]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - arch/arm/mach-omap1/devices.c
Merge current mainline tree into linux-omap tree
[linux-2.6-omap-h63xx.git] / arch / arm / mach-omap1 / devices.c
1 /*
2  * linux/arch/arm/mach-omap1/devices.c
3  *
4  * OMAP1 platform device setup/initialization
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  */
11
12 #include <linux/module.h>
13 #include <linux/kernel.h>
14 #include <linux/init.h>
15 #include <linux/platform_device.h>
16 #include <linux/io.h>
17
18 #include <mach/hardware.h>
19 #include <asm/mach/map.h>
20
21 #include <mach/tc.h>
22 #include <mach/board.h>
23 #include <mach/mux.h>
24 #include <mach/gpio.h>
25 #include <mach/mmc.h>
26
27 /*-------------------------------------------------------------------------*/
28
29 #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
30
31 #define OMAP_RTC_BASE           0xfffb4800
32
33 static struct resource rtc_resources[] = {
34         {
35                 .start          = OMAP_RTC_BASE,
36                 .end            = OMAP_RTC_BASE + 0x5f,
37                 .flags          = IORESOURCE_MEM,
38         },
39         {
40                 .start          = INT_RTC_TIMER,
41                 .flags          = IORESOURCE_IRQ,
42         },
43         {
44                 .start          = INT_RTC_ALARM,
45                 .flags          = IORESOURCE_IRQ,
46         },
47 };
48
49 static struct platform_device omap_rtc_device = {
50         .name           = "omap_rtc",
51         .id             = -1,
52         .num_resources  = ARRAY_SIZE(rtc_resources),
53         .resource       = rtc_resources,
54 };
55
56 static void omap_init_rtc(void)
57 {
58         (void) platform_device_register(&omap_rtc_device);
59 }
60 #else
61 static inline void omap_init_rtc(void) {}
62 #endif
63
64 #if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
65
66 #if defined(CONFIG_ARCH_OMAP15XX)
67 #  define OMAP1_MBOX_SIZE       0x23
68 #  define INT_DSP_MAILBOX1      INT_1510_DSP_MAILBOX1
69 #elif defined(CONFIG_ARCH_OMAP16XX)
70 #  define OMAP1_MBOX_SIZE       0x2f
71 #  define INT_DSP_MAILBOX1      INT_1610_DSP_MAILBOX1
72 #endif
73
74 #define OMAP1_MBOX_BASE         IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
75
76 static struct resource mbox_resources[] = {
77         {
78                 .start          = OMAP1_MBOX_BASE,
79                 .end            = OMAP1_MBOX_BASE + OMAP1_MBOX_SIZE,
80                 .flags          = IORESOURCE_MEM,
81         },
82         {
83                 .start          = INT_DSP_MAILBOX1,
84                 .flags          = IORESOURCE_IRQ,
85         },
86 };
87
88 static struct platform_device mbox_device = {
89         .name           = "mailbox",
90         .id             = -1,
91         .num_resources  = ARRAY_SIZE(mbox_resources),
92         .resource       = mbox_resources,
93 };
94
95 static inline void omap_init_mbox(void)
96 {
97         platform_device_register(&mbox_device);
98 }
99 #else
100 static inline void omap_init_mbox(void) { }
101 #endif
102
103 /*-------------------------------------------------------------------------*/
104
105 #if     defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
106
107 static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
108                         int controller_nr)
109 {
110         if (controller_nr == 0) {
111                 omap_cfg_reg(MMC_CMD);
112                 omap_cfg_reg(MMC_CLK);
113                 omap_cfg_reg(MMC_DAT0);
114                 if (cpu_is_omap1710()) {
115                         omap_cfg_reg(M15_1710_MMC_CLKI);
116                         omap_cfg_reg(P19_1710_MMC_CMDDIR);
117                         omap_cfg_reg(P20_1710_MMC_DATDIR0);
118                 }
119                 if (mmc_controller->slots[0].wire4) {
120                         omap_cfg_reg(MMC_DAT1);
121                         /* NOTE: DAT2 can be on W10 (here) or M15 */
122                         if (!mmc_controller->slots[0].nomux)
123                                 omap_cfg_reg(MMC_DAT2);
124                         omap_cfg_reg(MMC_DAT3);
125                 }
126         }
127
128         /* Block 2 is on newer chips, and has many pinout options */
129         if (cpu_is_omap16xx() && controller_nr == 1) {
130                 if (!mmc_controller->slots[1].nomux) {
131                         omap_cfg_reg(Y8_1610_MMC2_CMD);
132                         omap_cfg_reg(Y10_1610_MMC2_CLK);
133                         omap_cfg_reg(R18_1610_MMC2_CLKIN);
134                         omap_cfg_reg(W8_1610_MMC2_DAT0);
135                         if (mmc_controller->slots[1].wire4) {
136                                 omap_cfg_reg(V8_1610_MMC2_DAT1);
137                                 omap_cfg_reg(W15_1610_MMC2_DAT2);
138                                 omap_cfg_reg(R10_1610_MMC2_DAT3);
139                         }
140
141                         /* These are needed for the level shifter */
142                         omap_cfg_reg(V9_1610_MMC2_CMDDIR);
143                         omap_cfg_reg(V5_1610_MMC2_DATDIR0);
144                         omap_cfg_reg(W19_1610_MMC2_DATDIR1);
145                 }
146
147                 /* Feedback clock must be set on OMAP-1710 MMC2 */
148                 if (cpu_is_omap1710())
149                         omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
150                                         MOD_CONF_CTRL_1);
151         }
152 }
153
154 void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
155                         int nr_controllers)
156 {
157         int i;
158
159         for (i = 0; i < nr_controllers; i++) {
160                 unsigned long base, size;
161                 unsigned int irq = 0;
162
163                 if (!mmc_data[i])
164                         continue;
165
166                 omap1_mmc_mux(mmc_data[i], i);
167
168                 switch (i) {
169                 case 0:
170                         base = OMAP1_MMC1_BASE;
171                         irq = INT_MMC;
172                         break;
173                 case 1:
174                         if (!cpu_is_omap16xx())
175                                 return;
176                         base = OMAP1_MMC2_BASE;
177                         irq = INT_1610_MMC2;
178                         break;
179                 default:
180                         continue;
181                 }
182                 size = OMAP1_MMC_SIZE;
183
184                 omap_mmc_add(i, base, size, irq, mmc_data[i]);
185         };
186 }
187
188 #endif
189
190 /*-------------------------------------------------------------------------*/
191
192 #if defined(CONFIG_OMAP_STI)
193
194 #define OMAP1_STI_BASE          0xfffea000
195 #define OMAP1_STI_CHANNEL_BASE  (OMAP1_STI_BASE + 0x400)
196
197 static struct resource sti_resources[] = {
198         {
199                 .start          = OMAP1_STI_BASE,
200                 .end            = OMAP1_STI_BASE + SZ_1K - 1,
201                 .flags          = IORESOURCE_MEM,
202         },
203         {
204                 .start          = OMAP1_STI_CHANNEL_BASE,
205                 .end            = OMAP1_STI_CHANNEL_BASE + SZ_1K - 1,
206                 .flags          = IORESOURCE_MEM,
207         },
208         {
209                 .start          = INT_1610_STI,
210                 .flags          = IORESOURCE_IRQ,
211         }
212 };
213
214 static struct platform_device sti_device = {
215         .name           = "sti",
216         .id             = -1,
217         .num_resources  = ARRAY_SIZE(sti_resources),
218         .resource       = sti_resources,
219 };
220
221 static inline void omap_init_sti(void)
222 {
223         platform_device_register(&sti_device);
224 }
225 #else
226 static inline void omap_init_sti(void) {}
227 #endif
228
229 /*-------------------------------------------------------------------------*/
230
231 /*
232  * This gets called after board-specific INIT_MACHINE, and initializes most
233  * on-chip peripherals accessible on this board (except for few like USB):
234  *
235  *  (a) Does any "standard config" pin muxing needed.  Board-specific
236  *      code will have muxed GPIO pins and done "nonstandard" setup;
237  *      that code could live in the boot loader.
238  *  (b) Populating board-specific platform_data with the data drivers
239  *      rely on to handle wiring variations.
240  *  (c) Creating platform devices as meaningful on this board and
241  *      with this kernel configuration.
242  *
243  * Claiming GPIOs, and setting their direction and initial values, is the
244  * responsibility of the device drivers.  So is responding to probe().
245  *
246  * Board-specific knowlege like creating devices or pin setup is to be
247  * kept out of drivers as much as possible.  In particular, pin setup
248  * may be handled by the boot loader, and drivers should expect it will
249  * normally have been done by the time they're probed.
250  */
251 static int __init omap1_init_devices(void)
252 {
253         /* please keep these calls, and their implementations above,
254          * in alphabetical order so they're easier to sort through.
255          */
256
257         omap_init_mbox();
258         omap_init_rtc();
259         omap_init_sti();
260
261         return 0;
262 }
263 arch_initcall(omap1_init_devices);
264