2 * linux/arch/arm/mach-at91rm9200/board-kb9202.c
4 * Copyright (c) 2005 kb_admin
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 #include <linux/config.h>
23 #include <linux/types.h>
24 #include <linux/init.h>
26 #include <linux/module.h>
27 #include <linux/platform_device.h>
29 #include <asm/hardware.h>
30 #include <asm/setup.h>
31 #include <asm/mach-types.h>
34 #include <asm/mach/arch.h>
35 #include <asm/mach/map.h>
36 #include <asm/mach/irq.h>
38 #include <asm/arch/board.h>
39 #include <asm/arch/gpio.h>
43 static void __init kb9202_init_irq(void)
45 /* Initialize AIC controller */
46 at91rm9200_init_irq(NULL);
48 /* Set up the GPIO interrupts */
49 at91_gpio_irq_setup(PQFP_GPIO_BANKS);
53 * Serial port configuration.
54 * 0 .. 3 = USART0 .. USART3
57 static struct at91_uart_config __initdata kb9202_uart_config = {
58 .console_tty = 0, /* ttyS0 */
60 .tty_map = { 4, 0, 1, -1, -1 } /* ttyS0, ..., ttyS4 */
63 static void __init kb9202_map_io(void)
65 /* Initialize processor: 10 MHz crystal */
66 at91rm9200_initialize(10000000);
69 at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
71 /* Setup the serial ports and console */
72 at91_init_serial(&kb9202_uart_config);
75 static struct at91_eth_data __initdata kb9202_eth_data = {
76 .phy_irq_pin = AT91_PIN_PB29,
80 static struct at91_usbh_data __initdata kb9202_usbh_data = {
84 static struct at91_udc_data __initdata kb9202_udc_data = {
85 .vbus_pin = AT91_PIN_PB24,
86 .pullup_pin = AT91_PIN_PB22,
89 static struct at91_mmc_data __initdata kb9202_mmc_data = {
90 .det_pin = AT91_PIN_PB2,
95 static void __init kb9202_board_init(void)
98 at91_add_device_serial();
100 at91_add_device_eth(&kb9202_eth_data);
102 at91_add_device_usbh(&kb9202_usbh_data);
104 at91_add_device_udc(&kb9202_udc_data);
106 at91_add_device_mmc(&kb9202_mmc_data);
108 at91_add_device_i2c();
110 at91_add_device_spi(NULL, 0);
113 MACHINE_START(KB9200, "KB920x")
114 /* Maintainer: KwikByte, Inc. */
115 .phys_io = AT91_BASE_SYS,
116 .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
117 .boot_params = AT91_SDRAM_BASE + 0x100,
118 .timer = &at91rm9200_timer,
119 .map_io = kb9202_map_io,
120 .init_irq = kb9202_init_irq,
121 .init_machine = kb9202_board_init,