2 * Simulated SCSI driver.
4 * Copyright (C) 1999, 2001-2003 Hewlett-Packard Co
5 * David Mosberger-Tang <davidm@hpl.hp.com>
6 * Stephane Eranian <eranian@hpl.hp.com>
8 * 02/01/15 David Mosberger Updated for v2.5.1
9 * 99/12/18 David Mosberger Added support for READ10/WRITE10 needed by linux v2.3.33
11 #include <linux/blkdev.h>
12 #include <linux/init.h>
13 #include <linux/interrupt.h>
14 #include <linux/kernel.h>
15 #include <linux/timer.h>
18 #include <scsi/scsi.h>
19 #include <scsi/scsi_cmnd.h>
20 #include <scsi/scsi_device.h>
21 #include <scsi/scsi_host.h>
23 #define DEBUG_SIMSCSI 0
25 #define SIMSCSI_REQ_QUEUE_LEN 64
26 #define DEFAULT_SIMSCSI_ROOT "/var/ski-disks/sd"
28 /* Simulator system calls: */
34 #define SSC_GET_COMPLETION 54
35 #define SSC_WAIT_COMPLETION 55
37 #define SSC_WRITE_ACCESS 2
38 #define SSC_READ_ACCESS 1
42 # define DBG simscsi_debug
47 static struct Scsi_Host *host;
49 static void simscsi_interrupt (unsigned long val);
50 static DECLARE_TASKLET(simscsi_tasklet, simscsi_interrupt, 0);
62 extern long ia64_ssc (long arg0, long arg1, long arg2, long arg3, int nr);
64 static int desc[16] = {
65 -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
68 static struct queue_entry {
70 } queue[SIMSCSI_REQ_QUEUE_LEN];
73 static atomic_t num_reqs = ATOMIC_INIT(0);
75 /* base name for default disks */
76 static char *simscsi_root = DEFAULT_SIMSCSI_ROOT;
78 #define MAX_ROOT_LEN 128
81 * used to setup a new base for disk images
82 * to use /foo/bar/disk[a-z] as disk images
83 * you have to specify simscsi=/foo/bar/disk on the command line
86 simscsi_setup (char *s)
88 /* XXX Fix me we may need to strcpy() ? */
89 if (strlen(s) > MAX_ROOT_LEN) {
90 printk(KERN_ERR "simscsi_setup: prefix too long---using default %s\n",
97 __setup("simscsi=", simscsi_setup);
100 simscsi_interrupt (unsigned long val)
102 struct scsi_cmnd *sc;
104 while ((sc = queue[rd].sc) != 0) {
105 atomic_dec(&num_reqs);
108 printk("simscsi_interrupt: done with %ld\n", sc->serial_number);
109 (*sc->scsi_done)(sc);
110 rd = (rd + 1) % SIMSCSI_REQ_QUEUE_LEN;
115 simscsi_biosparam (struct scsi_device *sdev, struct block_device *n,
116 sector_t capacity, int ip[])
118 ip[0] = 64; /* heads */
119 ip[1] = 32; /* sectors */
120 ip[2] = capacity >> 11; /* cylinders */
125 simscsi_readwrite (struct scsi_cmnd *sc, int mode, unsigned long offset, unsigned long len)
127 struct disk_stat stat;
130 req.addr = __pa(sc->request_buffer);
131 req.len = len; /* # of bytes to transfer */
133 if (sc->request_bufflen < req.len)
136 stat.fd = desc[sc->device->id];
138 printk("simscsi_%s @ %lx (off %lx)\n",
139 mode == SSC_READ ? "read":"write", req.addr, offset);
140 ia64_ssc(stat.fd, 1, __pa(&req), offset, mode);
141 ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION);
143 if (stat.count == req.len) {
146 sc->result = DID_ERROR << 16;
151 simscsi_sg_readwrite (struct scsi_cmnd *sc, int mode, unsigned long offset)
153 int list_len = sc->use_sg;
154 struct scatterlist *sl = (struct scatterlist *)sc->buffer;
155 struct disk_stat stat;
158 stat.fd = desc[sc->device->id];
161 req.addr = __pa(page_address(sl->page) + sl->offset);
162 req.len = sl->length;
164 printk("simscsi_sg_%s @ %lx (off %lx) use_sg=%d len=%d\n",
165 mode == SSC_READ ? "read":"write", req.addr, offset,
166 list_len, sl->length);
167 ia64_ssc(stat.fd, 1, __pa(&req), offset, mode);
168 ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION);
170 /* should not happen in our case */
171 if (stat.count != req.len) {
172 sc->result = DID_ERROR << 16;
175 offset += sl->length;
183 * function handling both READ_6/WRITE_6 (non-scatter/gather mode)
185 * Added 02/26/99 S.Eranian
188 simscsi_readwrite6 (struct scsi_cmnd *sc, int mode)
190 unsigned long offset;
192 offset = (((sc->cmnd[1] & 0x1f) << 16) | (sc->cmnd[2] << 8) | sc->cmnd[3])*512;
194 simscsi_sg_readwrite(sc, mode, offset);
196 simscsi_readwrite(sc, mode, offset, sc->cmnd[4]*512);
200 simscsi_get_disk_size (int fd)
202 struct disk_stat stat;
203 size_t bit, sectors = 0;
208 * This is a bit kludgey: the simulator doesn't provide a
209 * direct way of determining the disk size, so we do a binary
210 * search, assuming a maximum disk size of 128GB.
212 for (bit = (128UL << 30)/512; bit != 0; bit >>= 1) {
213 req.addr = __pa(&buf);
214 req.len = sizeof(buf);
215 ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ);
217 ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION);
218 if (stat.count == sizeof(buf))
221 return sectors - 1; /* return last valid sector number */
225 simscsi_readwrite10 (struct scsi_cmnd *sc, int mode)
227 unsigned long offset;
229 offset = (((unsigned long)sc->cmnd[2] << 24)
230 | ((unsigned long)sc->cmnd[3] << 16)
231 | ((unsigned long)sc->cmnd[4] << 8)
232 | ((unsigned long)sc->cmnd[5] << 0))*512UL;
234 simscsi_sg_readwrite(sc, mode, offset);
236 simscsi_readwrite(sc, mode, offset, ((sc->cmnd[7] << 8) | sc->cmnd[8])*512);
239 static void simscsi_fillresult(struct scsi_cmnd *sc, char *buf, unsigned len)
242 int scatterlen = sc->use_sg;
243 struct scatterlist *slp;
246 memcpy(sc->request_buffer, buf, len);
247 else for (slp = (struct scatterlist *)sc->buffer; scatterlen-- > 0 && len > 0; slp++) {
248 unsigned thislen = min(len, slp->length);
250 memcpy(page_address(slp->page) + slp->offset, buf, thislen);
257 simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
259 unsigned int target_id = sc->device->id;
260 char fname[MAX_ROOT_LEN+16];
265 register long sp asm ("sp");
268 printk("simscsi_queuecommand: target=%d,cmnd=%u,sc=%lu,sp=%lx,done=%p\n",
269 target_id, sc->cmnd[0], sc->serial_number, sp, done);
272 sc->result = DID_BAD_TARGET << 16;
273 sc->scsi_done = done;
274 if (target_id <= 15 && sc->device->lun == 0) {
275 switch (sc->cmnd[0]) {
277 if (sc->request_bufflen < 35) {
280 sprintf (fname, "%s%c", simscsi_root, 'a' + target_id);
281 desc[target_id] = ia64_ssc(__pa(fname), SSC_READ_ACCESS|SSC_WRITE_ACCESS,
283 if (desc[target_id] < 0) {
284 /* disk doesn't exist... */
288 buf[0] = 0; /* magnetic disk */
289 buf[1] = 0; /* not a removable medium */
290 buf[2] = 2; /* SCSI-2 compliant device */
291 buf[3] = 2; /* SCSI-2 response data format */
292 buf[4] = 31; /* additional length (bytes) */
293 buf[5] = 0; /* reserved */
294 buf[6] = 0; /* reserved */
295 buf[7] = 0; /* various flags */
296 memcpy(buf + 8, "HP SIMULATED DISK 0.00", 28);
297 simscsi_fillresult(sc, buf, 36);
301 case TEST_UNIT_READY:
306 if (desc[target_id] < 0 )
308 simscsi_readwrite6(sc, SSC_READ);
312 if (desc[target_id] < 0 )
314 simscsi_readwrite10(sc, SSC_READ);
318 if (desc[target_id] < 0)
320 simscsi_readwrite6(sc, SSC_WRITE);
324 if (desc[target_id] < 0)
326 simscsi_readwrite10(sc, SSC_WRITE);
330 if (desc[target_id] < 0 || sc->request_bufflen < 8) {
334 disk_size = simscsi_get_disk_size(desc[target_id]);
336 buf[0] = (disk_size >> 24) & 0xff;
337 buf[1] = (disk_size >> 16) & 0xff;
338 buf[2] = (disk_size >> 8) & 0xff;
339 buf[3] = (disk_size >> 0) & 0xff;
340 /* set block size of 512 bytes: */
345 simscsi_fillresult(sc, buf, 8);
351 /* sd.c uses this to determine whether disk does write-caching. */
352 simscsi_fillresult(sc, (char *)empty_zero_page, sc->request_bufflen);
357 printk(KERN_ERR "START_STOP\n");
361 panic("simscsi: unknown SCSI command %u\n", sc->cmnd[0]);
364 if (sc->result == DID_BAD_TARGET) {
365 sc->result |= DRIVER_SENSE << 24;
366 sc->sense_buffer[0] = 0x70;
367 sc->sense_buffer[2] = 0x00;
369 if (atomic_read(&num_reqs) >= SIMSCSI_REQ_QUEUE_LEN) {
370 panic("Attempt to queue command while command is pending!!");
372 atomic_inc(&num_reqs);
374 wr = (wr + 1) % SIMSCSI_REQ_QUEUE_LEN;
376 tasklet_schedule(&simscsi_tasklet);
381 simscsi_host_reset (struct scsi_cmnd *sc)
383 printk(KERN_ERR "simscsi_host_reset: not implemented\n");
387 static struct scsi_host_template driver_template = {
388 .name = "simulated SCSI host adapter",
389 .proc_name = "simscsi",
390 .queuecommand = simscsi_queuecommand,
391 .eh_host_reset_handler = simscsi_host_reset,
392 .bios_param = simscsi_biosparam,
393 .can_queue = SIMSCSI_REQ_QUEUE_LEN,
395 .sg_tablesize = SG_ALL,
397 .cmd_per_lun = SIMSCSI_REQ_QUEUE_LEN,
398 .use_clustering = DISABLE_CLUSTERING,
406 host = scsi_host_alloc(&driver_template, 0);
410 error = scsi_add_host(host, NULL);
412 scsi_scan_host(host);
419 scsi_remove_host(host);
423 module_init(simscsi_init);
424 module_exit(simscsi_exit);