]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - arch/arm/include/asm/dma-mapping.h
eff954852c2bf12f6ddfbcdcdfea4dbd8c1e9478
[linux-2.6-omap-h63xx.git] / arch / arm / include / asm / dma-mapping.h
1 #ifndef ASMARM_DMA_MAPPING_H
2 #define ASMARM_DMA_MAPPING_H
3
4 #ifdef __KERNEL__
5
6 #include <linux/mm_types.h>
7 #include <linux/scatterlist.h>
8
9 #include <asm-generic/dma-coherent.h>
10 #include <asm/memory.h>
11
12 /*
13  * page_to_dma/dma_to_virt/virt_to_dma are architecture private functions
14  * used internally by the DMA-mapping API to provide DMA addresses. They
15  * must not be used by drivers.
16  */
17 #ifndef __arch_page_to_dma
18 static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
19 {
20         return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page));
21 }
22
23 static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
24 {
25         return (void *)__bus_to_virt(addr);
26 }
27
28 static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
29 {
30         return (dma_addr_t)__virt_to_bus((unsigned long)(addr));
31 }
32 #else
33 static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
34 {
35         return __arch_page_to_dma(dev, page);
36 }
37
38 static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
39 {
40         return __arch_dma_to_virt(dev, addr);
41 }
42
43 static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
44 {
45         return __arch_virt_to_dma(dev, addr);
46 }
47 #endif
48
49 /*
50  * DMA-consistent mapping functions.  These allocate/free a region of
51  * uncached, unwrite-buffered mapped memory space for use with DMA
52  * devices.  This is the "generic" version.  The PCI specific version
53  * is in pci.h
54  *
55  * Note: Drivers should NOT use this function directly, as it will break
56  * platforms with CONFIG_DMABOUNCE.
57  * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
58  */
59 extern void dma_cache_maint(const void *kaddr, size_t size, int rw);
60
61 /*
62  * Return whether the given device DMA address mask can be supported
63  * properly.  For example, if your device can only drive the low 24-bits
64  * during bus mastering, then you would pass 0x00ffffff as the mask
65  * to this function.
66  *
67  * FIXME: This should really be a platform specific issue - we should
68  * return false if GFP_DMA allocations may not satisfy the supplied 'mask'.
69  */
70 static inline int dma_supported(struct device *dev, u64 mask)
71 {
72         return dev->dma_mask && *dev->dma_mask != 0;
73 }
74
75 static inline int dma_set_mask(struct device *dev, u64 dma_mask)
76 {
77         if (!dev->dma_mask || !dma_supported(dev, dma_mask))
78                 return -EIO;
79
80         *dev->dma_mask = dma_mask;
81
82         return 0;
83 }
84
85 static inline int dma_get_cache_alignment(void)
86 {
87         return 32;
88 }
89
90 static inline int dma_is_consistent(struct device *dev, dma_addr_t handle)
91 {
92         return !!arch_is_coherent();
93 }
94
95 /*
96  * DMA errors are defined by all-bits-set in the DMA address.
97  */
98 static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
99 {
100         return dma_addr == ~0;
101 }
102
103 /*
104  * Dummy noncoherent implementation.  We don't provide a dma_cache_sync
105  * function so drivers using this API are highlighted with build warnings.
106  */
107 static inline void *
108 dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
109 {
110         return NULL;
111 }
112
113 static inline void
114 dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
115                      dma_addr_t handle)
116 {
117 }
118
119 /**
120  * dma_alloc_coherent - allocate consistent memory for DMA
121  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
122  * @size: required memory size
123  * @handle: bus-specific DMA address
124  *
125  * Allocate some uncached, unbuffered memory for a device for
126  * performing DMA.  This function allocates pages, and will
127  * return the CPU-viewed address, and sets @handle to be the
128  * device-viewed address.
129  */
130 extern void *
131 dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
132
133 /**
134  * dma_free_coherent - free memory allocated by dma_alloc_coherent
135  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
136  * @size: size of memory originally requested in dma_alloc_coherent
137  * @cpu_addr: CPU-view address returned from dma_alloc_coherent
138  * @handle: device-view address returned from dma_alloc_coherent
139  *
140  * Free (and unmap) a DMA buffer previously allocated by
141  * dma_alloc_coherent().
142  *
143  * References to memory and mappings associated with cpu_addr/handle
144  * during and after this call executing are illegal.
145  */
146 extern void
147 dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
148                   dma_addr_t handle);
149
150 /**
151  * dma_mmap_coherent - map a coherent DMA allocation into user space
152  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
153  * @vma: vm_area_struct describing requested user mapping
154  * @cpu_addr: kernel CPU-view address returned from dma_alloc_coherent
155  * @handle: device-view address returned from dma_alloc_coherent
156  * @size: size of memory originally requested in dma_alloc_coherent
157  *
158  * Map a coherent DMA buffer previously allocated by dma_alloc_coherent
159  * into user space.  The coherent DMA buffer must not be freed by the
160  * driver until the user space mapping has been released.
161  */
162 int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
163                       void *cpu_addr, dma_addr_t handle, size_t size);
164
165
166 /**
167  * dma_alloc_writecombine - allocate writecombining memory for DMA
168  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
169  * @size: required memory size
170  * @handle: bus-specific DMA address
171  *
172  * Allocate some uncached, buffered memory for a device for
173  * performing DMA.  This function allocates pages, and will
174  * return the CPU-viewed address, and sets @handle to be the
175  * device-viewed address.
176  */
177 extern void *
178 dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
179
180 #define dma_free_writecombine(dev,size,cpu_addr,handle) \
181         dma_free_coherent(dev,size,cpu_addr,handle)
182
183 int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
184                           void *cpu_addr, dma_addr_t handle, size_t size);
185
186
187 /**
188  * dma_map_single - map a single buffer for streaming DMA
189  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
190  * @cpu_addr: CPU direct mapped address of buffer
191  * @size: size of buffer to map
192  * @dir: DMA transfer direction
193  *
194  * Ensure that any data held in the cache is appropriately discarded
195  * or written back.
196  *
197  * The device owns this memory once this call has completed.  The CPU
198  * can regain ownership by calling dma_unmap_single() or
199  * dma_sync_single_for_cpu().
200  */
201 #ifndef CONFIG_DMABOUNCE
202 static inline dma_addr_t
203 dma_map_single(struct device *dev, void *cpu_addr, size_t size,
204                enum dma_data_direction dir)
205 {
206         if (!arch_is_coherent())
207                 dma_cache_maint(cpu_addr, size, dir);
208
209         return virt_to_dma(dev, cpu_addr);
210 }
211 #else
212 extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_direction);
213 #endif
214
215 /**
216  * dma_map_page - map a portion of a page for streaming DMA
217  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
218  * @page: page that buffer resides in
219  * @offset: offset into page for start of buffer
220  * @size: size of buffer to map
221  * @dir: DMA transfer direction
222  *
223  * Ensure that any data held in the cache is appropriately discarded
224  * or written back.
225  *
226  * The device owns this memory once this call has completed.  The CPU
227  * can regain ownership by calling dma_unmap_page() or
228  * dma_sync_single_for_cpu().
229  */
230 static inline dma_addr_t
231 dma_map_page(struct device *dev, struct page *page,
232              unsigned long offset, size_t size,
233              enum dma_data_direction dir)
234 {
235         return dma_map_single(dev, page_address(page) + offset, size, dir);
236 }
237
238 /**
239  * dma_unmap_single - unmap a single buffer previously mapped
240  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
241  * @handle: DMA address of buffer
242  * @size: size of buffer to map
243  * @dir: DMA transfer direction
244  *
245  * Unmap a single streaming mode DMA translation.  The handle and size
246  * must match what was provided in the previous dma_map_single() call.
247  * All other usages are undefined.
248  *
249  * After this call, reads by the CPU to the buffer are guaranteed to see
250  * whatever the device wrote there.
251  */
252 #ifndef CONFIG_DMABOUNCE
253 static inline void
254 dma_unmap_single(struct device *dev, dma_addr_t handle, size_t size,
255                  enum dma_data_direction dir)
256 {
257         /* nothing to do */
258 }
259 #else
260 extern void dma_unmap_single(struct device *, dma_addr_t, size_t, enum dma_data_direction);
261 #endif
262
263 /**
264  * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
265  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
266  * @handle: DMA address of buffer
267  * @size: size of buffer to map
268  * @dir: DMA transfer direction
269  *
270  * Unmap a single streaming mode DMA translation.  The handle and size
271  * must match what was provided in the previous dma_map_single() call.
272  * All other usages are undefined.
273  *
274  * After this call, reads by the CPU to the buffer are guaranteed to see
275  * whatever the device wrote there.
276  */
277 static inline void
278 dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size,
279                enum dma_data_direction dir)
280 {
281         dma_unmap_single(dev, handle, size, dir);
282 }
283
284 /**
285  * dma_sync_single_range_for_cpu
286  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
287  * @handle: DMA address of buffer
288  * @offset: offset of region to start sync
289  * @size: size of region to sync
290  * @dir: DMA transfer direction (same as passed to dma_map_single)
291  *
292  * Make physical memory consistent for a single streaming mode DMA
293  * translation after a transfer.
294  *
295  * If you perform a dma_map_single() but wish to interrogate the
296  * buffer using the cpu, yet do not wish to teardown the PCI dma
297  * mapping, you must call this function before doing so.  At the
298  * next point you give the PCI dma address back to the card, you
299  * must first the perform a dma_sync_for_device, and then the
300  * device again owns the buffer.
301  */
302 #ifndef CONFIG_DMABOUNCE
303 static inline void
304 dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t handle,
305                               unsigned long offset, size_t size,
306                               enum dma_data_direction dir)
307 {
308         if (!arch_is_coherent())
309                 dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
310 }
311
312 static inline void
313 dma_sync_single_range_for_device(struct device *dev, dma_addr_t handle,
314                                  unsigned long offset, size_t size,
315                                  enum dma_data_direction dir)
316 {
317         if (!arch_is_coherent())
318                 dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
319 }
320 #else
321 extern void dma_sync_single_range_for_cpu(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction);
322 extern void dma_sync_single_range_for_device(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction);
323 #endif
324
325 static inline void
326 dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
327                         enum dma_data_direction dir)
328 {
329         dma_sync_single_range_for_cpu(dev, handle, 0, size, dir);
330 }
331
332 static inline void
333 dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
334                            enum dma_data_direction dir)
335 {
336         dma_sync_single_range_for_device(dev, handle, 0, size, dir);
337 }
338
339 /*
340  * The scatter list versions of the above methods.
341  */
342 extern int dma_map_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
343 extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
344 extern void dma_sync_sg_for_cpu(struct device*, struct scatterlist*, int, enum dma_data_direction);
345 extern void dma_sync_sg_for_device(struct device*, struct scatterlist*, int, enum dma_data_direction);
346
347
348 #ifdef CONFIG_DMABOUNCE
349 /*
350  * For SA-1111, IXP425, and ADI systems  the dma-mapping functions are "magic"
351  * and utilize bounce buffers as needed to work around limited DMA windows.
352  *
353  * On the SA-1111, a bug limits DMA to only certain regions of RAM.
354  * On the IXP425, the PCI inbound window is 64MB (256MB total RAM)
355  * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM)
356  *
357  * The following are helper functions used by the dmabounce subystem
358  *
359  */
360
361 /**
362  * dmabounce_register_dev
363  *
364  * @dev: valid struct device pointer
365  * @small_buf_size: size of buffers to use with small buffer pool
366  * @large_buf_size: size of buffers to use with large buffer pool (can be 0)
367  *
368  * This function should be called by low-level platform code to register
369  * a device as requireing DMA buffer bouncing. The function will allocate
370  * appropriate DMA pools for the device.
371  *
372  */
373 extern int dmabounce_register_dev(struct device *, unsigned long, unsigned long);
374
375 /**
376  * dmabounce_unregister_dev
377  *
378  * @dev: valid struct device pointer
379  *
380  * This function should be called by low-level platform code when device
381  * that was previously registered with dmabounce_register_dev is removed
382  * from the system.
383  *
384  */
385 extern void dmabounce_unregister_dev(struct device *);
386
387 /**
388  * dma_needs_bounce
389  *
390  * @dev: valid struct device pointer
391  * @dma_handle: dma_handle of unbounced buffer
392  * @size: size of region being mapped
393  *
394  * Platforms that utilize the dmabounce mechanism must implement
395  * this function.
396  *
397  * The dmabounce routines call this function whenever a dma-mapping
398  * is requested to determine whether a given buffer needs to be bounced
399  * or not. The function must return 0 if the buffer is OK for
400  * DMA access and 1 if the buffer needs to be bounced.
401  *
402  */
403 extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
404 #endif /* CONFIG_DMABOUNCE */
405
406 #endif /* __KERNEL__ */
407 #endif