arch/arm/plat-omap/devices.c

   1 /*
   2  * linux/arch/arm/plat-omap/devices.c
   3  *
   4  * Common platform device setup/initialization for OMAP1 and OMAP2
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  */
  11
  12 #include <linux/module.h>
  13 #include <linux/kernel.h>
  14 #include <linux/init.h>
  15 #include <linux/platform_device.h>
  16 #include <linux/i2c/menelaus.h>
  17
  18 #include <mach/hardware.h>
  19 #include <asm/io.h>
  20 #include <asm/mach-types.h>
  21 #include <asm/mach/map.h>
  22
  23 #include <mach/tc.h>
  24 #include <mach/control.h>
  25 #include <mach/board.h>
  26 #include <mach/mmc.h>
  27 #include <mach/mux.h>
  28 #include <mach/gpio.h>
  29 #include <mach/dsp_common.h>
  30 #include <mach/mcbsp.h>
  31
  32 #if     defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
  33
  34 static struct dsp_platform_data dsp_pdata = {
  35         .kdev_list = LIST_HEAD_INIT(dsp_pdata.kdev_list),
  36 };
  37
  38 static struct resource omap_dsp_resources[] = {
  39         {
  40                 .name   = "dsp_mmu",
  41                 .start  = -1,
  42                 .flags  = IORESOURCE_IRQ,
  43         },
  44 };
  45
  46 static struct platform_device omap_dsp_device = {
  47         .name           = "dsp",
  48         .id             = -1,
  49         .num_resources  = ARRAY_SIZE(omap_dsp_resources),
  50         .resource       = omap_dsp_resources,
  51         .dev = {
  52                 .platform_data = &dsp_pdata,
  53         },
  54 };
  55
  56 static inline void omap_init_dsp(void)
  57 {
  58         struct resource *res;
  59         int irq;
  60
  61         if (cpu_is_omap15xx())
  62                 irq = INT_1510_DSP_MMU;
  63         else if (cpu_is_omap16xx())
  64                 irq = INT_1610_DSP_MMU;
  65         else if (cpu_is_omap24xx())
  66                 irq = INT_24XX_DSP_MMU;
  67
  68         res = platform_get_resource_byname(&omap_dsp_device,
  69                                            IORESOURCE_IRQ, "dsp_mmu");
  70         res->start = irq;
  71
  72         platform_device_register(&omap_dsp_device);
  73 }
  74
  75 int dsp_kfunc_device_register(struct dsp_kfunc_device *kdev)
  76 {
  77         static DEFINE_MUTEX(dsp_pdata_lock);
  78
  79         spin_lock_init(&kdev->lock);
  80
  81         mutex_lock(&dsp_pdata_lock);
  82         list_add_tail(&kdev->entry, &dsp_pdata.kdev_list);
  83         mutex_unlock(&dsp_pdata_lock);
  84
  85         return 0;
  86 }
  87 EXPORT_SYMBOL(dsp_kfunc_device_register);
  88
  89 #else
  90 static inline void omap_init_dsp(void) { }
  91 #endif  /* CONFIG_OMAP_DSP */
  92
  93 /*-------------------------------------------------------------------------*/
  94 #if     defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
  95
  96 static void omap_init_kp(void)
  97 {
  98         /* REVISIT: 2430 keypad is on TWL4030 */
  99         if (cpu_is_omap2430() || cpu_is_omap34xx())
 100                 return;
 101
 102         if (machine_is_omap_h2() || machine_is_omap_h3()) {
 103                 omap_cfg_reg(F18_1610_KBC0);
 104                 omap_cfg_reg(D20_1610_KBC1);
 105                 omap_cfg_reg(D19_1610_KBC2);
 106                 omap_cfg_reg(E18_1610_KBC3);
 107                 omap_cfg_reg(C21_1610_KBC4);
 108
 109                 omap_cfg_reg(G18_1610_KBR0);
 110                 omap_cfg_reg(F19_1610_KBR1);
 111                 omap_cfg_reg(H14_1610_KBR2);
 112                 omap_cfg_reg(E20_1610_KBR3);
 113                 omap_cfg_reg(E19_1610_KBR4);
 114                 omap_cfg_reg(N19_1610_KBR5);
 115         } else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
 116                 omap_cfg_reg(E2_730_KBR0);
 117                 omap_cfg_reg(J7_730_KBR1);
 118                 omap_cfg_reg(E1_730_KBR2);
 119                 omap_cfg_reg(F3_730_KBR3);
 120                 omap_cfg_reg(D2_730_KBR4);
 121
 122                 omap_cfg_reg(C2_730_KBC0);
 123                 omap_cfg_reg(D3_730_KBC1);
 124                 omap_cfg_reg(E4_730_KBC2);
 125                 omap_cfg_reg(F4_730_KBC3);
 126                 omap_cfg_reg(E3_730_KBC4);
 127         } else if (machine_is_omap_h4()) {
 128                 omap_cfg_reg(T19_24XX_KBR0);
 129                 omap_cfg_reg(R19_24XX_KBR1);
 130                 omap_cfg_reg(V18_24XX_KBR2);
 131                 omap_cfg_reg(M21_24XX_KBR3);
 132                 omap_cfg_reg(E5__24XX_KBR4);
 133                 if (omap_has_menelaus()) {
 134                         omap_cfg_reg(B3__24XX_KBR5);
 135                         omap_cfg_reg(AA4_24XX_KBC2);
 136                         omap_cfg_reg(B13_24XX_KBC6);
 137                 } else {
 138                         omap_cfg_reg(M18_24XX_KBR5);
 139                         omap_cfg_reg(H19_24XX_KBC2);
 140                         omap_cfg_reg(N19_24XX_KBC6);
 141                 }
 142                 omap_cfg_reg(R20_24XX_KBC0);
 143                 omap_cfg_reg(M14_24XX_KBC1);
 144                 omap_cfg_reg(V17_24XX_KBC3);
 145                 omap_cfg_reg(P21_24XX_KBC4);
 146                 omap_cfg_reg(L14_24XX_KBC5);
 147         }
 148 }
 149 #else
 150 static inline void omap_init_kp(void) {}
 151 #endif
 152
 153 /*-------------------------------------------------------------------------*/
 154 #if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE)
 155
 156 static struct platform_device **omap_mcbsp_devices;
 157
 158 void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 159                                         int size)
 160 {
 161         int i;
 162
 163         omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
 164                                      GFP_KERNEL);
 165         if (!omap_mcbsp_devices) {
 166                 printk(KERN_ERR "Could not register McBSP devices\n");
 167                 return;
 168         }
 169
 170         for (i = 0; i < size; i++) {
 171                 struct platform_device *new_mcbsp;
 172                 int ret;
 173
 174                 new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
 175                 if (!new_mcbsp)
 176                         continue;
 177                 new_mcbsp->dev.platform_data = &config[i];
 178                 ret = platform_device_add(new_mcbsp);
 179                 if (ret) {
 180                         platform_device_put(new_mcbsp);
 181                         continue;
 182                 }
 183                 omap_mcbsp_devices[i] = new_mcbsp;
 184         }
 185 }
 186
 187 #else
 188 void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 189                                         int size)
 190 {  }
 191 #endif
 192
 193 /*-------------------------------------------------------------------------*/
 194
 195 #if     defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) \
 196         || defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
 197
 198 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 199 #define OMAP_MMC1_BASE          0x4809c000
 200 #define OMAP_MMC1_END           OMAP_MMC1_BASE + 0x1fc
 201 #define OMAP_MMC1_INT           INT_24XX_MMC_IRQ
 202
 203 #define OMAP_MMC2_BASE          0x480b4000
 204 #define OMAP_MMC2_END           OMAP_MMC2_BASE + 0x1fc
 205 #define OMAP_MMC2_INT           INT_24XX_MMC2_IRQ
 206
 207 #else
 208
 209 #define OMAP_MMC1_BASE          0xfffb7800
 210 #define OMAP_MMC1_END           OMAP_MMC1_BASE + 0x7f
 211 #define OMAP_MMC1_INT           INT_MMC
 212
 213 #define OMAP_MMC2_BASE          0xfffb7c00      /* omap16xx only */
 214 #define OMAP_MMC2_END           OMAP_MMC2_BASE + 0x7f
 215 #define OMAP_MMC2_INT           INT_1610_MMC2
 216
 217 #endif
 218
 219 static struct omap_mmc_platform_data mmc1_data;
 220
 221 static u64 mmc1_dmamask = 0xffffffff;
 222
 223 static struct resource mmc1_resources[] = {
 224         {
 225                 .start          = OMAP_MMC1_BASE,
 226                 .end            = OMAP_MMC1_END,
 227                 .flags          = IORESOURCE_MEM,
 228         },
 229         {
 230                 .start          = OMAP_MMC1_INT,
 231                 .flags          = IORESOURCE_IRQ,
 232         },
 233 };
 234
 235 static struct platform_device mmc_omap_device1 = {
 236         .name           = "mmci-omap",
 237         .id             = 1,
 238         .dev = {
 239                 .dma_mask       = &mmc1_dmamask,
 240                 .platform_data  = &mmc1_data,
 241         },
 242         .num_resources  = ARRAY_SIZE(mmc1_resources),
 243         .resource       = mmc1_resources,
 244 };
 245
 246 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
 247         defined(CONFIG_ARCH_OMAP34XX)
 248
 249 static struct omap_mmc_platform_data mmc2_data;
 250
 251 static u64 mmc2_dmamask = 0xffffffff;
 252
 253
 254 static struct resource mmc2_resources[] = {
 255         {
 256                 .start          = OMAP_MMC2_BASE,
 257                 .end            = OMAP_MMC2_END,
 258                 .flags          = IORESOURCE_MEM,
 259         },
 260         {
 261                 .start          = OMAP_MMC2_INT,
 262                 .flags          = IORESOURCE_IRQ,
 263         },
 264 };
 265
 266 static struct platform_device mmc_omap_device2 = {
 267         .name           = "mmci-omap",
 268         .id             = 2,
 269         .dev = {
 270                 .dma_mask       = &mmc2_dmamask,
 271                 .platform_data  = &mmc2_data,
 272         },
 273         .num_resources  = ARRAY_SIZE(mmc2_resources),
 274         .resource       = mmc2_resources,
 275 };
 276 #endif
 277
 278 static void __init omap_init_mmc(void)
 279 {
 280         const struct omap_mmc_config    *mmc_conf;
 281         const struct omap_mmc_conf      *mmc;
 282
 283         /* NOTE:  assumes MMC was never (wrongly) enabled */
 284         mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
 285         if (!mmc_conf)
 286                 return;
 287
 288         /* block 1 is always available and has just one pinout option */
 289         mmc = &mmc_conf->mmc[0];
 290
 291         if (cpu_is_omap2430() || cpu_is_omap34xx()) {
 292                 if (mmc->enabled)
 293                         (void) platform_device_register(&mmc_omap_device1);
 294
 295 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
 296                 mmc = &mmc_conf->mmc[1];
 297                 if (mmc->enabled)
 298                         (void) platform_device_register(&mmc_omap_device2);
 299 #endif
 300
 301                 return;
 302         }
 303
 304         if (mmc->enabled) {
 305                 if (cpu_is_omap24xx()) {
 306                         omap_cfg_reg(H18_24XX_MMC_CMD);
 307                         omap_cfg_reg(H15_24XX_MMC_CLKI);
 308                         omap_cfg_reg(G19_24XX_MMC_CLKO);
 309                         omap_cfg_reg(F20_24XX_MMC_DAT0);
 310                         omap_cfg_reg(F19_24XX_MMC_DAT_DIR0);
 311                         omap_cfg_reg(G18_24XX_MMC_CMD_DIR);
 312                 } else {
 313                         omap_cfg_reg(MMC_CMD);
 314                         omap_cfg_reg(MMC_CLK);
 315                         omap_cfg_reg(MMC_DAT0);
 316                         if (cpu_is_omap1710()) {
 317                                 omap_cfg_reg(M15_1710_MMC_CLKI);
 318                                 omap_cfg_reg(P19_1710_MMC_CMDDIR);
 319                                 omap_cfg_reg(P20_1710_MMC_DATDIR0);
 320                         }
 321                 }
 322                 if (mmc->wire4) {
 323                         if (cpu_is_omap24xx()) {
 324                                 omap_cfg_reg(H14_24XX_MMC_DAT1);
 325                                 omap_cfg_reg(E19_24XX_MMC_DAT2);
 326                                 omap_cfg_reg(D19_24XX_MMC_DAT3);
 327                                 omap_cfg_reg(E20_24XX_MMC_DAT_DIR1);
 328                                 omap_cfg_reg(F18_24XX_MMC_DAT_DIR2);
 329                                 omap_cfg_reg(E18_24XX_MMC_DAT_DIR3);
 330                         } else {
 331                                 omap_cfg_reg(MMC_DAT1);
 332                                 /* NOTE:  DAT2 can be on W10 (here) or M15 */
 333                                 if (!mmc->nomux)
 334                                         omap_cfg_reg(MMC_DAT2);
 335                                 omap_cfg_reg(MMC_DAT3);
 336                         }
 337                 }
 338 #if defined(CONFIG_ARCH_OMAP2420)
 339                 if (mmc->internal_clock) {
 340                         /*
 341                          * Use internal loop-back in MMC/SDIO
 342                          * Module Input Clock selection
 343                          */
 344                         if (cpu_is_omap24xx()) {
 345                                 u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
 346                                 v |= (1 << 24); /* not used in 243x */
 347                                 omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
 348                         }
 349                 }
 350 #endif
 351                 mmc1_data.conf = *mmc;
 352                 (void) platform_device_register(&mmc_omap_device1);
 353         }
 354
 355 #ifdef  CONFIG_ARCH_OMAP16XX
 356         /* block 2 is on newer chips, and has many pinout options */
 357         mmc = &mmc_conf->mmc[1];
 358         if (mmc->enabled) {
 359                 if (!mmc->nomux) {
 360                         omap_cfg_reg(Y8_1610_MMC2_CMD);
 361                         omap_cfg_reg(Y10_1610_MMC2_CLK);
 362                         omap_cfg_reg(R18_1610_MMC2_CLKIN);
 363                         omap_cfg_reg(W8_1610_MMC2_DAT0);
 364                         if (mmc->wire4) {
 365                                 omap_cfg_reg(V8_1610_MMC2_DAT1);
 366                                 omap_cfg_reg(W15_1610_MMC2_DAT2);
 367                                 omap_cfg_reg(R10_1610_MMC2_DAT3);
 368                         }
 369
 370                         /* These are needed for the level shifter */
 371                         omap_cfg_reg(V9_1610_MMC2_CMDDIR);
 372                         omap_cfg_reg(V5_1610_MMC2_DATDIR0);
 373                         omap_cfg_reg(W19_1610_MMC2_DATDIR1);
 374                 }
 375
 376                 /* Feedback clock must be set on OMAP-1710 MMC2 */
 377                 if (cpu_is_omap1710())
 378                         omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
 379                                      MOD_CONF_CTRL_1);
 380                 mmc2_data.conf = *mmc;
 381                 (void) platform_device_register(&mmc_omap_device2);
 382         }
 383 #endif
 384         return;
 385 }
 386
 387 void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info)
 388 {
 389         switch (host) {
 390         case 1:
 391                 mmc1_data = *info;
 392                 break;
 393 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
 394         defined(CONFIG_ARCH_OMAP34XX)
 395         case 2:
 396                 mmc2_data = *info;
 397                 break;
 398 #endif
 399         default:
 400                 BUG();
 401         }
 402 }
 403
 404 #else
 405 void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) {}
 406 static inline void omap_init_mmc(void) {}
 407 #endif
 408
 409 /*-------------------------------------------------------------------------*/
 410
 411 /* Numbering for the SPI-capable controllers when used for SPI:
 412  * spi          = 1
 413  * uwire        = 2
 414  * mmc1..2      = 3..4
 415  * mcbsp1..3    = 5..7
 416  */
 417
 418 #if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
 419
 420 #define OMAP_UWIRE_BASE         0xfffb3000
 421
 422 static struct resource uwire_resources[] = {
 423         {
 424                 .start          = OMAP_UWIRE_BASE,
 425                 .end            = OMAP_UWIRE_BASE + 0x20,
 426                 .flags          = IORESOURCE_MEM,
 427         },
 428 };
 429
 430 static struct platform_device omap_uwire_device = {
 431         .name      = "omap_uwire",
 432         .id          = -1,
 433         .num_resources  = ARRAY_SIZE(uwire_resources),
 434         .resource       = uwire_resources,
 435 };
 436
 437 static void omap_init_uwire(void)
 438 {
 439         /* FIXME define and use a boot tag; not all boards will be hooking
 440          * up devices to the microwire controller, and multi-board configs
 441          * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
 442          */
 443
 444         /* board-specific code must configure chipselects (only a few
 445          * are normally used) and SCLK/SDI/SDO (each has two choices).
 446          */
 447         (void) platform_device_register(&omap_uwire_device);
 448 }
 449 #else
 450 static inline void omap_init_uwire(void) {}
 451 #endif
 452
 453 /*-------------------------------------------------------------------------*/
 454
 455 #if     defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
 456
 457 #if defined(CONFIG_ARCH_OMAP34XX)
 458 #define OMAP_WDT_BASE           0x48314000
 459 #elif defined(CONFIG_ARCH_OMAP24XX)
 460
 461 #ifdef CONFIG_ARCH_OMAP2430
 462 /* WDT2 */
 463 #define OMAP_WDT_BASE           0x49016000
 464 #else
 465 #define OMAP_WDT_BASE           0x48022000
 466 #endif
 467
 468 #else
 469 #define OMAP_WDT_BASE           0xfffeb000
 470 #endif
 471
 472 static struct resource wdt_resources[] = {
 473         {
 474                 .start          = OMAP_WDT_BASE,
 475                 .end            = OMAP_WDT_BASE + 0x4f,
 476                 .flags          = IORESOURCE_MEM,
 477         },
 478 };
 479
 480 static struct platform_device omap_wdt_device = {
 481         .name      = "omap_wdt",
 482         .id          = -1,
 483         .num_resources  = ARRAY_SIZE(wdt_resources),
 484         .resource       = wdt_resources,
 485 };
 486
 487 static void omap_init_wdt(void)
 488 {
 489         (void) platform_device_register(&omap_wdt_device);
 490 }
 491 #else
 492 static inline void omap_init_wdt(void) {}
 493 #endif
 494
 495 /*-------------------------------------------------------------------------*/
 496
 497 #if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
 498
 499 #ifdef CONFIG_ARCH_OMAP24XX
 500 #define OMAP_RNG_BASE           0x480A0000
 501 #else
 502 #define OMAP_RNG_BASE           0xfffe5000
 503 #endif
 504
 505 static struct resource rng_resources[] = {
 506         {
 507                 .start          = OMAP_RNG_BASE,
 508                 .end            = OMAP_RNG_BASE + 0x4f,
 509                 .flags          = IORESOURCE_MEM,
 510         },
 511 };
 512
 513 static struct platform_device omap_rng_device = {
 514         .name      = "omap_rng",
 515         .id          = -1,
 516         .num_resources  = ARRAY_SIZE(rng_resources),
 517         .resource       = rng_resources,
 518 };
 519
 520 static void omap_init_rng(void)
 521 {
 522         (void) platform_device_register(&omap_rng_device);
 523 }
 524 #else
 525 static inline void omap_init_rng(void) {}
 526 #endif
 527
 528 /*
 529  * This gets called after board-specific INIT_MACHINE, and initializes most
 530  * on-chip peripherals accessible on this board (except for few like USB):
 531  *
 532  *  (a) Does any "standard config" pin muxing needed.  Board-specific
 533  *      code will have muxed GPIO pins and done "nonstandard" setup;
 534  *      that code could live in the boot loader.
 535  *  (b) Populating board-specific platform_data with the data drivers
 536  *      rely on to handle wiring variations.
 537  *  (c) Creating platform devices as meaningful on this board and
 538  *      with this kernel configuration.
 539  *
 540  * Claiming GPIOs, and setting their direction and initial values, is the
 541  * responsibility of the device drivers.  So is responding to probe().
 542  *
 543  * Board-specific knowlege like creating devices or pin setup is to be
 544  * kept out of drivers as much as possible.  In particular, pin setup
 545  * may be handled by the boot loader, and drivers should expect it will
 546  * normally have been done by the time they're probed.
 547  */
 548 static int __init omap_init_devices(void)
 549 {
 550         /* please keep these calls, and their implementations above,
 551          * in alphabetical order so they're easier to sort through.
 552          */
 553         omap_init_dsp();
 554         omap_init_kp();
 555         omap_init_mmc();
 556         omap_init_uwire();
 557         omap_init_wdt();
 558         omap_init_rng();
 559         return 0;
 560 }
 561 arch_initcall(omap_init_devices);