]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - arch/arm/mach-at91/at91sam9261.c
Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-nommu
[linux-2.6-omap-h63xx.git] / arch / arm / mach-at91 / at91sam9261.c
1 /*
2  * arch/arm/mach-at91/at91sam9261.c
3  *
4  *  Copyright (C) 2005 SAN People
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  *
11  */
12
13 #include <linux/module.h>
14 #include <linux/pm.h>
15
16 #include <asm/irq.h>
17 #include <asm/mach/arch.h>
18 #include <asm/mach/map.h>
19 #include <mach/at91sam9261.h>
20 #include <mach/at91_pmc.h>
21 #include <mach/at91_rstc.h>
22 #include <mach/at91_shdwc.h>
23
24 #include "generic.h"
25 #include "clock.h"
26
27 static struct map_desc at91sam9261_io_desc[] __initdata = {
28         {
29                 .virtual        = AT91_VA_BASE_SYS,
30                 .pfn            = __phys_to_pfn(AT91_BASE_SYS),
31                 .length         = SZ_16K,
32                 .type           = MT_DEVICE,
33         }, {
34                 .virtual        = AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
35                 .pfn            = __phys_to_pfn(AT91SAM9261_SRAM_BASE),
36                 .length         = AT91SAM9261_SRAM_SIZE,
37                 .type           = MT_DEVICE,
38         },
39 };
40
41 /* --------------------------------------------------------------------
42  *  Clocks
43  * -------------------------------------------------------------------- */
44
45 /*
46  * The peripheral clocks.
47  */
48 static struct clk pioA_clk = {
49         .name           = "pioA_clk",
50         .pmc_mask       = 1 << AT91SAM9261_ID_PIOA,
51         .type           = CLK_TYPE_PERIPHERAL,
52 };
53 static struct clk pioB_clk = {
54         .name           = "pioB_clk",
55         .pmc_mask       = 1 << AT91SAM9261_ID_PIOB,
56         .type           = CLK_TYPE_PERIPHERAL,
57 };
58 static struct clk pioC_clk = {
59         .name           = "pioC_clk",
60         .pmc_mask       = 1 << AT91SAM9261_ID_PIOC,
61         .type           = CLK_TYPE_PERIPHERAL,
62 };
63 static struct clk usart0_clk = {
64         .name           = "usart0_clk",
65         .pmc_mask       = 1 << AT91SAM9261_ID_US0,
66         .type           = CLK_TYPE_PERIPHERAL,
67 };
68 static struct clk usart1_clk = {
69         .name           = "usart1_clk",
70         .pmc_mask       = 1 << AT91SAM9261_ID_US1,
71         .type           = CLK_TYPE_PERIPHERAL,
72 };
73 static struct clk usart2_clk = {
74         .name           = "usart2_clk",
75         .pmc_mask       = 1 << AT91SAM9261_ID_US2,
76         .type           = CLK_TYPE_PERIPHERAL,
77 };
78 static struct clk mmc_clk = {
79         .name           = "mci_clk",
80         .pmc_mask       = 1 << AT91SAM9261_ID_MCI,
81         .type           = CLK_TYPE_PERIPHERAL,
82 };
83 static struct clk udc_clk = {
84         .name           = "udc_clk",
85         .pmc_mask       = 1 << AT91SAM9261_ID_UDP,
86         .type           = CLK_TYPE_PERIPHERAL,
87 };
88 static struct clk twi_clk = {
89         .name           = "twi_clk",
90         .pmc_mask       = 1 << AT91SAM9261_ID_TWI,
91         .type           = CLK_TYPE_PERIPHERAL,
92 };
93 static struct clk spi0_clk = {
94         .name           = "spi0_clk",
95         .pmc_mask       = 1 << AT91SAM9261_ID_SPI0,
96         .type           = CLK_TYPE_PERIPHERAL,
97 };
98 static struct clk spi1_clk = {
99         .name           = "spi1_clk",
100         .pmc_mask       = 1 << AT91SAM9261_ID_SPI1,
101         .type           = CLK_TYPE_PERIPHERAL,
102 };
103 static struct clk ssc0_clk = {
104         .name           = "ssc0_clk",
105         .pmc_mask       = 1 << AT91SAM9261_ID_SSC0,
106         .type           = CLK_TYPE_PERIPHERAL,
107 };
108 static struct clk ssc1_clk = {
109         .name           = "ssc1_clk",
110         .pmc_mask       = 1 << AT91SAM9261_ID_SSC1,
111         .type           = CLK_TYPE_PERIPHERAL,
112 };
113 static struct clk ssc2_clk = {
114         .name           = "ssc2_clk",
115         .pmc_mask       = 1 << AT91SAM9261_ID_SSC2,
116         .type           = CLK_TYPE_PERIPHERAL,
117 };
118 static struct clk tc0_clk = {
119         .name           = "tc0_clk",
120         .pmc_mask       = 1 << AT91SAM9261_ID_TC0,
121         .type           = CLK_TYPE_PERIPHERAL,
122 };
123 static struct clk tc1_clk = {
124         .name           = "tc1_clk",
125         .pmc_mask       = 1 << AT91SAM9261_ID_TC1,
126         .type           = CLK_TYPE_PERIPHERAL,
127 };
128 static struct clk tc2_clk = {
129         .name           = "tc2_clk",
130         .pmc_mask       = 1 << AT91SAM9261_ID_TC2,
131         .type           = CLK_TYPE_PERIPHERAL,
132 };
133 static struct clk ohci_clk = {
134         .name           = "ohci_clk",
135         .pmc_mask       = 1 << AT91SAM9261_ID_UHP,
136         .type           = CLK_TYPE_PERIPHERAL,
137 };
138 static struct clk lcdc_clk = {
139         .name           = "lcdc_clk",
140         .pmc_mask       = 1 << AT91SAM9261_ID_LCDC,
141         .type           = CLK_TYPE_PERIPHERAL,
142 };
143
144 static struct clk *periph_clocks[] __initdata = {
145         &pioA_clk,
146         &pioB_clk,
147         &pioC_clk,
148         &usart0_clk,
149         &usart1_clk,
150         &usart2_clk,
151         &mmc_clk,
152         &udc_clk,
153         &twi_clk,
154         &spi0_clk,
155         &spi1_clk,
156         &ssc0_clk,
157         &ssc1_clk,
158         &ssc2_clk,
159         &tc0_clk,
160         &tc1_clk,
161         &tc2_clk,
162         &ohci_clk,
163         &lcdc_clk,
164         // irq0 .. irq2
165 };
166
167 /*
168  * The four programmable clocks.
169  * You must configure pin multiplexing to bring these signals out.
170  */
171 static struct clk pck0 = {
172         .name           = "pck0",
173         .pmc_mask       = AT91_PMC_PCK0,
174         .type           = CLK_TYPE_PROGRAMMABLE,
175         .id             = 0,
176 };
177 static struct clk pck1 = {
178         .name           = "pck1",
179         .pmc_mask       = AT91_PMC_PCK1,
180         .type           = CLK_TYPE_PROGRAMMABLE,
181         .id             = 1,
182 };
183 static struct clk pck2 = {
184         .name           = "pck2",
185         .pmc_mask       = AT91_PMC_PCK2,
186         .type           = CLK_TYPE_PROGRAMMABLE,
187         .id             = 2,
188 };
189 static struct clk pck3 = {
190         .name           = "pck3",
191         .pmc_mask       = AT91_PMC_PCK3,
192         .type           = CLK_TYPE_PROGRAMMABLE,
193         .id             = 3,
194 };
195
196 /* HClocks */
197 static struct clk hck0 = {
198         .name           = "hck0",
199         .pmc_mask       = AT91_PMC_HCK0,
200         .type           = CLK_TYPE_SYSTEM,
201         .id             = 0,
202 };
203 static struct clk hck1 = {
204         .name           = "hck1",
205         .pmc_mask       = AT91_PMC_HCK1,
206         .type           = CLK_TYPE_SYSTEM,
207         .id             = 1,
208 };
209
210 static void __init at91sam9261_register_clocks(void)
211 {
212         int i;
213
214         for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
215                 clk_register(periph_clocks[i]);
216
217         clk_register(&pck0);
218         clk_register(&pck1);
219         clk_register(&pck2);
220         clk_register(&pck3);
221
222         clk_register(&hck0);
223         clk_register(&hck1);
224 }
225
226 /* --------------------------------------------------------------------
227  *  GPIO
228  * -------------------------------------------------------------------- */
229
230 static struct at91_gpio_bank at91sam9261_gpio[] = {
231         {
232                 .id             = AT91SAM9261_ID_PIOA,
233                 .offset         = AT91_PIOA,
234                 .clock          = &pioA_clk,
235         }, {
236                 .id             = AT91SAM9261_ID_PIOB,
237                 .offset         = AT91_PIOB,
238                 .clock          = &pioB_clk,
239         }, {
240                 .id             = AT91SAM9261_ID_PIOC,
241                 .offset         = AT91_PIOC,
242                 .clock          = &pioC_clk,
243         }
244 };
245
246 static void at91sam9261_reset(void)
247 {
248         at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
249 }
250
251 static void at91sam9261_poweroff(void)
252 {
253         at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
254 }
255
256
257 /* --------------------------------------------------------------------
258  *  AT91SAM9261 processor initialization
259  * -------------------------------------------------------------------- */
260
261 void __init at91sam9261_initialize(unsigned long main_clock)
262 {
263         /* Map peripherals */
264         iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
265
266         at91_arch_reset = at91sam9261_reset;
267         pm_power_off = at91sam9261_poweroff;
268         at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
269                         | (1 << AT91SAM9261_ID_IRQ2);
270
271         /* Init clock subsystem */
272         at91_clock_init(main_clock);
273
274         /* Register the processor-specific clocks */
275         at91sam9261_register_clocks();
276
277         /* Register GPIO subsystem */
278         at91_gpio_init(at91sam9261_gpio, 3);
279 }
280
281 /* --------------------------------------------------------------------
282  *  Interrupt initialization
283  * -------------------------------------------------------------------- */
284
285 /*
286  * The default interrupt priority levels (0 = lowest, 7 = highest).
287  */
288 static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
289         7,      /* Advanced Interrupt Controller */
290         7,      /* System Peripherals */
291         1,      /* Parallel IO Controller A */
292         1,      /* Parallel IO Controller B */
293         1,      /* Parallel IO Controller C */
294         0,
295         5,      /* USART 0 */
296         5,      /* USART 1 */
297         5,      /* USART 2 */
298         0,      /* Multimedia Card Interface */
299         2,      /* USB Device Port */
300         6,      /* Two-Wire Interface */
301         5,      /* Serial Peripheral Interface 0 */
302         5,      /* Serial Peripheral Interface 1 */
303         4,      /* Serial Synchronous Controller 0 */
304         4,      /* Serial Synchronous Controller 1 */
305         4,      /* Serial Synchronous Controller 2 */
306         0,      /* Timer Counter 0 */
307         0,      /* Timer Counter 1 */
308         0,      /* Timer Counter 2 */
309         2,      /* USB Host port */
310         3,      /* LCD Controller */
311         0,
312         0,
313         0,
314         0,
315         0,
316         0,
317         0,
318         0,      /* Advanced Interrupt Controller */
319         0,      /* Advanced Interrupt Controller */
320         0,      /* Advanced Interrupt Controller */
321 };
322
323 void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS])
324 {
325         if (!priority)
326                 priority = at91sam9261_default_irq_priority;
327
328         /* Initialize the AIC interrupt controller */
329         at91_aic_init(priority);
330
331         /* Enable GPIO interrupts */
332         at91_gpio_irq_setup();
333 }