]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - arch/arm/plat-omap/sram.c
[ARM] spelling fixes
[linux-2.6-omap-h63xx.git] / arch / arm / plat-omap / sram.c
1 /*
2  * linux/arch/arm/plat-omap/sram.c
3  *
4  * OMAP SRAM detection and management
5  *
6  * Copyright (C) 2005 Nokia Corporation
7  * Written by Tony Lindgren <tony@atomide.com>
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License version 2 as
11  * published by the Free Software Foundation.
12  */
13
14 #include <linux/module.h>
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17
18 #include <asm/tlb.h>
19 #include <asm/io.h>
20 #include <asm/cacheflush.h>
21
22 #include <asm/mach/map.h>
23
24 #include <asm/arch/sram.h>
25 #include <asm/arch/board.h>
26
27 #define OMAP1_SRAM_PA           0x20000000
28 #define OMAP1_SRAM_VA           0xd0000000
29 #define OMAP2_SRAM_PA           0x40200000
30 #define OMAP2_SRAM_PUB_PA       0x4020f800
31 #define OMAP2_SRAM_VA           0xd0000000
32 #define OMAP2_SRAM_PUB_VA       0xd0000800
33
34 #if defined(CONFIG_ARCH_OMAP24XX)
35 #define SRAM_BOOTLOADER_SZ      0x00
36 #else
37 #define SRAM_BOOTLOADER_SZ      0x80
38 #endif
39
40 #define VA_REQINFOPERM0         IO_ADDRESS(0x68005048)
41 #define VA_READPERM0            IO_ADDRESS(0x68005050)
42 #define VA_WRITEPERM0           IO_ADDRESS(0x68005058)
43 #define VA_CONTROL_STAT         IO_ADDRESS(0x480002F8)
44 #define GP_DEVICE               0x300
45 #define TYPE_MASK               0x700
46
47 #define ROUND_DOWN(value,boundary)      ((value) & (~((boundary)-1)))
48
49 static unsigned long omap_sram_start;
50 static unsigned long omap_sram_base;
51 static unsigned long omap_sram_size;
52 static unsigned long omap_sram_ceil;
53
54 extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
55                                          unsigned long sram_vstart,
56                                          unsigned long sram_size,
57                                          unsigned long pstart_avail,
58                                          unsigned long size_avail);
59
60 /*
61  * Depending on the target RAMFS firewall setup, the public usable amount of
62  * SRAM varies.  The default accessible size for all device types is 2k. A GP
63  * device allows ARM11 but not other initiators for full size. This
64  * functionality seems ok until some nice security API happens.
65  */
66 static int is_sram_locked(void)
67 {
68         int type = 0;
69
70         if (cpu_is_omap242x())
71                 type = __raw_readl(VA_CONTROL_STAT) & TYPE_MASK;
72
73         if (type == GP_DEVICE) {
74                 /* RAMFW: R/W access to all initiators for all qualifier sets */
75                 if (cpu_is_omap242x()) {
76                         __raw_writel(0xFF, VA_REQINFOPERM0); /* all q-vects */
77                         __raw_writel(0xCFDE, VA_READPERM0);  /* all i-read */
78                         __raw_writel(0xCFDE, VA_WRITEPERM0); /* all i-write */
79                 }
80                 return 0;
81         } else
82                 return 1; /* assume locked with no PPA or security driver */
83 }
84
85 /*
86  * The amount of SRAM depends on the core type.
87  * Note that we cannot try to test for SRAM here because writes
88  * to secure SRAM will hang the system. Also the SRAM is not
89  * yet mapped at this point.
90  */
91 void __init omap_detect_sram(void)
92 {
93         unsigned long reserved;
94
95         if (cpu_is_omap24xx()) {
96                 if (is_sram_locked()) {
97                         omap_sram_base = OMAP2_SRAM_PUB_VA;
98                         omap_sram_start = OMAP2_SRAM_PUB_PA;
99                         omap_sram_size = 0x800; /* 2K */
100                 } else {
101                         omap_sram_base = OMAP2_SRAM_VA;
102                         omap_sram_start = OMAP2_SRAM_PA;
103                         if (cpu_is_omap242x())
104                                 omap_sram_size = 0xa0000; /* 640K */
105                         else if (cpu_is_omap243x())
106                                 omap_sram_size = 0x10000; /* 64K */
107                 }
108         } else {
109                 omap_sram_base = OMAP1_SRAM_VA;
110                 omap_sram_start = OMAP1_SRAM_PA;
111
112                 if (cpu_is_omap730())
113                         omap_sram_size = 0x32000;       /* 200K */
114                 else if (cpu_is_omap15xx())
115                         omap_sram_size = 0x30000;       /* 192K */
116                 else if (cpu_is_omap1610() || cpu_is_omap1621() ||
117                      cpu_is_omap1710())
118                         omap_sram_size = 0x4000;        /* 16K */
119                 else if (cpu_is_omap1611())
120                         omap_sram_size = 0x3e800;       /* 250K */
121                 else {
122                         printk(KERN_ERR "Could not detect SRAM size\n");
123                         omap_sram_size = 0x4000;
124                 }
125         }
126         reserved = omapfb_reserve_sram(omap_sram_start, omap_sram_base,
127                                        omap_sram_size,
128                                        omap_sram_start + SRAM_BOOTLOADER_SZ,
129                                        omap_sram_size - SRAM_BOOTLOADER_SZ);
130         omap_sram_size -= reserved;
131         omap_sram_ceil = omap_sram_base + omap_sram_size;
132 }
133
134 static struct map_desc omap_sram_io_desc[] __initdata = {
135         {       /* .length gets filled in at runtime */
136                 .virtual        = OMAP1_SRAM_VA,
137                 .pfn            = __phys_to_pfn(OMAP1_SRAM_PA),
138                 .type           = MT_MEMORY
139         }
140 };
141
142 /*
143  * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
144  */
145 void __init omap_map_sram(void)
146 {
147         unsigned long base;
148
149         if (omap_sram_size == 0)
150                 return;
151
152         if (cpu_is_omap24xx()) {
153                 omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA;
154
155                 base = OMAP2_SRAM_PA;
156                 base = ROUND_DOWN(base, PAGE_SIZE);
157                 omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
158         }
159
160         omap_sram_io_desc[0].length = 1024 * 1024;      /* Use section desc */
161         iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
162
163         printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",
164         __pfn_to_phys(omap_sram_io_desc[0].pfn),
165         omap_sram_io_desc[0].virtual,
166                omap_sram_io_desc[0].length);
167
168         /*
169          * Normally devicemaps_init() would flush caches and tlb after
170          * mdesc->map_io(), but since we're called from map_io(), we
171          * must do it here.
172          */
173         local_flush_tlb_all();
174         flush_cache_all();
175
176         /*
177          * Looks like we need to preserve some bootloader code at the
178          * beginning of SRAM for jumping to flash for reboot to work...
179          */
180         memset((void *)omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
181                omap_sram_size - SRAM_BOOTLOADER_SZ);
182 }
183
184 void * omap_sram_push(void * start, unsigned long size)
185 {
186         if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
187                 printk(KERN_ERR "Not enough space in SRAM\n");
188                 return NULL;
189         }
190
191         omap_sram_ceil -= size;
192         omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, sizeof(void *));
193         memcpy((void *)omap_sram_ceil, start, size);
194
195         return (void *)omap_sram_ceil;
196 }
197
198 static void omap_sram_error(void)
199 {
200         panic("Uninitialized SRAM function\n");
201 }
202
203 #ifdef CONFIG_ARCH_OMAP1
204
205 static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
206
207 void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
208 {
209         if (!_omap_sram_reprogram_clock)
210                 omap_sram_error();
211
212         return _omap_sram_reprogram_clock(dpllctl, ckctl);
213 }
214
215 int __init omap1_sram_init(void)
216 {
217         _omap_sram_reprogram_clock = omap_sram_push(sram_reprogram_clock,
218                                                     sram_reprogram_clock_sz);
219
220         return 0;
221 }
222
223 #else
224 #define omap1_sram_init()       do {} while (0)
225 #endif
226
227 #ifdef CONFIG_ARCH_OMAP2
228
229 static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
230                               u32 base_cs, u32 force_unlock);
231
232 void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
233                    u32 base_cs, u32 force_unlock)
234 {
235         if (!_omap2_sram_ddr_init)
236                 omap_sram_error();
237
238         return _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
239                                     base_cs, force_unlock);
240 }
241
242 static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
243                                           u32 mem_type);
244
245 void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
246 {
247         if (!_omap2_sram_reprogram_sdrc)
248                 omap_sram_error();
249
250         return _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
251 }
252
253 static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
254
255 u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
256 {
257         if (!_omap2_set_prcm)
258                 omap_sram_error();
259
260         return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
261 }
262
263 int __init omap2_sram_init(void)
264 {
265         _omap2_sram_ddr_init = omap_sram_push(sram_ddr_init, sram_ddr_init_sz);
266
267         _omap2_sram_reprogram_sdrc = omap_sram_push(sram_reprogram_sdrc,
268                                                     sram_reprogram_sdrc_sz);
269         _omap2_set_prcm = omap_sram_push(sram_set_prcm, sram_set_prcm_sz);
270
271         return 0;
272 }
273 #else
274 #define omap2_sram_init()       do {} while (0)
275 #endif
276
277 int __init omap_sram_init(void)
278 {
279         omap_detect_sram();
280         omap_map_sram();
281
282         if (!cpu_is_omap24xx())
283                 omap1_sram_init();
284         else
285                 omap2_sram_init();
286
287         return 0;
288 }