit(enum xpc_retval reason)
 947 {
 948         partid_t partid;
 949         int active_part_count, printed_waiting_msg = 0;
 950         struct xpc_partition *part;
 951         unsigned long printmsg_time, disengage_request_timeout = 0;
 952
 953
 954         /* a 'rmmod XPC' and a 'reboot' cannot both end up here together */
 955         DBUG_ON(xpc_exiting == 1);
 956
 957         /*
 958          * Let the heartbeat checker thread and the discovery thread
 959          * (if one is running) know that they should exit. Also wake up
 960          * the heartbeat checker thread in case it's sleeping.
 961          */
 962         xpc_exiting = 1;
 963         wake_up_interruptible(&xpc_act_IRQ_wq);
 964
 965         /* ignore all incoming interrupts */
 966         free_irq(SGI_XPC_ACTIVATE, NULL);
 967
 968         /* wait for the discovery thread to exit */
 969         wait_for_completion(&xpc_discovery_exited);
 970
 971         /* wait for the heartbeat checker thread to exit */
 972         wait_for_completion(&xpc_hb_checker_exited);
 973
 974
 975         /* sleep for a 1/3 of a second or so */
 976         (void) msleep_interruptible(300);
 977
 978
 979         /* wait for all partitions to become inactive */
 980
 981         printmsg_time = jiffies + (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
 982         xpc_disengage_request_timedout = 0;
 983
 984         do {
 985                 active_part_count = 0;
 986
 987                 for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
 988                         part = &xpc_partitions[partid];
 989
 990                         if (xpc_partition_disengaged(part) &&
 991                                         part->act_state == XPC_P_INACTIVE) {
 992                                 continue;
 993                         }
 994
 995                         active_part_count++;
 996
 997                         XPC_DEACTIVATE_PARTITION(part, reason);
 998
 999                         if (part->disengage_request_timeout >
1000                                                 disengage_request_timeout) {
1001                                 disengage_request_timeout =
1002                                                 part->disengage_request_timeout;
1003                         }
1004                 }
1005
1006                 if (xpc_partition_engaged(-1UL)) {
1007                         if (time_after(jiffies, printmsg_time)) {
1008                                 dev_info(xpc_part, "waiting for remote "
1009                                         "partitions to disengage, timeout in "
1010                                         "%ld seconds\n",
1011                                         (disengage_request_timeout - jiffies)
1012                                                                         / HZ);
1013                                 printmsg_time = jiffies +
1014                                         (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
1015                                 printed_waiting_msg = 1;
1016                         }
1017
1018                 } else if (active_part_count > 0) {
1019                         if (printed_waiting_msg) {
1020                                 dev_info(xpc_part, "waiting for local partition"
1021                                         " to disengage\n");
1022                                 printed_waiting_msg = 0;
1023                         }
1024
1025                 } else {
1026                         if (!xpc_disengage_request_timedout) {
1027                                 dev_info(xpc_part, "all partitions have "
1028                                         "disengaged\n");
1029                         }
1030                         break;
1031                 }
1032
1033                 /* sleep for a 1/3 of a second or so */
1034                 (void) msleep_interruptible(300);
1035
1036         } while (1);
1037
1038         DBUG_ON(xpc_partition_engaged(-1UL));
1039
1040
1041         /* indicate to others that our reserved page is uninitialized */
1042         xpc_rsvd_page->vars_pa = 0;
1043
1044         /* now it's time to eliminate our heartbeat */
1045         del_timer_sync(&xpc_hb_timer);
1046         DBUG_ON(xpc_vars->heartbeating_to_mask != 0);
1047
1048         if (reason == xpcUnloading) {
1049                 /* take ourselves off of the reboot_notifier_list */
1050                 (void) unregister_reboot_notifier(&xpc_reboot_notifier);
1051
1052                 /* take ourselves off of the die_notifier list */
1053                 (void) unregister_die_notifier(&xpc_die_notifier);
1054         }
1055
1056         /* close down protections for IPI operations */
1057         xpc_restrict_IPI_ops();
1058
1059
1060         /* clear the interface to XPC's functions */
1061         xpc_clear_interface();
1062
1063         if (xpc_sysctl) {
1064                 unregister_sysctl_table(xpc_sysctl);
1065         }
1066
1067         kfree(xpc_remote_copy_buffer_base);
1068 }
1069
1070
1071 /*
1072  * This function is called when the system is being rebooted.
1073  */
1074 static int
1075 xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused)
1076 {
1077         enum xpc_retval reason;
1078
1079
1080         switch (event) {
1081         case SYS_RESTART:
1082                 reason = xpcSystemReboot;
1083                 break;
1084         case SYS_HALT:
1085                 reason = xpcSystemHalt;
1086                 break;
1087         case SYS_POWER_OFF:
1088                 reason = xpcSystemPoweroff;
1089                 break;
1090         default:
1091                 reason = xpcSystemGoingDown;
1092         }
1093
1094         xpc_do_exit(reason);
1095         return NOTIFY_DONE;
1096 }
1097
1098
1099 /*
1100  * Notify other partitions to disengage from all references to our memory.
1101  */
1102 static void
1103 xpc_die_disengage(void)
1104 {
1105         struct xpc_partition *part;
1106         partid_t partid;
1107         unsigned long engaged;
1108         long time, printmsg_time, disengage_request_timeout;
1109
1110
1111         /* keep xpc_hb_checker thread from doing anything (just in case) */
1112         xpc_exiting = 1;
1113
1114         xpc_vars->heartbeating_to_mask = 0;  /* indicate we're deactivated */
1115
1116         for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
1117                 part = &xpc_partitions[partid];
1118
1119                 if (!XPC_SUPPORTS_DISENGAGE_REQUEST(part->
1120                                                         remote_vars_version)) {
1121
1122                         /* just in case it was left set by an earlier XPC */
1123                         xpc_clear_partition_engaged(1UL << partid);
1124                         continue;
1125                 }
1126
1127                 if (xpc_partition_engaged(1UL << partid) ||
1128                                         part->act_state != XPC_P_INACTIVE) {
1129                         xpc_request_partition_disengage(part);
1130                         xpc_mark_partition_disengaged(part);
1131                         xpc_IPI_send_disengage(part);
1132                 }
1133         }
1134
1135         time = rtc_time();
1136         printmsg_time = time +
1137                 (XPC_DISENGAGE_PRINTMSG_INTERVAL * sn_rtc_cycles_per_second);
1138         disengage_request_timeout = time +
1139                 (xpc_disengage_request_timelimit * sn_rtc_cycles_per_second);
1140
1141         /* wait for all other partitions to disengage from us */
1142
1143         while (1) {
1144                 engaged = xpc_partition_engaged(-1UL);
1145                 if (!engaged) {
1146                         dev_info(xpc_part, "all partitions have disengaged\n");
1147                         break;
1148                 }
1149
1150                 time = rtc_time();
1151                 if (time >= disengage_request_timeout) {
1152                         for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
1153                                 if (engaged & (1UL << partid)) {
1154                                         dev_info(xpc_part, "disengage from "
1155                                                 "remote partition %d timed "
1156                                                 "out\n", partid);
1157                                 }
1158                         }
1159                         break;
1160                 }
1161
1162                 if (time >= printmsg_time) {
1163                         dev_info(xpc_part, "waiting for remote partitions to "
1164                                 "disengage, timeout in %ld seconds\n",
1165                                 (disengage_request_timeout - time) /
1166                                                 sn_rtc_cycles_per_second);
1167                         printmsg_time = time +
1168                                         (XPC_DISENGAGE_PRINTMSG_INTERVAL *
1169                                                 sn_rtc_cycles_per_second);
1170                 }
1171         }
1172 }
1173
1174
1175 /*
1176  * This function is called when the system is being restarted or halted due
1177  * to some sort of system failure. If this is the case we need to notify the
1178  * other partitions to disengage from all references to our memory.
1179  * This function can also be called when our heartbeater could be offlined
1180  * for a time. In this case we need to notify other partitions to not worry
1181  * about the lack of a heartbeat.
1182  */
1183 static int
1184 xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
1185 {
1186         switch (event) {
1187         case DIE_MACHINE_RESTART:
1188         case DIE_MACHINE_HALT:
1189                 xpc_die_disengage();
1190                 break;
1191
1192         case DIE_KDEBUG_ENTER:
1193                 /* Should lack of heartbeat be ignored by other partitions? */
1194                 if (!xpc_kdebug_ignore) {
1195                         break;
1196                 }
1197                 /* fall through */
1198         case DIE_MCA_MONARCH_ENTER:
1199         case DIE_INIT_MONARCH_ENTER:
1200                 xpc_vars->heartbeat++;
1201                 xpc_vars->heartbeat_offline = 1;
1202                 break;
1203
1204         case DIE_KDEBUG_LEAVE:
1205                 /* Is lack of heartbeat being ignored by other partitions? */
1206                 if (!xpc_kdebug_ignore) {
1207                         break;
1208                 }
1209                 /* fall through */
1210         case DIE_MCA_MONARCH_LEAVE:
1211         case DIE_INIT_MONARCH_LEAVE:
1212                 xpc_vars->heartbeat++;
1213                 xpc_vars->heartbeat_offline = 0;
1214                 break;
1215         }
1216
1217         return NOTIFY_DONE;
1218 }
1219
1220
1221 int __init
1222 xpc_init(void)
1223 {
1224         int ret;
1225         partid_t partid;
1226         struct xpc_partition *part;
1227         pid_t pid;
1228         size_t buf_size;
1229
1230
1231         if (!ia64_platform_is("sn2")) {
1232                 return -ENODEV;
1233         }
1234
1235
1236         buf_size = max(XPC_RP_VARS_SIZE,
1237                                 XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES);
1238         xpc_remote_copy_buffer = xpc_kmalloc_cacheline_aligned(buf_size,
1239                                      GFP_KERNEL, &xpc_remote_copy_buffer_base);
1240         if (xpc_remote_copy_buffer == NULL)
1241                 return -ENOMEM;
1242
1243         snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part");
1244         snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan");
1245
1246         xpc_sysctl = register_sysctl_table(xpc_sys_dir);
1247
1248         /*
1249          * The first few fields of each entry of xpc_partitions[] need to
1250          * be initialized now so that calls to xpc_connect() and
1251          * xpc_disconnect() can be made prior to the activation of any remote
1252          * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE
1253          * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING
1254          * PARTITION HAS BEEN ACTIVATED.
1255          */
1256         for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
1257                 part = &xpc_partitions[partid];
1258
1259                 DBUG_ON((u64) part != L1_CACHE_ALIGN((u64) part));
1260
1261                 part->act_IRQ_rcvd = 0;
1262                 spin_lock_init(&part->act_lock);
1263                 part->act_state = XPC_P_INACTIVE;
1264                 XPC_SET_REASON(part, 0, 0);
1265
1266                 init_timer(&part->disengage_request_timer);
1267                 part->disengage_request_timer.function =
1268                                 xpc_timeout_partition_disengage_request;
1269                 part->disengage_request_timer.data = (unsigned long) part;
1270
1271                 part->setup_state = XPC_P_UNSET;
1272                 init_waitqueue_head(&part->teardown_wq);
1273                 atomic_set(&part->references, 0);
1274         }
1275
1276         /*
1277          * Open up protections for IPI operations (and AMO operations on
1278          * Shub 1.1 systems).
1279          */
1280         xpc_allow_IPI_ops();
1281
1282         /*
1283          * Interrupts being processed will increment this atomic variable and
1284          * awaken the heartbeat thread which will process the interrupts.
1285          */
1286         atomic_set(&xpc_act_IRQ_rcvd, 0);
1287
1288         /*
1289          * This is safe to do before the xpc_hb_checker thread has started
1290          * because the handler releases a wait queue.  If an interrupt is
1291          * received before the thread is waiting, it will not go to sleep,
1292          * but rather immediately process the interrupt.
1293          */
1294         ret = request_irq(SGI_XPC_ACTIVATE, xpc_act_IRQ_handler, 0,
1295                                                         "xpc hb", NULL);
1296         if (ret != 0) {
1297                 dev_err(xpc_part, "can't register ACTIVATE IRQ handler, "
1298                         "errno=%d\n", -ret);
1299
1300                 xpc_restrict_IPI_ops();
1301
1302                 if (xpc_sysctl) {
1303                         unregister_sysctl_table(xpc_sysctl);
1304                 }
1305
1306                 kfree(xpc_remote_copy_buffer_base);
1307                 return -EBUSY;
1308         }
1309
1310         /*
1311          * Fill the partition reserved page with the information needed by
1312          * other partitions to discover we are alive and establish initial
1313          * communications.
1314          */
1315         xpc_rsvd_page = xpc_rsvd_page_init();
1316         if (xpc_rsvd_page == NULL) {
1317                 dev_err(xpc_part, "could not setup our reserved page\n");
1318
1319                 free_irq(SGI_XPC_ACTIVATE, NULL);
1320                 xpc_restrict_IPI_ops();
1321
1322                 if (xpc_sysctl) {
1323                         unregister_sysctl_table(xpc_sysctl);
1324                 }
1325
1326                 kfree(xpc_remote_copy_buffer_base);
1327                 return -EBUSY;
1328         }
1329
1330
1331         /* add ourselves to the reboot_notifier_list */
1332         ret = register_reboot_notifier(&xpc_reboot_notifier);
1333         if (ret != 0) {
1334                 dev_warn(xpc_part, "can't register reboot notifier\n");
1335         }
1336
1337         /* add ourselves to the die_notifier list */
1338         ret = register_die_notifier(&xpc_die_notifier);
1339         if (ret != 0) {
1340                 dev_warn(xpc_part, "can't register die notifier\n");
1341         }
1342
1343         init_timer(&xpc_hb_timer);
1344         xpc_hb_timer.function = xpc_hb_beater;
1345
1346         /*
1347          * The real work-horse behind xpc.  This processes incoming
1348          * interrupts and monitors remote heartbeats.
1349          */
1350         pid = kernel_thread(xpc_hb_checker, NULL, 0);
1351         if (pid < 0) {
1352                 dev_err(xpc_part, "failed while forking hb check thread\n");
1353
1354                 /* indicate to others that our reserved page is uninitialized */
1355                 xpc_rsvd_page->vars_pa = 0;
1356
1357                 /* take ourselves off of the reboot_notifier_list */
1358                 (void) unregister_reboot_notifier(&xpc_reboot_notifier);
1359
1360                 /* take ourselves off of the die_notifier list */
1361                 (void) unregister_die_notifier(&xpc_die_notifier);
1362
1363                 del_timer_sync(&xpc_hb_timer);
1364                 free_irq(SGI_XPC_ACTIVATE, NULL);
1365                 xpc_restrict_IPI_ops();
1366
1367                 if (xpc_sysctl) {
1368                         unregister_sysctl_table(xpc_sysctl);
1369                 }
1370
1371                 kfree(xpc_remote_copy_buffer_base);
1372                 return -EBUSY;
1373         }
1374
1375
1376         /*
1377          * Startup a thread that will attempt to discover other partitions to
1378          * activate based on info provided by SAL. This new thread is short
1379          * lived and will exit once discovery is complete.
1380          */
1381         pid = kernel_thread(xpc_initiate_discovery, NULL, 0);
1382         if (pid < 0) {
1383                 dev_err(xpc_part, "failed while forking discovery thread\n");
1384
1385                 /* mark this new thread as a non-starter */
1386                 complete(&xpc_discovery_exited);
1387
1388                 xpc_do_exit(xpcUnloading);
1389                 return -EBUSY;
1390         }
1391
1392
1393         /* set the interface to point at XPC's functions */
1394         xpc_set_interface(xpc_initiate_connect, xpc_initiate_disconnect,
1395                           xpc_initiate_allocate, xpc_initiate_send,
1396                           xpc_initiate_send_notify, xpc_initiate_received,
1397                           xpc_initiate_partid_to_nasids);
1398
1399         return 0;
1400 }
1401 module_init(xpc_init);
1402
1403
1404 void __exit
1405 xpc_exit(void)
1406 {
1407         xpc_do_exit(xpcUnloading);
1408 }
1409 module_exit(xpc_exit);
1410
1411
1412 MODULE_AUTHOR("Silicon Graphics, Inc.");
1413 MODULE_DESCRIPTION("Cross Partition Communication (XPC) support");
1414 MODULE_LICENSE("GPL");
1415
1416 module_param(xpc_hb_interval, int, 0);
1417 MODULE_PARM_DESC(xpc_hb_interval, "Number of seconds between "
1418                 "heartbeat increments.");
1419
1420 module_param(xpc_hb_check_interval, int, 0);
1421 MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between "
1422                 "heartbeat checks.");
1423
1424 module_param(xpc_disengage_request_timelimit, int, 0);
1425 MODULE_PARM_DESC(xpc_disengage_request_timelimit, "Number of seconds to wait "
1426                 "for disengage request to complete.");
1427
1428 module_param(xpc_kdebug_ignore, int, 0);
1429 MODULE_PARM_DESC(xpc_kdebug_ignore, "Should lack of heartbeat be ignored by "
1430                 "other partitions when dropping into kdebug.");
1431