arch/blackfin/mach-bf548/boards/ezkit.c

   1 /*
   2  * File:         arch/blackfin/mach-bf548/boards/ezkit.c
   3  * Based on:     arch/blackfin/mach-bf537/boards/ezkit.c
   4  * Author:       Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Created:
   7  * Description:
   8  *
   9  * Modified:
  10  *               Copyright 2005 National ICT Australia (NICTA)
  11  *               Copyright 2004-2007 Analog Devices Inc.
  12  *
  13  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  14  *
  15  * This program is free software; you can redistribute it and/or modify
  16  * it under the terms of the GNU General Public License as published by
  17  * the Free Software Foundation; either version 2 of the License, or
  18  * (at your option) any later version.
  19  *
  20  * This program is distributed in the hope that it will be useful,
  21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  * GNU General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License
  26  * along with this program; if not, see the file COPYING, or write
  27  * to the Free Software Foundation, Inc.,
  28  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  29  */
  30
  31 #include <linux/device.h>
  32 #include <linux/platform_device.h>
  33 #include <linux/mtd/mtd.h>
  34 #include <linux/mtd/partitions.h>
  35 #include <linux/mtd/physmap.h>
  36 #include <linux/spi/spi.h>
  37 #include <linux/spi/flash.h>
  38 #include <linux/irq.h>
  39 #include <linux/i2c.h>
  40 #include <linux/interrupt.h>
  41 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
  42 #include <linux/usb/musb.h>
  43 #endif
  44 #include <asm/bfin5xx_spi.h>
  45 #include <asm/cplb.h>
  46 #include <asm/dma.h>
  47 #include <asm/gpio.h>
  48 #include <asm/nand.h>
  49 #include <asm/dpmc.h>
  50 #include <asm/portmux.h>
  51 #include <asm/mach/bf54x_keys.h>
  52 #include <linux/input.h>
  53 #include <linux/spi/ad7877.h>
  54
  55 /*
  56  * Name the Board for the /proc/cpuinfo
  57  */
  58 const char bfin_board_name[] = "ADSP-BF548-EZKIT";
  59
  60 /*
  61  *  Driver needs to know address, irq and flag pin.
  62  */
  63
  64 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
  65
  66 #include <asm/mach/bf54x-lq043.h>
  67
  68 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
  69         .width =        480,
  70         .height =       272,
  71         .xres =         {480, 480, 480},
  72         .yres =         {272, 272, 272},
  73         .bpp =          {24, 24, 24},
  74         .disp =         GPIO_PE3,
  75 };
  76
  77 static struct resource bf54x_lq043_resources[] = {
  78         {
  79                 .start = IRQ_EPPI0_ERR,
  80                 .end = IRQ_EPPI0_ERR,
  81                 .flags = IORESOURCE_IRQ,
  82         },
  83 };
  84
  85 static struct platform_device bf54x_lq043_device = {
  86         .name           = "bf54x-lq043",
  87         .id             = -1,
  88         .num_resources  = ARRAY_SIZE(bf54x_lq043_resources),
  89         .resource       = bf54x_lq043_resources,
  90         .dev            = {
  91                 .platform_data = &bf54x_lq043_data,
  92         },
  93 };
  94 #endif
  95
  96 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
  97 static const unsigned int bf548_keymap[] = {
  98         KEYVAL(0, 0, KEY_ENTER),
  99         KEYVAL(0, 1, KEY_HELP),
 100         KEYVAL(0, 2, KEY_0),
 101         KEYVAL(0, 3, KEY_BACKSPACE),
 102         KEYVAL(1, 0, KEY_TAB),
 103         KEYVAL(1, 1, KEY_9),
 104         KEYVAL(1, 2, KEY_8),
 105         KEYVAL(1, 3, KEY_7),
 106         KEYVAL(2, 0, KEY_DOWN),
 107         KEYVAL(2, 1, KEY_6),
 108         KEYVAL(2, 2, KEY_5),
 109         KEYVAL(2, 3, KEY_4),
 110         KEYVAL(3, 0, KEY_UP),
 111         KEYVAL(3, 1, KEY_3),
 112         KEYVAL(3, 2, KEY_2),
 113         KEYVAL(3, 3, KEY_1),
 114 };
 115
 116 static struct bfin_kpad_platform_data bf54x_kpad_data = {
 117         .rows                   = 4,
 118         .cols                   = 4,
 119         .keymap                 = bf548_keymap,
 120         .keymapsize             = ARRAY_SIZE(bf548_keymap),
 121         .repeat                 = 0,
 122         .debounce_time          = 5000, /* ns (5ms) */
 123         .coldrive_time          = 1000, /* ns (1ms) */
 124         .keyup_test_interval    = 50, /* ms (50ms) */
 125 };
 126
 127 static struct resource bf54x_kpad_resources[] = {
 128         {
 129                 .start = IRQ_KEY,
 130                 .end = IRQ_KEY,
 131                 .flags = IORESOURCE_IRQ,
 132         },
 133 };
 134
 135 static struct platform_device bf54x_kpad_device = {
 136         .name           = "bf54x-keys",
 137         .id             = -1,
 138         .num_resources  = ARRAY_SIZE(bf54x_kpad_resources),
 139         .resource       = bf54x_kpad_resources,
 140         .dev            = {
 141                 .platform_data = &bf54x_kpad_data,
 142         },
 143 };
 144 #endif
 145
 146 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 147 static struct platform_device rtc_device = {
 148         .name = "rtc-bfin",
 149         .id   = -1,
 150 };
 151 #endif
 152
 153 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 154 static struct resource bfin_uart_resources[] = {
 155 #ifdef CONFIG_SERIAL_BFIN_UART0
 156         {
 157                 .start = 0xFFC00400,
 158                 .end = 0xFFC004FF,
 159                 .flags = IORESOURCE_MEM,
 160         },
 161 #endif
 162 #ifdef CONFIG_SERIAL_BFIN_UART1
 163         {
 164                 .start = 0xFFC02000,
 165                 .end = 0xFFC020FF,
 166                 .flags = IORESOURCE_MEM,
 167         },
 168 #endif
 169 #ifdef CONFIG_SERIAL_BFIN_UART2
 170         {
 171                 .start = 0xFFC02100,
 172                 .end = 0xFFC021FF,
 173                 .flags = IORESOURCE_MEM,
 174         },
 175 #endif
 176 #ifdef CONFIG_SERIAL_BFIN_UART3
 177         {
 178                 .start = 0xFFC03100,
 179                 .end = 0xFFC031FF,
 180                 .flags = IORESOURCE_MEM,
 181         },
 182 #endif
 183 };
 184
 185 static struct platform_device bfin_uart_device = {
 186         .name = "bfin-uart",
 187         .id = 1,
 188         .num_resources = ARRAY_SIZE(bfin_uart_resources),
 189         .resource = bfin_uart_resources,
 190 };
 191 #endif
 192
 193 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 194 static struct resource bfin_sir_resources[] = {
 195 #ifdef CONFIG_BFIN_SIR0
 196         {
 197                 .start = 0xFFC00400,
 198                 .end = 0xFFC004FF,
 199                 .flags = IORESOURCE_MEM,
 200         },
 201 #endif
 202 #ifdef CONFIG_BFIN_SIR1
 203         {
 204                 .start = 0xFFC02000,
 205                 .end = 0xFFC020FF,
 206                 .flags = IORESOURCE_MEM,
 207         },
 208 #endif
 209 #ifdef CONFIG_BFIN_SIR2
 210         {
 211                 .start = 0xFFC02100,
 212                 .end = 0xFFC021FF,
 213                 .flags = IORESOURCE_MEM,
 214         },
 215 #endif
 216 #ifdef CONFIG_BFIN_SIR3
 217         {
 218                 .start = 0xFFC03100,
 219                 .end = 0xFFC031FF,
 220                 .flags = IORESOURCE_MEM,
 221         },
 222 #endif
 223 };
 224
 225 static struct platform_device bfin_sir_device = {
 226         .name = "bfin_sir",
 227         .id = 0,
 228         .num_resources = ARRAY_SIZE(bfin_sir_resources),
 229         .resource = bfin_sir_resources,
 230 };
 231 #endif
 232
 233 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 234 static struct resource smsc911x_resources[] = {
 235         {
 236                 .name = "smsc911x-memory",
 237                 .start = 0x24000000,
 238                 .end = 0x24000000 + 0xFF,
 239                 .flags = IORESOURCE_MEM,
 240         },
 241         {
 242                 .start = IRQ_PE8,
 243                 .end = IRQ_PE8,
 244                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 245         },
 246 };
 247 static struct platform_device smsc911x_device = {
 248         .name = "smsc911x",
 249         .id = 0,
 250         .num_resources = ARRAY_SIZE(smsc911x_resources),
 251         .resource = smsc911x_resources,
 252 };
 253 #endif
 254
 255 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 256 static struct resource musb_resources[] = {
 257         [0] = {
 258                 .start  = 0xFFC03C00,
 259                 .end    = 0xFFC040FF,
 260                 .flags  = IORESOURCE_MEM,
 261         },
 262         [1] = { /* general IRQ */
 263                 .start  = IRQ_USB_INT0,
 264                 .end    = IRQ_USB_INT0,
 265                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 266         },
 267         [2] = { /* DMA IRQ */
 268                 .start  = IRQ_USB_DMA,
 269                 .end    = IRQ_USB_DMA,
 270                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 271         },
 272 };
 273
 274 static struct musb_hdrc_platform_data musb_plat = {
 275 #if defined(CONFIG_USB_MUSB_OTG)
 276         .mode           = MUSB_OTG,
 277 #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
 278         .mode           = MUSB_HOST,
 279 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 280         .mode           = MUSB_PERIPHERAL,
 281 #endif
 282         .multipoint     = 0,
 283 };
 284
 285 static u64 musb_dmamask = ~(u32)0;
 286
 287 static struct platform_device musb_device = {
 288         .name           = "musb_hdrc",
 289         .id             = 0,
 290         .dev = {
 291                 .dma_mask               = &musb_dmamask,
 292                 .coherent_dma_mask      = 0xffffffff,
 293                 .platform_data          = &musb_plat,
 294         },
 295         .num_resources  = ARRAY_SIZE(musb_resources),
 296         .resource       = musb_resources,
 297 };
 298 #endif
 299
 300 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 301 static struct resource bfin_atapi_resources[] = {
 302         {
 303                 .start = 0xFFC03800,
 304                 .end = 0xFFC0386F,
 305                 .flags = IORESOURCE_MEM,
 306         },
 307         {
 308                 .start = IRQ_ATAPI_ERR,
 309                 .end = IRQ_ATAPI_ERR,
 310                 .flags = IORESOURCE_IRQ,
 311         },
 312 };
 313
 314 static struct platform_device bfin_atapi_device = {
 315         .name = "pata-bf54x",
 316         .id = -1,
 317         .num_resources = ARRAY_SIZE(bfin_atapi_resources),
 318         .resource = bfin_atapi_resources,
 319 };
 320 #endif
 321
 322 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 323 static struct mtd_partition partition_info[] = {
 324         {
 325                 .name = "Linux Kernel",
 326                 .offset = 0,
 327                 .size = 4 * SIZE_1M,
 328         },
 329         {
 330                 .name = "File System",
 331                 .offset = MTDPART_OFS_APPEND,
 332                 .size = MTDPART_SIZ_FULL,
 333         },
 334 };
 335
 336 static struct bf5xx_nand_platform bf5xx_nand_platform = {
 337         .page_size = NFC_PG_SIZE_256,
 338         .data_width = NFC_NWIDTH_8,
 339         .partitions = partition_info,
 340         .nr_partitions = ARRAY_SIZE(partition_info),
 341         .rd_dly = 3,
 342         .wr_dly = 3,
 343 };
 344
 345 static struct resource bf5xx_nand_resources[] = {
 346         {
 347                 .start = 0xFFC03B00,
 348                 .end = 0xFFC03B4F,
 349                 .flags = IORESOURCE_MEM,
 350         },
 351         {
 352                 .start = CH_NFC,
 353                 .end = CH_NFC,
 354                 .flags = IORESOURCE_IRQ,
 355         },
 356 };
 357
 358 static struct platform_device bf5xx_nand_device = {
 359         .name = "bf5xx-nand",
 360         .id = 0,
 361         .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
 362         .resource = bf5xx_nand_resources,
 363         .dev = {
 364                 .platform_data = &bf5xx_nand_platform,
 365         },
 366 };
 367 #endif
 368
 369 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
 370 static struct platform_device bf54x_sdh_device = {
 371         .name = "bfin-sdh",
 372         .id = 0,
 373 };
 374 #endif
 375
 376 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 377 static struct mtd_partition ezkit_partitions[] = {
 378         {
 379                 .name       = "Bootloader",
 380                 .size       = 0x40000,
 381                 .offset     = 0,
 382         }, {
 383                 .name       = "Kernel",
 384                 .size       = 0x1C0000,
 385                 .offset     = MTDPART_OFS_APPEND,
 386         }, {
 387                 .name       = "RootFS",
 388                 .size       = MTDPART_SIZ_FULL,
 389                 .offset     = MTDPART_OFS_APPEND,
 390         }
 391 };
 392
 393 static struct physmap_flash_data ezkit_flash_data = {
 394         .width      = 2,
 395         .parts      = ezkit_partitions,
 396         .nr_parts   = ARRAY_SIZE(ezkit_partitions),
 397 };
 398
 399 static struct resource ezkit_flash_resource = {
 400         .start = 0x20000000,
 401         .end   = 0x20ffffff,
 402         .flags = IORESOURCE_MEM,
 403 };
 404
 405 static struct platform_device ezkit_flash_device = {
 406         .name          = "physmap-flash",
 407         .id            = 0,
 408         .dev = {
 409                 .platform_data = &ezkit_flash_data,
 410         },
 411         .num_resources = 1,
 412         .resource      = &ezkit_flash_resource,
 413 };
 414 #endif
 415
 416 #if defined(CONFIG_MTD_M25P80) \
 417         || defined(CONFIG_MTD_M25P80_MODULE)
 418 /* SPI flash chip (m25p16) */
 419 static struct mtd_partition bfin_spi_flash_partitions[] = {
 420         {
 421                 .name = "bootloader",
 422                 .size = 0x00040000,
 423                 .offset = 0,
 424                 .mask_flags = MTD_CAP_ROM
 425         }, {
 426                 .name = "linux kernel",
 427                 .size = MTDPART_SIZ_FULL,
 428                 .offset = MTDPART_OFS_APPEND,
 429         }
 430 };
 431
 432 static struct flash_platform_data bfin_spi_flash_data = {
 433         .name = "m25p80",
 434         .parts = bfin_spi_flash_partitions,
 435         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 436         .type = "m25p16",
 437 };
 438
 439 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 440         .enable_dma = 0,         /* use dma transfer with this chip*/
 441         .bits_per_word = 8,
 442         .cs_change_per_word = 0,
 443 };
 444 #endif
 445
 446 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 447         || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 448 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 449         .enable_dma = 0,
 450         .bits_per_word = 16,
 451 };
 452 #endif
 453
 454 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 455 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 456         .cs_change_per_word = 0,
 457         .enable_dma = 0,
 458         .bits_per_word = 16,
 459 };
 460
 461 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 462         .model                  = 7877,
 463         .vref_delay_usecs       = 50,   /* internal, no capacitor */
 464         .x_plate_ohms           = 419,
 465         .y_plate_ohms           = 486,
 466         .pressure_max           = 1000,
 467         .pressure_min           = 0,
 468         .stopacq_polarity       = 1,
 469         .first_conversion_delay = 3,
 470         .acquisition_time       = 1,
 471         .averaging              = 1,
 472         .pen_down_acc_interval  = 1,
 473 };
 474 #endif
 475
 476 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 477 static struct bfin5xx_spi_chip spidev_chip_info = {
 478         .enable_dma = 0,
 479         .bits_per_word = 8,
 480 };
 481 #endif
 482
 483 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 484 #if defined(CONFIG_MTD_M25P80) \
 485         || defined(CONFIG_MTD_M25P80_MODULE)
 486         {
 487                 /* the modalias must be the same as spi device driver name */
 488                 .modalias = "m25p80", /* Name of spi_driver for this device */
 489                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 490                 .bus_num = 0, /* Framework bus number */
 491                 .chip_select = 1, /* SPI_SSEL1*/
 492                 .platform_data = &bfin_spi_flash_data,
 493                 .controller_data = &spi_flash_chip_info,
 494                 .mode = SPI_MODE_3,
 495         },
 496 #endif
 497 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 498         || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 499         {
 500                 .modalias = "ad1836-spi",
 501                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 502                 .bus_num = 1,
 503                 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
 504                 .controller_data = &ad1836_spi_chip_info,
 505         },
 506 #endif
 507 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 508 {
 509         .modalias               = "ad7877",
 510         .platform_data          = &bfin_ad7877_ts_info,
 511         .irq                    = IRQ_PJ11,
 512         .max_speed_hz           = 12500000,     /* max spi clock (SCK) speed in HZ */
 513         .bus_num                = 0,
 514         .chip_select            = 2,
 515         .controller_data = &spi_ad7877_chip_info,
 516 },
 517 #endif
 518 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 519         {
 520                 .modalias = "spidev",
 521                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 522                 .bus_num = 0,
 523                 .chip_select = 1,
 524                 .controller_data = &spidev_chip_info,
 525         },
 526 #endif
 527 };
 528
 529 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 530 /* SPI (0) */
 531 static struct resource bfin_spi0_resource[] = {
 532         [0] = {
 533                 .start = SPI0_REGBASE,
 534                 .end   = SPI0_REGBASE + 0xFF,
 535                 .flags = IORESOURCE_MEM,
 536         },
 537         [1] = {
 538                 .start = CH_SPI0,
 539                 .end   = CH_SPI0,
 540                 .flags = IORESOURCE_IRQ,
 541         }
 542 };
 543
 544 /* SPI (1) */
 545 static struct resource bfin_spi1_resource[] = {
 546         [0] = {
 547                 .start = SPI1_REGBASE,
 548                 .end   = SPI1_REGBASE + 0xFF,
 549                 .flags = IORESOURCE_MEM,
 550         },
 551         [1] = {
 552                 .start = CH_SPI1,
 553                 .end   = CH_SPI1,
 554                 .flags = IORESOURCE_IRQ,
 555         }
 556 };
 557
 558 /* SPI controller data */
 559 static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
 560         .num_chipselect = 8,
 561         .enable_dma = 1,  /* master has the ability to do dma transfer */
 562         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 563 };
 564
 565 static struct platform_device bf54x_spi_master0 = {
 566         .name = "bfin-spi",
 567         .id = 0, /* Bus number */
 568         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 569         .resource = bfin_spi0_resource,
 570         .dev = {
 571                 .platform_data = &bf54x_spi_master_info0, /* Passed to driver */
 572                 },
 573 };
 574
 575 static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
 576         .num_chipselect = 8,
 577         .enable_dma = 1,  /* master has the ability to do dma transfer */
 578         .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
 579 };
 580
 581 static struct platform_device bf54x_spi_master1 = {
 582         .name = "bfin-spi",
 583         .id = 1, /* Bus number */
 584         .num_resources = ARRAY_SIZE(bfin_spi1_resource),
 585         .resource = bfin_spi1_resource,
 586         .dev = {
 587                 .platform_data = &bf54x_spi_master_info1, /* Passed to driver */
 588                 },
 589 };
 590 #endif  /* spi master and devices */
 591
 592 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 593 static struct resource bfin_twi0_resource[] = {
 594         [0] = {
 595                 .start = TWI0_REGBASE,
 596                 .end   = TWI0_REGBASE + 0xFF,
 597                 .flags = IORESOURCE_MEM,
 598         },
 599         [1] = {
 600                 .start = IRQ_TWI0,
 601                 .end   = IRQ_TWI0,
 602                 .flags = IORESOURCE_IRQ,
 603         },
 604 };
 605
 606 static struct platform_device i2c_bfin_twi0_device = {
 607         .name = "i2c-bfin-twi",
 608         .id = 0,
 609         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
 610         .resource = bfin_twi0_resource,
 611 };
 612
 613 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
 614 static struct resource bfin_twi1_resource[] = {
 615         [0] = {
 616                 .start = TWI1_REGBASE,
 617                 .end   = TWI1_REGBASE + 0xFF,
 618                 .flags = IORESOURCE_MEM,
 619         },
 620         [1] = {
 621                 .start = IRQ_TWI1,
 622                 .end   = IRQ_TWI1,
 623                 .flags = IORESOURCE_IRQ,
 624         },
 625 };
 626
 627 static struct platform_device i2c_bfin_twi1_device = {
 628         .name = "i2c-bfin-twi",
 629         .id = 1,
 630         .num_resources = ARRAY_SIZE(bfin_twi1_resource),
 631         .resource = bfin_twi1_resource,
 632 };
 633 #endif
 634 #endif
 635
 636 #ifdef CONFIG_I2C_BOARDINFO
 637 static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
 638 };
 639
 640 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
 641 static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
 642 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 643         {
 644                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 645         },
 646 #endif
 647 #if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
 648         {
 649                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 650                 .irq = 212,
 651         },
 652 #endif
 653 };
 654 #endif
 655 #endif
 656
 657 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 658 #include <linux/gpio_keys.h>
 659
 660 static struct gpio_keys_button bfin_gpio_keys_table[] = {
 661         {BTN_0, GPIO_PB8, 1, "gpio-keys: BTN0"},
 662         {BTN_1, GPIO_PB9, 1, "gpio-keys: BTN1"},
 663         {BTN_2, GPIO_PB10, 1, "gpio-keys: BTN2"},
 664         {BTN_3, GPIO_PB11, 1, "gpio-keys: BTN3"},
 665 };
 666
 667 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
 668         .buttons        = bfin_gpio_keys_table,
 669         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
 670 };
 671
 672 static struct platform_device bfin_device_gpiokeys = {
 673         .name      = "gpio-keys",
 674         .dev = {
 675                 .platform_data = &bfin_gpio_keys_data,
 676         },
 677 };
 678 #endif
 679
 680 static struct resource bfin_gpios_resources = {
 681         .start = 0,
 682         .end   = MAX_BLACKFIN_GPIOS - 1,
 683         .flags = IORESOURCE_IRQ,
 684 };
 685
 686 static struct platform_device bfin_gpios_device = {
 687         .name = "simple-gpio",
 688         .id = -1,
 689         .num_resources = 1,
 690         .resource = &bfin_gpios_resources,
 691 };
 692
 693 static const unsigned int cclk_vlev_datasheet[] =
 694 {
 695 /*
 696  * Internal VLEV BF54XSBBC1533
 697  ****temporarily using these values until data sheet is updated
 698  */
 699         VRPAIR(VLEV_085, 150000000),
 700         VRPAIR(VLEV_090, 250000000),
 701         VRPAIR(VLEV_110, 276000000),
 702         VRPAIR(VLEV_115, 301000000),
 703         VRPAIR(VLEV_120, 525000000),
 704         VRPAIR(VLEV_125, 550000000),
 705         VRPAIR(VLEV_130, 600000000),
 706 };
 707
 708 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
 709         .tuple_tab = cclk_vlev_datasheet,
 710         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
 711         .vr_settling_time = 25 /* us */,
 712 };
 713
 714 static struct platform_device bfin_dpmc = {
 715         .name = "bfin dpmc",
 716         .dev = {
 717                 .platform_data = &bfin_dmpc_vreg_data,
 718         },
 719 };
 720
 721 static struct platform_device *ezkit_devices[] __initdata = {
 722
 723         &bfin_dpmc,
 724
 725 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 726         &rtc_device,
 727 #endif
 728
 729 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 730         &bfin_uart_device,
 731 #endif
 732
 733 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 734         &bfin_sir_device,
 735 #endif
 736
 737 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
 738         &bf54x_lq043_device,
 739 #endif
 740
 741 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 742         &smsc911x_device,
 743 #endif
 744
 745 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 746         &musb_device,
 747 #endif
 748
 749 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 750         &bfin_atapi_device,
 751 #endif
 752
 753 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 754         &bf5xx_nand_device,
 755 #endif
 756
 757 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
 758         &bf54x_sdh_device,
 759 #endif
 760
 761 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 762         &bf54x_spi_master0,
 763         &bf54x_spi_master1,
 764 #endif
 765
 766 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
 767         &bf54x_kpad_device,
 768 #endif
 769
 770 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 771         &i2c_bfin_twi0_device,
 772 #if !defined(CONFIG_BF542)
 773         &i2c_bfin_twi1_device,
 774 #endif
 775 #endif
 776
 777 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 778         &bfin_device_gpiokeys,
 779 #endif
 780
 781         &bfin_gpios_device,
 782
 783 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 784         &ezkit_flash_device,
 785 #endif
 786 };
 787
 788 static int __init ezkit_init(void)
 789 {
 790         printk(KERN_INFO "%s(): registering device resources\n", __func__);
 791
 792 #ifdef CONFIG_I2C_BOARDINFO
 793         i2c_register_board_info(0, bfin_i2c_board_info0,
 794                                 ARRAY_SIZE(bfin_i2c_board_info0));
 795 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
 796         i2c_register_board_info(1, bfin_i2c_board_info1,
 797                                 ARRAY_SIZE(bfin_i2c_board_info1));
 798 #endif
 799 #endif
 800
 801         platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
 802
 803         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 804
 805         return 0;
 806 }
 807
 808 arch_initcall(ezkit_init);