2 * linux/arch/arm/mach-omap2/board-omap3beagle.c
4 * Copyright (C) 2008 Texas Instruments
6 * Modified from mach-omap2/board-3430sdp.c
8 * Initial code: Syed Mohammed Khasim
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/delay.h>
19 #include <linux/err.h>
20 #include <linux/clk.h>
22 #include <linux/leds.h>
23 #include <linux/mtd/mtd.h>
24 #include <linux/mtd/partitions.h>
25 #include <linux/mtd/nand.h>
27 #include <mach/hardware.h>
28 #include <asm/mach-types.h>
29 #include <asm/mach/arch.h>
30 #include <asm/mach/map.h>
31 #include <asm/mach/flash.h>
33 #include <mach/gpio.h>
34 #include <mach/board.h>
35 #include <mach/usb-musb.h>
36 #include <mach/usb-ehci.h>
37 #include <mach/hsmmc.h>
38 #include <mach/common.h>
39 #include <mach/gpmc.h>
40 #include <mach/nand.h>
42 #define GPMC_CS0_BASE 0x60
43 #define GPMC_CS_SIZE 0x30
45 static struct mtd_partition omap3beagle_nand_partitions[] = {
46 /* All the partition sizes are listed in terms of NAND block size */
50 .size = 4*(64 * 2048),
51 .mask_flags = MTD_WRITEABLE, /* force read-only */
55 .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
56 .size = 15*(64 * 2048),
57 .mask_flags = MTD_WRITEABLE, /* force read-only */
61 .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
62 .size = 1*(64 * 2048),
66 .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
67 .size = 32*(64 * 2048),
70 .name = "File System",
71 .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
72 .size = MTDPART_SIZ_FULL,
76 static struct omap_nand_platform_data omap3beagle_nand_data = {
77 .parts = omap3beagle_nand_partitions,
78 .nr_parts = ARRAY_SIZE(omap3beagle_nand_partitions),
79 .dma_channel = -1, /* disable DMA in OMAP NAND driver */
84 static struct resource omap3beagle_nand_resource = {
85 .flags = IORESOURCE_MEM,
88 static struct platform_device omap3beagle_nand_device = {
92 .platform_data = &omap3beagle_nand_data,
95 .resource = &omap3beagle_nand_resource,
98 #include "sdram-micron-mt46h32m32lf-6.h"
100 static struct omap_uart_config omap3_beagle_uart_config __initdata = {
101 .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
104 static int __init omap3_beagle_i2c_init(void)
106 omap_register_i2c_bus(1, 2600, NULL, 0);
107 #ifdef CONFIG_I2C2_OMAP_BEAGLE
108 omap_register_i2c_bus(2, 400, NULL, 0);
110 omap_register_i2c_bus(3, 400, NULL, 0);
114 static void __init omap3_beagle_init_irq(void)
116 omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
121 static struct omap_mmc_config omap3beagle_mmc_config __initdata = {
128 static struct platform_device omap3_beagle_twl4030rtc_device = {
129 .name = "twl4030_rtc",
133 static struct platform_device omap3_beagle_lcd_device = {
134 .name = "omap3beagle_lcd",
138 static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
139 .ctrl_name = "internal",
142 static struct gpio_led gpio_leds[] = {
144 .name = "beagleboard::usr0",
145 .default_trigger = "heartbeat",
149 .name = "beagleboard::usr1",
150 .default_trigger = "mmc0",
155 static struct gpio_led_platform_data gpio_led_info = {
157 .num_leds = ARRAY_SIZE(gpio_leds),
160 static struct platform_device leds_gpio = {
164 .platform_data = &gpio_led_info,
168 static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
169 { OMAP_TAG_UART, &omap3_beagle_uart_config },
170 { OMAP_TAG_MMC, &omap3beagle_mmc_config },
171 { OMAP_TAG_LCD, &omap3_beagle_lcd_config },
174 static struct platform_device *omap3_beagle_devices[] __initdata = {
175 &omap3_beagle_lcd_device,
176 #ifdef CONFIG_RTC_DRV_TWL4030
177 &omap3_beagle_twl4030rtc_device,
182 void __init omap3beagle_flash_init(void)
185 u8 nandcs = GPMC_CS_NUM + 1;
187 u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
189 /* find out the chip-select on which NAND exists */
190 while (cs < GPMC_CS_NUM) {
192 ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
194 if ((ret & 0xC00) == 0x800) {
195 printk(KERN_INFO "Found NAND on CS%d\n", cs);
196 if (nandcs > GPMC_CS_NUM)
202 if (nandcs > GPMC_CS_NUM) {
203 printk(KERN_INFO "NAND: Unable to find configuration "
208 if (nandcs < GPMC_CS_NUM) {
209 omap3beagle_nand_data.cs = nandcs;
210 omap3beagle_nand_data.gpmc_cs_baseaddr = (void *)
211 (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
212 omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
214 printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
215 if (platform_device_register(&omap3beagle_nand_device) < 0)
216 printk(KERN_ERR "Unable to register NAND device\n");
220 static void __init omap3_beagle_init(void)
222 platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices));
223 omap_board_config = omap3_beagle_config;
224 omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
229 omap3beagle_flash_init();
232 arch_initcall(omap3_beagle_i2c_init);
234 static void __init omap3_beagle_map_io(void)
236 omap2_set_globals_343x();
237 omap2_map_common_io();
240 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
241 /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
242 .phys_io = 0x48000000,
243 .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
244 .boot_params = 0x80000100,
245 .map_io = omap3_beagle_map_io,
246 .init_irq = omap3_beagle_init_irq,
247 .init_machine = omap3_beagle_init,
248 .timer = &omap_timer,