arch/blackfin/mach-bf518/boards/ezbrd.c

   1 /*
   2  * File:         arch/blackfin/mach-bf518/boards/ezbrd.c
   3  * Based on:     arch/blackfin/mach-bf527/boards/ezbrd.c
   4  * Author:       Bryan Wu <cooloney@kernel.org>
   5  *
   6  * Created:
   7  * Description:
   8  *
   9  * Modified:
  10  *               Copyright 2005 National ICT Australia (NICTA)
  11  *               Copyright 2004-2008 Analog Devices Inc.
  12  *
  13  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  14  *
  15  * This program is free software; you can redistribute it and/or modify
  16  * it under the terms of the GNU General Public License as published by
  17  * the Free Software Foundation; either version 2 of the License, or
  18  * (at your option) any later version.
  19  *
  20  * This program is distributed in the hope that it will be useful,
  21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  * GNU General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License
  26  * along with this program; if not, see the file COPYING, or write
  27  * to the Free Software Foundation, Inc.,
  28  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  29  */
  30
  31 #include <linux/device.h>
  32 #include <linux/platform_device.h>
  33 #include <linux/mtd/mtd.h>
  34 #include <linux/mtd/partitions.h>
  35 #include <linux/mtd/physmap.h>
  36 #include <linux/spi/spi.h>
  37 #include <linux/spi/flash.h>
  38
  39 #include <linux/i2c.h>
  40 #include <linux/irq.h>
  41 #include <linux/interrupt.h>
  42 #include <asm/dma.h>
  43 #include <asm/bfin5xx_spi.h>
  44 #include <asm/reboot.h>
  45 #include <asm/portmux.h>
  46 #include <asm/dpmc.h>
  47 #include <asm/bfin_sdh.h>
  48 #include <linux/spi/ad7877.h>
  49
  50 /*
  51  * Name the Board for the /proc/cpuinfo
  52  */
  53 const char bfin_board_name[] = "ADI BF518F-EZBRD";
  54
  55 /*
  56  *  Driver needs to know address, irq and flag pin.
  57  */
  58
  59 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
  60 static struct mtd_partition ezbrd_partitions[] = {
  61         {
  62                 .name       = "bootloader(nor)",
  63                 .size       = 0x40000,
  64                 .offset     = 0,
  65         }, {
  66                 .name       = "linux kernel(nor)",
  67                 .size       = 0x1C0000,
  68                 .offset     = MTDPART_OFS_APPEND,
  69         }, {
  70                 .name       = "file system(nor)",
  71                 .size       = MTDPART_SIZ_FULL,
  72                 .offset     = MTDPART_OFS_APPEND,
  73         }
  74 };
  75
  76 static struct physmap_flash_data ezbrd_flash_data = {
  77         .width      = 2,
  78         .parts      = ezbrd_partitions,
  79         .nr_parts   = ARRAY_SIZE(ezbrd_partitions),
  80 };
  81
  82 static struct resource ezbrd_flash_resource = {
  83         .start = 0x20000000,
  84         .end   = 0x203fffff,
  85         .flags = IORESOURCE_MEM,
  86 };
  87
  88 static struct platform_device ezbrd_flash_device = {
  89         .name          = "physmap-flash",
  90         .id            = 0,
  91         .dev = {
  92                 .platform_data = &ezbrd_flash_data,
  93         },
  94         .num_resources = 1,
  95         .resource      = &ezbrd_flash_resource,
  96 };
  97 #endif
  98
  99 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 100 static struct platform_device rtc_device = {
 101         .name = "rtc-bfin",
 102         .id   = -1,
 103 };
 104 #endif
 105
 106 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 107 static struct platform_device bfin_mac_device = {
 108         .name = "bfin_mac",
 109 };
 110 #endif
 111
 112 #if defined(CONFIG_MTD_M25P80) \
 113         || defined(CONFIG_MTD_M25P80_MODULE)
 114 static struct mtd_partition bfin_spi_flash_partitions[] = {
 115         {
 116                 .name = "bootloader(spi)",
 117                 .size = 0x00040000,
 118                 .offset = 0,
 119                 .mask_flags = MTD_CAP_ROM
 120         }, {
 121                 .name = "linux kernel(spi)",
 122                 .size = MTDPART_SIZ_FULL,
 123                 .offset = MTDPART_OFS_APPEND,
 124         }
 125 };
 126
 127 static struct flash_platform_data bfin_spi_flash_data = {
 128         .name = "m25p80",
 129         .parts = bfin_spi_flash_partitions,
 130         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 131         .type = "m25p16",
 132 };
 133
 134 /* SPI flash chip (m25p64) */
 135 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 136         .enable_dma = 0,         /* use dma transfer with this chip*/
 137         .bits_per_word = 8,
 138 };
 139 #endif
 140
 141 #if defined(CONFIG_SPI_ADC_BF533) \
 142         || defined(CONFIG_SPI_ADC_BF533_MODULE)
 143 /* SPI ADC chip */
 144 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 145         .enable_dma = 1,         /* use dma transfer with this chip*/
 146         .bits_per_word = 16,
 147 };
 148 #endif
 149
 150 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
 151 static struct bfin5xx_spi_chip spi_mmc_chip_info = {
 152         .enable_dma = 1,
 153         .bits_per_word = 8,
 154 };
 155 #endif
 156
 157 #if defined(CONFIG_PBX)
 158 static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 159         .ctl_reg        = 0x4, /* send zero */
 160         .enable_dma     = 0,
 161         .bits_per_word  = 8,
 162         .cs_change_per_word = 1,
 163 };
 164 #endif
 165
 166 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 167 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 168         .enable_dma = 0,
 169         .bits_per_word = 16,
 170 };
 171
 172 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 173         .model                  = 7877,
 174         .vref_delay_usecs       = 50,   /* internal, no capacitor */
 175         .x_plate_ohms           = 419,
 176         .y_plate_ohms           = 486,
 177         .pressure_max           = 1000,
 178         .pressure_min           = 0,
 179         .stopacq_polarity       = 1,
 180         .first_conversion_delay = 3,
 181         .acquisition_time       = 1,
 182         .averaging              = 1,
 183         .pen_down_acc_interval  = 1,
 184 };
 185 #endif
 186
 187 #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
 188          && defined(CONFIG_SND_SOC_WM8731_SPI)
 189 static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
 190         .enable_dma = 0,
 191         .bits_per_word = 16,
 192 };
 193 #endif
 194
 195 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 196 static struct bfin5xx_spi_chip spidev_chip_info = {
 197         .enable_dma = 0,
 198         .bits_per_word = 8,
 199 };
 200 #endif
 201
 202 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 203 #if defined(CONFIG_MTD_M25P80) \
 204         || defined(CONFIG_MTD_M25P80_MODULE)
 205         {
 206                 /* the modalias must be the same as spi device driver name */
 207                 .modalias = "m25p80", /* Name of spi_driver for this device */
 208                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 209                 .bus_num = 0, /* Framework bus number */
 210                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 211                 .platform_data = &bfin_spi_flash_data,
 212                 .controller_data = &spi_flash_chip_info,
 213                 .mode = SPI_MODE_3,
 214         },
 215 #endif
 216
 217 #if defined(CONFIG_SPI_ADC_BF533) \
 218         || defined(CONFIG_SPI_ADC_BF533_MODULE)
 219         {
 220                 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 221                 .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
 222                 .bus_num = 0, /* Framework bus number */
 223                 .chip_select = 1, /* Framework chip select. */
 224                 .platform_data = NULL, /* No spi_driver specific config */
 225                 .controller_data = &spi_adc_chip_info,
 226         },
 227 #endif
 228
 229 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
 230         {
 231                 .modalias = "spi_mmc_dummy",
 232                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 233                 .bus_num = 0,
 234                 .chip_select = 0,
 235                 .platform_data = NULL,
 236                 .controller_data = &spi_mmc_chip_info,
 237                 .mode = SPI_MODE_3,
 238         },
 239         {
 240                 .modalias = "spi_mmc",
 241                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 242                 .bus_num = 0,
 243                 .chip_select = CONFIG_SPI_MMC_CS_CHAN,
 244                 .platform_data = NULL,
 245                 .controller_data = &spi_mmc_chip_info,
 246                 .mode = SPI_MODE_3,
 247         },
 248 #endif
 249 #if defined(CONFIG_PBX)
 250         {
 251                 .modalias = "fxs-spi",
 252                 .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
 253                 .bus_num = 0,
 254                 .chip_select = 8 - CONFIG_J11_JUMPER,
 255                 .controller_data = &spi_si3xxx_chip_info,
 256                 .mode = SPI_MODE_3,
 257         },
 258         {
 259                 .modalias = "fxo-spi",
 260                 .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
 261                 .bus_num = 0,
 262                 .chip_select = 8 - CONFIG_J19_JUMPER,
 263                 .controller_data = &spi_si3xxx_chip_info,
 264                 .mode = SPI_MODE_3,
 265         },
 266 #endif
 267 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 268         {
 269                 .modalias               = "ad7877",
 270                 .platform_data          = &bfin_ad7877_ts_info,
 271                 .irq                    = IRQ_PF8,
 272                 .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
 273                 .bus_num        = 0,
 274                 .chip_select  = 2,
 275                 .controller_data = &spi_ad7877_chip_info,
 276         },
 277 #endif
 278 #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
 279          && defined(CONFIG_SND_SOC_WM8731_SPI)
 280         {
 281                 .modalias       = "wm8731",
 282                 .max_speed_hz   = 3125000,     /* max spi clock (SCK) speed in HZ */
 283                 .bus_num        = 0,
 284                 .chip_select    = 5,
 285                 .controller_data = &spi_wm8731_chip_info,
 286                 .mode = SPI_MODE_0,
 287         },
 288 #endif
 289 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 290         {
 291                 .modalias = "spidev",
 292                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 293                 .bus_num = 0,
 294                 .chip_select = 1,
 295                 .controller_data = &spidev_chip_info,
 296         },
 297 #endif
 298 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 299         {
 300                 .modalias = "bfin-lq035q1-spi",
 301                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 302                 .bus_num = 0,
 303                 .chip_select = 1,
 304                 .controller_data = &lq035q1_spi_chip_info,
 305                 .mode = SPI_CPHA | SPI_CPOL,
 306         },
 307 #endif
 308 };
 309
 310 /* SPI controller data */
 311 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 312 /* SPI (0) */
 313 static struct bfin5xx_spi_master bfin_spi0_info = {
 314         .num_chipselect = 5,
 315         .enable_dma = 1,  /* master has the ability to do dma transfer */
 316         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 317 };
 318
 319 static struct resource bfin_spi0_resource[] = {
 320         [0] = {
 321                 .start = SPI0_REGBASE,
 322                 .end   = SPI0_REGBASE + 0xFF,
 323                 .flags = IORESOURCE_MEM,
 324                 },
 325         [1] = {
 326                 .start = CH_SPI0,
 327                 .end   = CH_SPI0,
 328                 .flags = IORESOURCE_IRQ,
 329         },
 330 };
 331
 332 static struct platform_device bfin_spi0_device = {
 333         .name = "bfin-spi",
 334         .id = 0, /* Bus number */
 335         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 336         .resource = bfin_spi0_resource,
 337         .dev = {
 338                 .platform_data = &bfin_spi0_info, /* Passed to driver */
 339         },
 340 };
 341
 342 /* SPI (1) */
 343 static struct bfin5xx_spi_master bfin_spi1_info = {
 344         .num_chipselect = 5,
 345         .enable_dma = 1,  /* master has the ability to do dma transfer */
 346         .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
 347 };
 348
 349 static struct resource bfin_spi1_resource[] = {
 350         [0] = {
 351                 .start = SPI1_REGBASE,
 352                 .end   = SPI1_REGBASE + 0xFF,
 353                 .flags = IORESOURCE_MEM,
 354                 },
 355         [1] = {
 356                 .start = CH_SPI1,
 357                 .end   = CH_SPI1,
 358                 .flags = IORESOURCE_IRQ,
 359         },
 360 };
 361
 362 static struct platform_device bfin_spi1_device = {
 363         .name = "bfin-spi",
 364         .id = 1, /* Bus number */
 365         .num_resources = ARRAY_SIZE(bfin_spi1_resource),
 366         .resource = bfin_spi1_resource,
 367         .dev = {
 368                 .platform_data = &bfin_spi1_info, /* Passed to driver */
 369         },
 370 };
 371 #endif  /* spi master and devices */
 372
 373 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 374 static struct resource bfin_uart_resources[] = {
 375 #ifdef CONFIG_SERIAL_BFIN_UART0
 376         {
 377                 .start = 0xFFC00400,
 378                 .end = 0xFFC004FF,
 379                 .flags = IORESOURCE_MEM,
 380         },
 381 #endif
 382 #ifdef CONFIG_SERIAL_BFIN_UART1
 383         {
 384                 .start = 0xFFC02000,
 385                 .end = 0xFFC020FF,
 386                 .flags = IORESOURCE_MEM,
 387         },
 388 #endif
 389 };
 390
 391 static struct platform_device bfin_uart_device = {
 392         .name = "bfin-uart",
 393         .id = 1,
 394         .num_resources = ARRAY_SIZE(bfin_uart_resources),
 395         .resource = bfin_uart_resources,
 396 };
 397 #endif
 398
 399 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 400 #ifdef CONFIG_BFIN_SIR0
 401 static struct resource bfin_sir0_resources[] = {
 402         {
 403                 .start = 0xFFC00400,
 404                 .end = 0xFFC004FF,
 405                 .flags = IORESOURCE_MEM,
 406         },
 407         {
 408                 .start = IRQ_UART0_RX,
 409                 .end = IRQ_UART0_RX+1,
 410                 .flags = IORESOURCE_IRQ,
 411         },
 412         {
 413                 .start = CH_UART0_RX,
 414                 .end = CH_UART0_RX+1,
 415                 .flags = IORESOURCE_DMA,
 416         },
 417 };
 418
 419 static struct platform_device bfin_sir0_device = {
 420         .name = "bfin_sir",
 421         .id = 0,
 422         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 423         .resource = bfin_sir0_resources,
 424 };
 425 #endif
 426 #ifdef CONFIG_BFIN_SIR1
 427 static struct resource bfin_sir1_resources[] = {
 428         {
 429                 .start = 0xFFC02000,
 430                 .end = 0xFFC020FF,
 431                 .flags = IORESOURCE_MEM,
 432         },
 433         {
 434                 .start = IRQ_UART1_RX,
 435                 .end = IRQ_UART1_RX+1,
 436                 .flags = IORESOURCE_IRQ,
 437         },
 438         {
 439                 .start = CH_UART1_RX,
 440                 .end = CH_UART1_RX+1,
 441                 .flags = IORESOURCE_DMA,
 442         },
 443 };
 444
 445 static struct platform_device bfin_sir1_device = {
 446         .name = "bfin_sir",
 447         .id = 1,
 448         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
 449         .resource = bfin_sir1_resources,
 450 };
 451 #endif
 452 #endif
 453
 454 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 455 static struct resource bfin_twi0_resource[] = {
 456         [0] = {
 457                 .start = TWI0_REGBASE,
 458                 .end   = TWI0_REGBASE,
 459                 .flags = IORESOURCE_MEM,
 460         },
 461         [1] = {
 462                 .start = IRQ_TWI,
 463                 .end   = IRQ_TWI,
 464                 .flags = IORESOURCE_IRQ,
 465         },
 466 };
 467
 468 static struct platform_device i2c_bfin_twi_device = {
 469         .name = "i2c-bfin-twi",
 470         .id = 0,
 471         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
 472         .resource = bfin_twi0_resource,
 473 };
 474 #endif
 475
 476 #ifdef CONFIG_I2C_BOARDINFO
 477 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 478 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 479         {
 480                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 481         },
 482 #endif
 483 #if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
 484         {
 485                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 486                 .irq = IRQ_PF8,
 487         },
 488 #endif
 489 };
 490 #endif
 491
 492 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 493 static struct platform_device bfin_sport0_uart_device = {
 494         .name = "bfin-sport-uart",
 495         .id = 0,
 496 };
 497
 498 static struct platform_device bfin_sport1_uart_device = {
 499         .name = "bfin-sport-uart",
 500         .id = 1,
 501 };
 502 #endif
 503
 504 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 505 #include <linux/input.h>
 506 #include <linux/gpio_keys.h>
 507
 508 static struct gpio_keys_button bfin_gpio_keys_table[] = {
 509         {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
 510         {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
 511 };
 512
 513 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
 514         .buttons        = bfin_gpio_keys_table,
 515         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
 516 };
 517
 518 static struct platform_device bfin_device_gpiokeys = {
 519         .name      = "gpio-keys",
 520         .dev = {
 521                 .platform_data = &bfin_gpio_keys_data,
 522         },
 523 };
 524 #endif
 525
 526 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
 527
 528 static struct bfin_sd_host bfin_sdh_data = {
 529         .dma_chan = CH_RSI,
 530         .irq_int0 = IRQ_RSI_INT0,
 531         .pin_req = {P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0},
 532 };
 533
 534 static struct platform_device bf51x_sdh_device = {
 535         .name = "bfin-sdh",
 536         .id = 0,
 537         .dev = {
 538                 .platform_data = &bfin_sdh_data,
 539         },
 540 };
 541 #endif
 542
 543 static struct resource bfin_gpios_resources = {
 544         .start = 0,
 545         .end   = MAX_BLACKFIN_GPIOS - 1,
 546         .flags = IORESOURCE_IRQ,
 547 };
 548
 549 static struct platform_device bfin_gpios_device = {
 550         .name = "simple-gpio",
 551         .id = -1,
 552         .num_resources = 1,
 553         .resource = &bfin_gpios_resources,
 554 };
 555
 556 static const unsigned int cclk_vlev_datasheet[] =
 557 {
 558         VRPAIR(VLEV_100, 400000000),
 559         VRPAIR(VLEV_105, 426000000),
 560         VRPAIR(VLEV_110, 500000000),
 561         VRPAIR(VLEV_115, 533000000),
 562         VRPAIR(VLEV_120, 600000000),
 563 };
 564
 565 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
 566         .tuple_tab = cclk_vlev_datasheet,
 567         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
 568         .vr_settling_time = 25 /* us */,
 569 };
 570
 571 static struct platform_device bfin_dpmc = {
 572         .name = "bfin dpmc",
 573         .dev = {
 574                 .platform_data = &bfin_dmpc_vreg_data,
 575         },
 576 };
 577
 578 static struct platform_device *stamp_devices[] __initdata = {
 579
 580         &bfin_dpmc,
 581
 582 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 583         &rtc_device,
 584 #endif
 585
 586 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 587         &bfin_mac_device,
 588 #endif
 589
 590 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 591         &bfin_spi0_device,
 592         &bfin_spi1_device,
 593 #endif
 594
 595 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 596         &bfin_uart_device,
 597 #endif
 598
 599 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 600 #ifdef CONFIG_BFIN_SIR0
 601         &bfin_sir0_device,
 602 #endif
 603 #ifdef CONFIG_BFIN_SIR1
 604         &bfin_sir1_device,
 605 #endif
 606 #endif
 607
 608 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 609         &i2c_bfin_twi_device,
 610 #endif
 611
 612 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 613         &bfin_sport0_uart_device,
 614         &bfin_sport1_uart_device,
 615 #endif
 616
 617 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 618         &bfin_device_gpiokeys,
 619 #endif
 620
 621 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
 622         &bf51x_sdh_device,
 623 #endif
 624
 625 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 626         &ezbrd_flash_device,
 627 #endif
 628
 629         &bfin_gpios_device,
 630 };
 631
 632 static int __init ezbrd_init(void)
 633 {
 634         printk(KERN_INFO "%s(): registering device resources\n", __func__);
 635
 636 #ifdef CONFIG_I2C_BOARDINFO
 637         i2c_register_board_info(0, bfin_i2c_board_info,
 638                                 ARRAY_SIZE(bfin_i2c_board_info));
 639 #endif
 640
 641         platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 642         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 643         return 0;
 644 }
 645
 646 arch_initcall(ezbrd_init);
 647
 648 void native_machine_restart(char *cmd)
 649 {
 650         /* workaround reboot hang when booting from SPI */
 651         if ((bfin_read_SYSCR() & 0x7) == 0x3)
 652                 bfin_gpio_reset_spi0_ssel1();
 653 }
 654
 655 void bfin_get_ether_addr(char *addr)
 656 {
 657         /* the MAC is stored in OTP memory page 0xDF */
 658         u32 ret;
 659         u64 otp_mac;
 660         u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
 661
 662         ret = otp_read(0xDF, 0x00, &otp_mac);
 663         if (!(ret & 0x1)) {
 664                 char *otp_mac_p = (char *)&otp_mac;
 665                 for (ret = 0; ret < 6; ++ret)
 666                         addr[ret] = otp_mac_p[5 - ret];
 667         }
 668 }
 669 EXPORT_SYMBOL(bfin_get_ether_addr);