arch/arm/mach-omap1/board-palmte.c

   1 /*
   2  * linux/arch/arm/mach-omap1/board-palmte.c
   3  *
   4  * Modified from board-generic.c
   5  *
   6  * Support for the Palm Tungsten E PDA.
   7  *
   8  * Original version : Laurent Gonzalez
   9  *
  10  * Maintainers : http://palmtelinux.sf.net
  11  *                palmtelinux-developpers@lists.sf.net
  12  *
  13  * This program is free software; you can redistribute it and/or modify
  14  * it under the terms of the GNU General Public License version 2 as
  15  * published by the Free Software Foundation.
  16  */
  17
  18 #include <linux/kernel.h>
  19 #include <linux/init.h>
  20 #include <linux/input.h>
  21 #include <linux/platform_device.h>
  22 #include <linux/mtd/mtd.h>
  23 #include <linux/mtd/partitions.h>
  24 #include <linux/spi/spi.h>
  25 #include <linux/spi/tsc2102.h>
  26 #include <linux/interrupt.h>
  27
  28 #include <asm/apm.h>
  29 #include <asm/hardware.h>
  30 #include <asm/mach-types.h>
  31 #include <asm/mach/arch.h>
  32 #include <asm/mach/map.h>
  33 #include <asm/mach/flash.h>
  34
  35 #include <asm/arch/gpio.h>
  36 #include <asm/arch/mux.h>
  37 #include <asm/arch/usb.h>
  38 #include <asm/arch/tc.h>
  39 #include <asm/arch/dma.h>
  40 #include <asm/arch/board.h>
  41 #include <asm/arch/irda.h>
  42 #include <asm/arch/keypad.h>
  43 #include <asm/arch/common.h>
  44 #include <asm/arch/mcbsp.h>
  45 #include <asm/arch/omap-alsa.h>
  46
  47 static void __init omap_palmte_init_irq(void)
  48 {
  49         omap1_init_common_hw();
  50         omap_init_irq();
  51         omap_gpio_init();
  52 }
  53
  54 static int palmte_keymap[] = {
  55         KEY(0, 0, KEY_F1),
  56         KEY(0, 1, KEY_F2),
  57         KEY(0, 2, KEY_F3),
  58         KEY(0, 3, KEY_F4),
  59         KEY(0, 4, KEY_POWER),
  60         KEY(1, 0, KEY_LEFT),
  61         KEY(1, 1, KEY_DOWN),
  62         KEY(1, 2, KEY_UP),
  63         KEY(1, 3, KEY_RIGHT),
  64         KEY(1, 4, KEY_CENTER),
  65         0,
  66 };
  67
  68 static struct omap_kp_platform_data palmte_kp_data = {
  69         .rows   = 8,
  70         .cols   = 8,
  71         .keymap = palmte_keymap,
  72         .rep    = 1,
  73         .delay  = 12,
  74 };
  75
  76 static struct resource palmte_kp_resources[] = {
  77         [0]     = {
  78                 .start  = INT_KEYBOARD,
  79                 .end    = INT_KEYBOARD,
  80                 .flags  = IORESOURCE_IRQ,
  81         },
  82 };
  83
  84 static struct platform_device palmte_kp_device = {
  85         .name           = "omap-keypad",
  86         .id             = -1,
  87         .dev            = {
  88                 .platform_data  = &palmte_kp_data,
  89         },
  90         .num_resources  = ARRAY_SIZE(palmte_kp_resources),
  91         .resource       = palmte_kp_resources,
  92 };
  93
  94 static struct mtd_partition palmte_rom_partitions[] = {
  95         /* PalmOS "Small ROM", contains the bootloader and the debugger */
  96         {
  97                 .name           = "smallrom",
  98                 .offset         = 0,
  99                 .size           = 0xa000,
 100                 .mask_flags     = MTD_WRITEABLE,
 101         },
 102         /* PalmOS "Big ROM", a filesystem with all the OS code and data */
 103         {
 104                 .name           = "bigrom",
 105                 .offset         = SZ_128K,
 106                 /*
 107                  * 0x5f0000 bytes big in the multi-language ("EFIGS") version,
 108                  * 0x7b0000 bytes in the English-only ("enUS") version.
 109                  */
 110                 .size           = 0x7b0000,
 111                 .mask_flags     = MTD_WRITEABLE,
 112         },
 113 };
 114
 115 static struct flash_platform_data palmte_rom_data = {
 116         .map_name       = "map_rom",
 117         .width          = 2,
 118         .parts          = palmte_rom_partitions,
 119         .nr_parts       = ARRAY_SIZE(palmte_rom_partitions),
 120 };
 121
 122 static struct resource palmte_rom_resource = {
 123         .start          = OMAP_CS0_PHYS,
 124         .end            = OMAP_CS0_PHYS + SZ_8M - 1,
 125         .flags          = IORESOURCE_MEM,
 126 };
 127
 128 static struct platform_device palmte_rom_device = {
 129         .name           = "omapflash",
 130         .id             = -1,
 131         .dev            = {
 132                 .platform_data  = &palmte_rom_data,
 133         },
 134         .num_resources  = 1,
 135         .resource       = &palmte_rom_resource,
 136 };
 137
 138 static struct platform_device palmte_lcd_device = {
 139         .name           = "lcd_palmte",
 140         .id             = -1,
 141 };
 142
 143 static struct omap_backlight_config palmte_backlight_config = {
 144         .default_intensity      = 0xa0,
 145 };
 146
 147 static struct platform_device palmte_backlight_device = {
 148         .name           = "omap-bl",
 149         .id             = -1,
 150         .dev            = {
 151                 .platform_data  = &palmte_backlight_config,
 152         },
 153 };
 154
 155 static struct omap_irda_config palmte_irda_config = {
 156         .transceiver_cap        = IR_SIRMODE,
 157         .rx_channel             = OMAP_DMA_UART3_RX,
 158         .tx_channel             = OMAP_DMA_UART3_TX,
 159         .dest_start             = UART3_THR,
 160         .src_start              = UART3_RHR,
 161         .tx_trigger             = 0,
 162         .rx_trigger             = 0,
 163 };
 164
 165 static struct resource palmte_irda_resources[] = {
 166         [0]     = {
 167                 .start  = INT_UART3,
 168                 .end    = INT_UART3,
 169                 .flags  = IORESOURCE_IRQ,
 170         },
 171 };
 172
 173 static struct platform_device palmte_irda_device = {
 174         .name           = "omapirda",
 175         .id             = -1,
 176         .dev            = {
 177                 .platform_data  = &palmte_irda_config,
 178         },
 179         .num_resources  = ARRAY_SIZE(palmte_irda_resources),
 180         .resource       = palmte_irda_resources,
 181 };
 182
 183 static struct platform_device *devices[] __initdata = {
 184         &palmte_rom_device,
 185         &palmte_kp_device,
 186         &palmte_lcd_device,
 187         &palmte_backlight_device,
 188         &palmte_irda_device,
 189 };
 190
 191 static struct omap_usb_config palmte_usb_config __initdata = {
 192         .register_dev   = 1,    /* Mini-B only receptacle */
 193         .hmc_mode       = 0,
 194         .pins[0]        = 2,
 195 };
 196
 197 static struct omap_mmc_config palmte_mmc_config __initdata = {
 198         .mmc[0]         = {
 199                 .enabled        = 1,
 200                 .wp_pin         = PALMTE_MMC_WP_GPIO,
 201                 .power_pin      = PALMTE_MMC_POWER_GPIO,
 202                 .switch_pin     = PALMTE_MMC_SWITCH_GPIO,
 203         },
 204 };
 205
 206 static struct omap_lcd_config palmte_lcd_config __initdata = {
 207         .ctrl_name      = "internal",
 208 };
 209
 210 static struct omap_uart_config palmte_uart_config __initdata = {
 211         .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
 212 };
 213
 214 static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = {
 215         .spcr2  = FRST | GRST | XRST | XINTM(3),
 216         .xcr2   = XDATDLY(1) | XFIG,
 217         .xcr1   = XWDLEN1(OMAP_MCBSP_WORD_32),
 218         .pcr0   = SCLKME | FSXP | CLKXP,
 219 };
 220
 221 static struct omap_alsa_codec_config palmte_alsa_config = {
 222         .name                   = "TSC2102 audio",
 223         .mcbsp_regs_alsa        = &palmte_mcbsp1_regs,
 224         .codec_configure_dev    = NULL, /* tsc2102_configure, */
 225         .codec_set_samplerate   = NULL, /* tsc2102_set_samplerate, */
 226         .codec_clock_setup      = NULL, /* tsc2102_clock_setup, */
 227         .codec_clock_on         = NULL, /* tsc2102_clock_on, */
 228         .codec_clock_off        = NULL, /* tsc2102_clock_off, */
 229         .get_default_samplerate = NULL, /* tsc2102_get_default_samplerate, */
 230 };
 231
 232 #ifdef CONFIG_APM
 233 /*
 234  * Values measured in 10 minute intervals averaged over 10 samples.
 235  * May differ slightly from device to device but should be accurate
 236  * enough to give basic idea of battery life left and trigger
 237  * potential alerts.
 238  */
 239 static const int palmte_battery_sample[] = {
 240         2194, 2157, 2138, 2120,
 241         2104, 2089, 2075, 2061,
 242         2048, 2038, 2026, 2016,
 243         2008, 1998, 1989, 1980,
 244         1970, 1958, 1945, 1928,
 245         1910, 1888, 1860, 1827,
 246         1791, 1751, 1709, 1656,
 247 };
 248
 249 #define INTERVAL                10
 250 #define BATTERY_HIGH_TRESHOLD   66
 251 #define BATTERY_LOW_TRESHOLD    33
 252
 253 static void palmte_get_power_status(struct apm_power_info *info, int *battery)
 254 {
 255         int charging, batt, hi, lo, mid;
 256
 257         charging = !omap_get_gpio_datain(PALMTE_DC_GPIO);
 258         batt = battery[0];
 259         if (charging)
 260                 batt -= 60;
 261
 262         hi = ARRAY_SIZE(palmte_battery_sample);
 263         lo = 0;
 264
 265         info->battery_flag = 0;
 266         info->units = APM_UNITS_MINS;
 267
 268         if (batt > palmte_battery_sample[lo]) {
 269                 info->battery_life = 100;
 270                 info->time = INTERVAL * ARRAY_SIZE(palmte_battery_sample);
 271         } else if (batt <= palmte_battery_sample[hi - 1]) {
 272                 info->battery_life = 0;
 273                 info->time = 0;
 274         } else {
 275                 while (hi > lo + 1) {
 276                         mid = (hi + lo) >> 2;
 277                         if (batt <= palmte_battery_sample[mid])
 278                                 lo = mid;
 279                         else
 280                                 hi = mid;
 281                 }
 282
 283                 mid = palmte_battery_sample[lo] - palmte_battery_sample[hi];
 284                 hi = palmte_battery_sample[lo] - batt;
 285                 info->battery_life = 100 - (100 * lo + 100 * hi / mid) /
 286                         ARRAY_SIZE(palmte_battery_sample);
 287                 info->time = INTERVAL * (ARRAY_SIZE(palmte_battery_sample) -
 288                                 lo) - INTERVAL * hi / mid;
 289         }
 290
 291         if (charging) {
 292                 info->ac_line_status = APM_AC_ONLINE;
 293                 info->battery_status = APM_BATTERY_STATUS_CHARGING;
 294                 info->battery_flag |= APM_BATTERY_FLAG_CHARGING;
 295         } else {
 296                 info->ac_line_status = APM_AC_OFFLINE;
 297                 if (info->battery_life > BATTERY_HIGH_TRESHOLD)
 298                         info->battery_status = APM_BATTERY_STATUS_HIGH;
 299                 else if (info->battery_life > BATTERY_LOW_TRESHOLD)
 300                         info->battery_status = APM_BATTERY_STATUS_LOW;
 301                 else
 302                         info->battery_status = APM_BATTERY_STATUS_CRITICAL;
 303         }
 304
 305         if (info->battery_life > BATTERY_HIGH_TRESHOLD)
 306                 info->battery_flag |= APM_BATTERY_FLAG_HIGH;
 307         else if (info->battery_life > BATTERY_LOW_TRESHOLD)
 308                 info->battery_flag |= APM_BATTERY_FLAG_LOW;
 309         else
 310                 info->battery_flag |= APM_BATTERY_FLAG_CRITICAL;
 311 }
 312 #else
 313 #define palmte_get_power_status NULL
 314 #endif
 315
 316 static struct tsc2102_config palmte_tsc2102_config = {
 317         .use_internal   = 0,
 318         .monitor        = TSC_BAT1 | TSC_AUX | TSC_TEMP,
 319         .temp_at25c     = { 2200, 2615 },
 320         .apm_report     = palmte_get_power_status,
 321         .alsa_config    = &palmte_alsa_config,
 322 };
 323
 324 static struct omap_board_config_kernel palmte_config[] = {
 325         { OMAP_TAG_USB,         &palmte_usb_config },
 326         { OMAP_TAG_MMC,         &palmte_mmc_config },
 327         { OMAP_TAG_LCD,         &palmte_lcd_config },
 328         { OMAP_TAG_UART,        &palmte_uart_config },
 329 };
 330
 331 static struct spi_board_info palmte_spi_info[] __initdata = {
 332         {
 333                 .modalias       = "tsc2102",
 334                 .bus_num        = 2,    /* uWire (officially) */
 335                 .chip_select    = 0,    /* As opposed to 3 */
 336                 .irq            = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
 337                 .platform_data  = &palmte_tsc2102_config,
 338                 .max_speed_hz   = 8000000,
 339         },
 340 };
 341
 342 /* Periodically check for changes on important input pins */
 343 struct timer_list palmte_pin_timer;
 344 int prev_power, prev_headphones;
 345
 346 static void palmte_pin_handler(unsigned long data) {
 347         int power, headphones;
 348
 349         power = !omap_get_gpio_datain(PALMTE_DC_GPIO);
 350         headphones = omap_get_gpio_datain(PALMTE_HEADPHONES_GPIO);
 351
 352         if (power && !prev_power)
 353                 printk(KERN_INFO "PM: cable connected\n");
 354         else if (!power && prev_power)
 355                 printk(KERN_INFO "PM: cable disconnected\n");
 356
 357         if (headphones && !prev_headphones) {
 358                 /* Headphones connected, disable speaker */
 359                 omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 0);
 360                 printk(KERN_INFO "PM: speaker off\n");
 361         } else if (!headphones && prev_headphones) {
 362                 /* Headphones unplugged, re-enable speaker */
 363                 omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 1);
 364                 printk(KERN_INFO "PM: speaker on\n");
 365         }
 366
 367         prev_power = power;
 368         prev_headphones = headphones;
 369         mod_timer(&palmte_pin_timer, jiffies + msecs_to_jiffies(500));
 370 }
 371
 372 static void __init palmte_gpio_setup(void)
 373 {
 374         /* Set TSC2102 PINTDAV pin as input */
 375         if (omap_request_gpio(PALMTE_PINTDAV_GPIO)) {
 376                 printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n");
 377                 return;
 378         }
 379         omap_set_gpio_direction(PALMTE_PINTDAV_GPIO, 1);
 380
 381         /* Monitor cable-connected signals */
 382         if (omap_request_gpio(PALMTE_DC_GPIO) ||
 383                         omap_request_gpio(PALMTE_USB_OR_DC_GPIO) ||
 384                         omap_request_gpio(PALMTE_USBDETECT_GPIO)) {
 385                 printk(KERN_ERR "Could not reserve cable signal GPIO!\n");
 386                 return;
 387         }
 388         omap_set_gpio_direction(PALMTE_DC_GPIO, 1);
 389         omap_set_gpio_direction(PALMTE_USB_OR_DC_GPIO, 1);
 390         omap_set_gpio_direction(PALMTE_USBDETECT_GPIO, 1);
 391
 392         /* Set speaker-enable pin as output */
 393         if (omap_request_gpio(PALMTE_SPEAKER_GPIO)) {
 394                 printk(KERN_ERR "Could not reserve speaker GPIO!\n");
 395                 return;
 396         }
 397         omap_set_gpio_direction(PALMTE_SPEAKER_GPIO, 0);
 398
 399         /* Monitor the headphones-connected signal */
 400         if (omap_request_gpio(PALMTE_HEADPHONES_GPIO)) {
 401                 printk(KERN_ERR "Could not reserve headphones signal GPIO!\n");
 402                 return;
 403         }
 404         omap_set_gpio_direction(PALMTE_HEADPHONES_GPIO, 1);
 405
 406         prev_power = omap_get_gpio_datain(PALMTE_DC_GPIO);
 407         prev_headphones = !omap_get_gpio_datain(PALMTE_HEADPHONES_GPIO);
 408         setup_timer(&palmte_pin_timer, palmte_pin_handler, 0);
 409         palmte_pin_handler(0);
 410 }
 411
 412 static void __init omap_palmte_init(void)
 413 {
 414         omap_board_config = palmte_config;
 415         omap_board_config_size = ARRAY_SIZE(palmte_config);
 416
 417         platform_add_devices(devices, ARRAY_SIZE(devices));
 418
 419         spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
 420
 421         omap_serial_init();
 422         omap_register_i2c_bus(1, 100, NULL, 0);
 423         palmte_gpio_setup();
 424 }
 425
 426 static void __init omap_palmte_map_io(void)
 427 {
 428         omap1_map_common_io();
 429 }
 430
 431 MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 432         .phys_io        = 0xfff00000,
 433         .io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
 434         .boot_params    = 0x10000100,
 435         .map_io         = omap_palmte_map_io,
 436         .init_irq       = omap_palmte_init_irq,
 437         .init_machine   = omap_palmte_init,
 438         .timer          = &omap_timer,
 439 MACHINE_END