2 Advanced Linux Sound Architecture - Driver
3 ==========================================
10 To enable ALSA support you need at least to build the kernel with
11 primary sound card support (CONFIG_SOUND). Since ALSA can emulate OSS,
12 you don't have to choose any of the OSS modules.
14 Enable "OSS API emulation" (CONFIG_SND_OSSEMUL) and both OSS mixer and
15 PCM supports if you want to run OSS applications with ALSA.
17 If you want to support the WaveTable functionality on cards such as
18 SB Live! then you need to enable "Sequencer support"
19 (CONFIG_SND_SEQUENCER).
21 To make ALSA debug messages more verbose, enable the "Verbose printk"
22 and "Debug" options. To check for memory leaks, turn on "Debug memory"
23 too. "Debug detection" will add checks for the detection of cards.
25 Please note that all the ALSA ISA drivers support the Linux isapnp API
26 (if the card supports ISA PnP). You don't need to configure the cards
33 This depends on your distribution, but normally you use the /dev/MAKEDEV
34 script to create the necessary device nodes. On some systems you use a
35 script named 'snddevices'.
41 The user can load modules with options. If the module supports more than
42 one card and you have more than one card of the same type then you can
43 specify multiple values for the option separated by commas.
45 Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
50 The core ALSA module. It is used by all ALSA card drivers.
51 It takes the following options which have global effects.
53 major - major number for sound driver
56 - limiting card index for auto-loading (1-8)
58 - For auto-loading more than one card, specify this
59 option together with snd-card-X aliases.
60 slots - Reserve the slot index for the given driver.
61 This option takes multiple strings.
62 See "Module Autoloading Support" section for details.
67 The PCM OSS emulation module.
68 This module takes options which change the mapping of devices.
70 dsp_map - PCM device number maps assigned to the 1st OSS device.
72 adsp_map - PCM device number maps assigned to the 2st OSS device.
75 - Don't block opening busy PCM devices. Default: 1
77 For example, when dsp_map=2, /dev/dsp will be mapped to PCM #2 of
78 the card #0. Similarly, when adsp_map=0, /dev/adsp will be mapped
79 to PCM #0 of the card #0.
80 For changing the second or later card, specify the option with
81 commas, such like "dsp_map=0,1".
83 nonblock_open option is used to change the behavior of the PCM
84 regarding opening the device. When this option is non-zero,
85 opening a busy OSS PCM device won't be blocked but return
86 immediately with EAGAIN (just like O_NONBLOCK flag).
91 This module takes options which change the mapping of devices.
92 similar to those of the snd-pcm-oss module.
94 midi_map - MIDI device number maps assigned to the 1st OSS device.
96 amidi_map - MIDI device number maps assigned to the 2st OSS device.
99 Common parameters for top sound card modules
100 --------------------------------------------
102 Each of top level sound card module takes the following options.
104 index - index (slot #) of sound card
105 - Values: 0 through 31 or negative
106 - If nonnegative, assign that index number
107 - if negative, interpret as a bitmask of permissible
108 indices; the first free permitted index is assigned
110 id - card ID (identifier or name)
111 - Can be up to 15 characters long
112 - Default: the card type
113 - A directory by this name is created under /proc/asound/
114 containing information about the card
115 - This ID can be used instead of the index number in
118 - Default: enabled, for PCI and ISA PnP cards
123 Module for AdLib FM cards.
125 port - port # for OPL chip
127 This module supports multiple cards. It does not support autoprobe, so
128 the port must be specified. For actual AdLib FM cards it will be 0x388.
129 Note that this card does not have PCM support and no mixer; only FM
132 Make sure you have "sbiload" from the alsa-tools package available and,
133 after loading the module, find out the assigned ALSA sequencer port
134 number through "sbiload -l". Example output:
136 Port Client name Port name
137 64:0 OPL2 FM synth OPL2 FM Port
139 Load the std.sb and drums.sb patches also supplied by sbiload:
141 sbiload -p 64:0 std.sb drums.sb
143 If you use this driver to drive an OPL3, you can use std.o3 and drums.o3
144 instead. To have the card produce sound, use aplaymidi from alsa-utils:
146 aplaymidi -p 64:0 foo.mid
151 Module for sound cards based on Analog Devices AD1816A/AD1815 ISA chips.
153 clockfreq - Clock frequency for AD1816A chip (default = 0, 33000Hz)
155 This module supports multiple cards, autoprobe and PnP.
160 Module for sound cards based on AD1848/AD1847/CS4248 ISA chips.
162 port - port # for AD1848 chip
163 irq - IRQ # for AD1848 chip
164 dma1 - DMA # for AD1848 chip (0,1,3)
166 This module supports multiple cards. It does not support autoprobe
167 thus main port must be specified!!! Other ports are optional.
169 The power-management is supported.
174 Module for Analog Devices AD1889 chips.
176 ac97_quirk - AC'97 workaround for strange hardware
177 See the description of intel8x0 module for details.
179 This module supports multiple cards.
184 Module for ALi M5451 PCI chip.
186 pcm_channels - Number of hardware channels assigned for PCM
187 spdif - Support SPDIF I/O
190 This module supports one chip and autoprobe.
192 The power-management is supported.
197 Module for sound cards based on Avance Logic ALS100/ALS120 ISA chips.
199 This module supports multiple cards, autoprobe and PnP.
201 The power-management is supported.
206 Module for Avance Logic ALS300 and ALS300+
208 This module supports multiple cards.
210 The power-management is supported.
215 Module for sound cards based on Avance Logic ALS4000 PCI chip.
217 joystick_port - port # for legacy joystick support.
218 0 = disabled (default), 1 = auto-detect
220 This module supports multiple cards, autoprobe and PnP.
222 The power-management is supported.
227 Module for ATI IXP 150/200/250/400 AC97 controllers.
229 ac97_clock - AC'97 clock (default = 48000)
230 ac97_quirk - AC'97 workaround for strange hardware
231 See "AC97 Quirk Option" section below.
232 ac97_codec - Workaround to specify which AC'97 codec
233 instead of probing. If this works for you
234 file a bug with your `lspci -vn` output.
236 -1 -- Default behavior.
237 0-2 -- Use the specified codec.
238 spdif_aclink - S/PDIF transfer over AC-link (default = 1)
240 This module supports one card and autoprobe.
242 ATI IXP has two different methods to control SPDIF output. One is
243 over AC-link and another is over the "direct" SPDIF output. The
244 implementation depends on the motherboard, and you'll need to
245 choose the correct one via spdif_aclink module option.
247 The power-management is supported.
249 Module snd-atiixp-modem
250 -----------------------
252 Module for ATI IXP 150/200/250 AC97 modem controllers.
254 This module supports one card and autoprobe.
256 Note: The default index value of this module is -2, i.e. the first
259 The power-management is supported.
261 Module snd-au8810, snd-au8820, snd-au8830
262 -----------------------------------------
264 Module for Aureal Vortex, Vortex2 and Advantage device.
266 pcifix - Control PCI workarounds
267 0 = Disable all workarounds
268 1 = Force the PCI latency of the Aureal card to 0xff
269 2 = Force the Extend PCI#2 Internal Master for Efficient
270 Handling of Dummy Requests on the VIA KT133 AGP Bridge
271 3 = Force both settings
272 255 = Autodetect what is required (default)
274 This module supports all ADB PCM channels, ac97 mixer, SPDIF, hardware
275 EQ, mpu401, gameport. A3D and wavetable support are still in development.
276 Development and reverse engineering work is being coordinated at
277 http://savannah.nongnu.org/projects/openvortex/
278 SPDIF output has a copy of the AC97 codec output, unless you use the
279 "spdif" pcm device, which allows raw data passthru.
280 The hardware EQ hardware and SPDIF is only present in the Vortex2 and
283 Note: Some ALSA mixer applications don't handle the SPDIF sample rate
284 control correctly. If you have problems regarding this, try
285 another ALSA compliant mixer (alsamixer works).
290 Module for Audiowerk2 sound card
292 This module supports multiple cards.
297 Module for sound cards based on Aztech System AZT2320 ISA chip (PnP only).
299 This module supports multiple cards, PnP and autoprobe.
301 The power-management is supported.
306 Module for sound cards based on Aztech AZF3328 PCI chip.
308 joystick - Enable joystick (default off)
310 This module supports multiple cards.
315 Module for video cards based on Bt87x chips.
317 digital_rate - Override the default digital rate (Hz)
318 load_all - Load the driver even if the card model isn't known
320 This module supports multiple cards.
322 Note: The default index value of this module is -2, i.e. the first
328 Module for Creative Audigy LS and SB Live 24bit
330 This module supports multiple cards.
336 Module for sound cards based on C-Media CMI8330 ISA chips.
338 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
340 with isapnp=0, the following options are available:
342 wssport - port # for CMI8330 chip (WSS)
343 wssirq - IRQ # for CMI8330 chip (WSS)
344 wssdma - first DMA # for CMI8330 chip (WSS)
345 sbport - port # for CMI8330 chip (SB16)
346 sbirq - IRQ # for CMI8330 chip (SB16)
347 sbdma8 - 8bit DMA # for CMI8330 chip (SB16)
348 sbdma16 - 16bit DMA # for CMI8330 chip (SB16)
350 This module supports multiple cards and autoprobe.
352 The power-management is supported.
357 Module for C-Media CMI8338/8738/8768/8770 PCI sound cards.
359 mpu_port - port address of MIDI interface (8338 only):
360 0x300,0x310,0x320,0x330 = legacy port,
361 0 = disable (default)
362 fm_port - port address of OPL-3 FM synthesizer (8x38 only):
364 1 = integrated PCI port (default on 8738),
366 soft_ac3 - Software-conversion of raw SPDIF packets (model 033 only)
368 joystick_port - Joystick port address (0 = disable, 1 = auto-detect)
370 This module supports autoprobe and multiple cards.
372 The power-management is supported.
377 Module for sound cards based on CS4231 ISA chips.
379 port - port # for CS4231 chip
380 mpu_port - port # for MPU-401 UART (optional), -1 = disable
381 irq - IRQ # for CS4231 chip
382 mpu_irq - IRQ # for MPU-401 UART
383 dma1 - first DMA # for CS4231 chip
384 dma2 - second DMA # for CS4231 chip
386 This module supports multiple cards. This module does not support autoprobe
387 thus main port must be specified!!! Other ports are optional.
389 The power-management is supported.
394 Module for sound cards based on CS4232/CS4232A ISA chips.
396 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
398 with isapnp=0, the following options are available:
400 port - port # for CS4232 chip (PnP setup - 0x534)
401 cport - control port # for CS4232 chip (PnP setup - 0x120,0x210,0xf00)
402 mpu_port - port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
403 fm_port - FM port # for CS4232 chip (PnP setup - 0x388), -1 = disable
404 irq - IRQ # for CS4232 chip (5,7,9,11,12,15)
405 mpu_irq - IRQ # for MPU-401 UART (9,11,12,15)
406 dma1 - first DMA # for CS4232 chip (0,1,3)
407 dma2 - second DMA # for Yamaha CS4232 chip (0,1,3), -1 = disable
409 This module supports multiple cards. This module does not support autoprobe
410 (if ISA PnP is not used) thus main port must be specified!!! Other ports are
413 The power-management is supported.
418 Module for sound cards based on CS4235/CS4236/CS4236B/CS4237B/
419 CS4238B/CS4239 ISA chips.
421 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
423 with isapnp=0, the following options are available:
425 port - port # for CS4236 chip (PnP setup - 0x534)
426 cport - control port # for CS4236 chip (PnP setup - 0x120,0x210,0xf00)
427 mpu_port - port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
428 fm_port - FM port # for CS4236 chip (PnP setup - 0x388), -1 = disable
429 irq - IRQ # for CS4236 chip (5,7,9,11,12,15)
430 mpu_irq - IRQ # for MPU-401 UART (9,11,12,15)
431 dma1 - first DMA # for CS4236 chip (0,1,3)
432 dma2 - second DMA # for CS4236 chip (0,1,3), -1 = disable
434 This module supports multiple cards. This module does not support autoprobe
435 (if ISA PnP is not used) thus main port and control port must be
436 specified!!! Other ports are optional.
438 The power-management is supported.
443 Module for Cirrus Logic CS4281 soundchip.
445 dual_codec - Secondary codec ID (0 = disable, default)
447 This module supports multiple cards.
449 The power-management is supported.
454 Module for PCI sound cards based on CS4610/CS4612/CS4614/CS4615/CS4622/
455 CS4624/CS4630/CS4280 PCI chips.
457 external_amp - Force to enable external amplifier.
458 thinkpad - Force to enable Thinkpad's CLKRUN control.
459 mmap_valid - Support OSS mmap mode (default = 0).
461 This module supports multiple cards and autoprobe.
462 Usually external amp and CLKRUN controls are detected automatically
463 from PCI sub vendor/device ids. If they don't work, give the options
466 The power-management is supported.
471 Module for Cyrix/NatSemi Geode 5530 chip.
473 Module snd-cs5535audio
474 ----------------------
476 Module for multifunction CS5535 companion PCI device
478 The power-management is supported.
483 Module for Echoaudio Darla20
485 This module supports multiple cards.
486 The driver requires the firmware loader support on kernel.
491 Module for Echoaudio Darla24
493 This module supports multiple cards.
494 The driver requires the firmware loader support on kernel.
499 Module for Diamond Technologies DT-019X / Avance Logic ALS-007 (PnP
502 This module supports multiple cards. This module is enabled only with
505 The power-management is supported.
510 Module for the dummy sound card. This "card" doesn't do any output
511 or input, but you may use this module for any application which
512 requires a sound card (like RealPlayer).
514 The power-management is supported.
519 Module for Echoaudio 3G cards (Gina3G/Layla3G)
521 This module supports multiple cards.
522 The driver requires the firmware loader support on kernel.
527 Module for EMU10K1/EMU10k2 based PCI sound cards.
528 * Sound Blaster Live!
529 * Sound Blaster PCI 512
530 * Emu APS (partially supported)
531 * Sound Blaster Audigy
533 extin - bitmap of available external inputs for FX8010 (see bellow)
534 extout - bitmap of available external outputs for FX8010 (see bellow)
535 seq_ports - allocated sequencer ports (4 by default)
536 max_synth_voices - limit of voices used for wavetable (64 by default)
537 max_buffer_size - specifies the maximum size of wavetable/pcm buffers
538 given in MB unit. Default value is 128.
539 enable_ir - enable IR
541 This module supports multiple cards and autoprobe.
543 Input & Output configurations [extin/extout]
544 * Creative Card wo/Digital out [0x0003/0x1f03]
545 * Creative Card w/Digital out [0x0003/0x1f0f]
546 * Creative Card w/Digital CD in [0x000f/0x1f0f]
547 * Creative Card wo/Digital out + LiveDrive [0x3fc3/0x1fc3]
548 * Creative Card w/Digital out + LiveDrive [0x3fc3/0x1fcf]
549 * Creative Card w/Digital CD in + LiveDrive [0x3fcf/0x1fcf]
550 * Creative Card wo/Digital out + Digital I/O 2 [0x0fc3/0x1f0f]
551 * Creative Card w/Digital out + Digital I/O 2 [0x0fc3/0x1f0f]
552 * Creative Card w/Digital CD in + Digital I/O 2 [0x0fcf/0x1f0f]
553 * Creative Card 5.1/w Digital out + LiveDrive [0x3fc3/0x1fff]
554 * Creative Card 5.1 (c) 2003 [0x3fc3/0x7cff]
555 * Creative Card all ins and outs [0x3fff/0x7fff]
557 The power-management is supported.
562 Module for Creative Emu10k1X (SB Live Dell OEM version)
564 This module supports multiple cards.
569 Module for Ensoniq AudioPCI ES1370 PCI sound cards.
570 * SoundBlaster PCI 64
571 * SoundBlaster PCI 128
573 joystick - Enable joystick (default off)
575 This module supports multiple cards and autoprobe.
577 The power-management is supported.
582 Module for Ensoniq AudioPCI ES1371 PCI sound cards.
583 * SoundBlaster PCI 64
584 * SoundBlaster PCI 128
585 * SoundBlaster Vibra PCI
587 joystick_port - port # for joystick (0x200,0x208,0x210,0x218),
588 0 = disable (default), 1 = auto-detect
590 This module supports multiple cards and autoprobe.
592 The power-management is supported.
597 Module for sound cards based on ESS ES968 chip (PnP only).
599 This module supports multiple cards, PnP and autoprobe.
601 The power-management is supported.
606 Module for ESS AudioDrive ES-1688 and ES-688 sound cards.
608 port - port # for ES-1688 chip (0x220,0x240,0x260)
609 mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
610 irq - IRQ # for ES-1688 chip (5,7,9,10)
611 mpu_irq - IRQ # for MPU-401 port (5,7,9,10)
612 dma8 - DMA # for ES-1688 chip (0,1,3)
614 This module supports multiple cards and autoprobe (without MPU-401 port).
619 Module for ESS AudioDrive ES-18xx sound cards.
621 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
623 with isapnp=0, the following options are available:
625 port - port # for ES-18xx chip (0x220,0x240,0x260)
626 mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
627 fm_port - port # for FM (optional, not used)
628 irq - IRQ # for ES-18xx chip (5,7,9,10)
629 dma1 - first DMA # for ES-18xx chip (0,1,3)
630 dma2 - first DMA # for ES-18xx chip (0,1,3)
632 This module supports multiple cards, ISA PnP and autoprobe (without MPU-401
633 port if native ISA PnP routines are not used).
634 When dma2 is equal with dma1, the driver works as half-duplex.
636 The power-management is supported.
641 Module for sound cards based on ESS Solo-1 (ES1938,ES1946) chips.
643 This module supports multiple cards and autoprobe.
645 The power-management is supported.
650 Module for sound cards based on ESS Maestro-1/2/2E (ES1968/ES1978) chips.
652 total_bufsize - total buffer size in kB (1-4096kB)
653 pcm_substreams_p - playback channels (1-8, default=2)
654 pcm_substreams_c - capture channels (1-8, default=0)
655 clock - clock (0 = auto-detection)
656 use_pm - support the power-management (0 = off, 1 = on,
658 enable_mpu - enable MPU401 (0 = off, 1 = on, 2 = auto (default))
659 joystick - enable joystick (default off)
661 This module supports multiple cards and autoprobe.
663 The power-management is supported.
668 Module for ForteMedia FM801 based PCI sound cards.
670 tea575x_tuner - Enable TEA575x tuner
671 - 1 = MediaForte 256-PCS
672 - 2 = MediaForte 256-PCPR
673 - 3 = MediaForte 64-PCR
674 - High 16-bits are video (radio) device number + 1
675 - example: 0x10002 (MediaForte 256-PCPR, device 1)
677 This module supports multiple cards and autoprobe.
679 The power-management is supported.
684 Module for Echoaudio Gina20
686 This module supports multiple cards.
687 The driver requires the firmware loader support on kernel.
692 Module for Echoaudio Gina24
694 This module supports multiple cards.
695 The driver requires the firmware loader support on kernel.
697 Module snd-gusclassic
698 ---------------------
700 Module for Gravis UltraSound Classic sound card.
702 port - port # for GF1 chip (0x220,0x230,0x240,0x250,0x260)
703 irq - IRQ # for GF1 chip (3,5,9,11,12,15)
704 dma1 - DMA # for GF1 chip (1,3,5,6,7)
705 dma2 - DMA # for GF1 chip (1,3,5,6,7,-1=disable)
706 joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
707 voices - GF1 voices limit (14-32)
708 pcm_voices - reserved PCM voices
710 This module supports multiple cards and autoprobe.
712 Module snd-gusextreme
713 ---------------------
715 Module for Gravis UltraSound Extreme (Synergy ViperMax) sound card.
717 port - port # for ES-1688 chip (0x220,0x230,0x240,0x250,0x260)
718 gf1_port - port # for GF1 chip (0x210,0x220,0x230,0x240,0x250,0x260,0x270)
719 mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable
720 irq - IRQ # for ES-1688 chip (5,7,9,10)
721 gf1_irq - IRQ # for GF1 chip (3,5,9,11,12,15)
722 mpu_irq - IRQ # for MPU-401 port (5,7,9,10)
723 dma8 - DMA # for ES-1688 chip (0,1,3)
724 dma1 - DMA # for GF1 chip (1,3,5,6,7)
725 joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
726 voices - GF1 voices limit (14-32)
727 pcm_voices - reserved PCM voices
729 This module supports multiple cards and autoprobe (without MPU-401 port).
734 Module for Gravis UltraSound MAX sound card.
736 port - port # for GF1 chip (0x220,0x230,0x240,0x250,0x260)
737 irq - IRQ # for GF1 chip (3,5,9,11,12,15)
738 dma1 - DMA # for GF1 chip (1,3,5,6,7)
739 dma2 - DMA # for GF1 chip (1,3,5,6,7,-1=disable)
740 joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
741 voices - GF1 voices limit (14-32)
742 pcm_voices - reserved PCM voices
744 This module supports multiple cards and autoprobe.
749 Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8),
750 ATI SB450, SB600, RS600,
754 [Multiple options for each card instance]
755 model - force the model name
756 position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size)
757 probe_mask - Bitmask to probe codecs (default = -1, meaning all slots)
759 [Single (global) options]
760 single_cmd - Use single immediate commands to communicate with
761 codecs (for debugging only)
762 enable_msi - Enable Message Signaled Interrupt (MSI) (default = off)
763 power_save - Automatic power-saving timtout (in second, 0 =
765 power_save_controller - Reset HD-audio controller in power-saving mode
768 This module supports multiple cards and autoprobe.
770 Each codec may have a model table for different configurations.
771 If your machine isn't listed there, the default (usually minimal)
772 configuration is set up. You can pass "model=<name>" option to
773 specify a certain model in such a case. There are different
774 models depending on the codec chip.
776 Model name Description
777 ---------- -----------
779 3stack 3-jack in back and a headphone out
780 3stack-digout 3-jack in back, a HP out and a SPDIF out
781 5stack 5-jack in back, 2-jack in front
782 5stack-digout 5-jack in back, 2-jack in front, a SPDIF out
783 6stack 6-jack in back, 2-jack in front
784 6stack-digout 6-jack with a SPDIF out
786 z71v 3-jack (HP shared SPDIF)
787 asus 3-jack (ASUS Mobo)
789 asus-dig ASUS with SPDIF out
790 asus-dig2 ASUS with SPDIF out (using GPIO2)
792 fujitsu Fujitsu Laptops (Pi1536)
794 lg LG laptop (m1 express dual)
795 lg-lw LG LW20/LW25 laptop
797 clevo Clevo laptops (m520G, m665n)
798 test for testing/debugging purpose, almost all controls can be
799 adjusted. Appearing only when compiled with
801 auto auto-config reading BIOS (default)
805 hp-3013 HP machines (3013-variant)
806 fujitsu Fujitsu S7020
808 will Will laptops (PB V7900)
809 replacer Replacer 672V
810 basic fixed pin assignment (old default model)
811 test for testing/debugging purpose, almost all controls can
812 adjusted. Appearing only when compiled with
814 auto auto-config reading BIOS (default)
817 fujitsu Fujitsu Laptop
818 hp-bpc HP xw4400/6400/8400/9400 laptops
819 hp-bpc-d7000 HP BPC D7000
820 hp-tc-t5735 HP Thin Client T5735
824 hippo Hippo (ATI) with jack detection, Sony UX-90s
825 hippo_1 Hippo (Benq) with jack detection
826 sony-assamd Sony ASSAMD
827 ultra Samsung Q1 Ultra Vista model
828 basic fixed pin assignment w/o SPDIF
829 auto auto-config reading BIOS (default)
835 dell Dell OEM laptops (Vostro 1200)
837 test for testing/debugging purpose, almost all controls can
838 adjusted. Appearing only when compiled with
840 auto auto-config reading BIOS (default)
843 3stack-dig 3-stack (2-channel) with SPDIF
844 3stack-6ch 3-stack (6-channel)
845 3stack-6ch-dig 3-stack (6-channel) with SPDIF
846 6stack-dig 6-stack with SPDIF
847 lenovo-101e Lenovo laptop
848 eeepc-p701 ASUS Eeepc P701
849 eeepc-ep20 ASUS Eeepc EP20
850 auto auto-config reading BIOS (default)
853 3stack-dig 3-jack with SPDIF I/O
854 6stack-dig 6-jack digital with SPDIF I/O
856 targa Targa T8, MSI-1049 T8
859 macpro MacPro support
860 mbp3 Macbook Pro rev3
861 imac24 iMac 24'' with jack detection
863 auto auto-config reading BIOS (default)
866 3stack-dig 3-jack with SPDIF I/O
867 6stack-dig 6-jack digital with SPDIF I/O
868 3stack-6ch 3-jack 6-channel
869 3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
870 6stack-dig-demo 6-jack digital for Intel demo board
871 acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
872 acer-aspire Acer Aspire 9810
873 medion Medion Laptops
874 medion-md2 Medion MD2
876 targa-2ch-dig Targs/MSI with 2-channel
877 laptop-eapd 3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
878 lenovo-101e Lenovo 101E
879 lenovo-nb0763 Lenovo NB0763
880 lenovo-ms7195-dig Lenovo MS7195
882 6stack-hp HP machines with 6stack (Nettle boards)
883 3stack-hp HP machines with 3stack (Lucknow, Samba boards)
884 6stack-dell Dell machines with 6stack (Inspiron 530)
886 auto auto-config reading BIOS (default)
890 3stack-dig 3-jack with SPDIF I/O
891 6stack-dig 6-jack with SPDIF I/O
892 3stack-660 3-jack (for ALC660)
893 uniwill-m31 Uniwill M31 laptop
894 toshiba Toshiba laptop support
895 asus Asus laptop support
896 asus-laptop ASUS F2/F3 laptops
897 auto auto-config reading BIOS (default)
901 3stack-dig 3-jack with SPDIF OUT
902 6stack-dig 6-jack with SPDIF OUT
903 3stack-660 3-jack (for ALC660VD)
904 3stack-660-digout 3-jack with SPDIF OUT (for ALC660VD)
905 lenovo Lenovo 3000 C200
906 dallas Dallas laptops
908 auto auto-config reading BIOS (default)
911 minimal 3-jack in back
912 min_fp 3-jack in back, 2-jack in front
913 full 6-jack in back, 2-jack in front
914 full_dig 6-jack in back, 2-jack in front, SPDIF I/O
915 allout 5-jack in back, 2-jack in front, SPDIF out
916 auto auto-config reading BIOS (default)
919 3stack 3-stack mode (default)
922 AD1884A / AD1883 / AD1984A / AD1984B
923 desktop 3-stack desktop (default)
924 laptop laptop with HP jack sensing
925 mobile mobile devices with HP jack sensing
931 basic 3-jack (default)
933 thinkpad Lenovo Thinkpad T60/X60/Z60
940 basic default configuration
941 thinkpad Lenovo Thinkpad T61/X61
945 6stack 6-jack, separate surrounds (default)
946 3stack 3-stack, shared surrounds
947 laptop 2-channel only (FSC V2060, Samsung M50)
948 laptop-eapd 2-channel with EAPD (Samsung R65, ASUS A6J)
949 laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100)
950 ultra 2-channel with EAPD (Samsung Ultra tablet PC)
954 6stack-dig ditto with SPDIF
956 3stack-dig ditto with SPDIF
957 laptop 3-jack with hp-jack automute
958 laptop-dig ditto with SPDIF
959 auto auto-config reading BIOS (default)
962 laptop-hpsense Laptop with HP sense (old model laptop)
963 laptop-micsense Laptop with Mic sense (old model fujitsu)
964 laptop-hpmicsense Laptop with HP and Mic senses
966 test for testing/debugging purpose, almost all controls
967 can be adjusted. Appearing only when compiled with
971 laptop Basic Laptop config
972 laptop-hp Laptop config for some HP models (subdevice 30A5)
973 laptop-eapd Laptop config with EAPD support
974 test for testing/debugging purpose, almost all controls
975 can be adjusted. Appearing only when compiled with
979 laptop Basic Laptop config (default)
984 dell-d21 Dell (unknown)
985 dell-d22 Dell (unknown)
986 dell-d23 Dell (unknown)
987 dell-m21 Dell Inspiron 630m, Dell Inspiron 640m
988 dell-m22 Dell Latitude D620, Dell Latitude D820
989 dell-m23 Dell XPS M1710, Dell Precision M90
990 dell-m24 Dell Latitude 120L
991 dell-m25 Dell Inspiron E1505n
992 dell-m26 Dell Inspiron 1501
993 dell-m27 Dell Inspiron E1705/9400
994 gateway Gateway laptops with EAPD control
998 dell-m42 Dell (unknown)
999 dell-m43 Dell Precision
1000 dell-m44 Dell Inspiron
1005 5stack D945 5stack + SPDIF
1006 intel-mac-v1 Intel Mac Type 1
1007 intel-mac-v2 Intel Mac Type 2
1008 intel-mac-v3 Intel Mac Type 3
1009 intel-mac-v4 Intel Mac Type 4
1010 intel-mac-v5 Intel Mac Type 5
1011 macmini Intel Mac Mini (equivalent with type 3)
1012 macbook Intel Mac Book (eq. type 5)
1013 macbook-pro-v1 Intel Mac Book Pro 1st generation (eq. type 3)
1014 macbook-pro Intel Mac Book Pro 2nd generation (eq. type 3)
1015 imac-intel Intel iMac (eq. type 2)
1016 imac-intel-20 Intel iMac (newer version) (eq. type 3)
1017 dell-d81 Dell (unknown)
1018 dell-d82 Dell (unknown)
1019 dell-m81 Dell (unknown)
1020 dell-m82 Dell XPS M1210
1023 ref Reference board, base config
1024 m2-2 Some Gateway MX series laptops
1025 m6 Some Gateway NX series laptops
1026 pa6 Gateway NX860 series
1028 STAC9227/9228/9229/927x
1031 5stack D965 5stack + SPDIF
1032 dell-3stack Dell Dimension E520
1035 vaio Setup for VAIO FE550G/SZ110
1036 vaio-ar Setup for VAIO AR
1038 The model name "genric" is treated as a special case. When this
1039 model is given, the driver uses the generic codec parser without
1040 "codec-patch". It's sometimes good for testing and debugging.
1042 If the default configuration doesn't work and one of the above
1043 matches with your device, report it together with the PCI
1044 subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel
1045 ML (see the section "Links and Addresses").
1047 power_save and power_save_controller options are for power-saving
1048 mode. See powersave.txt for details.
1050 Note 2: If you get click noises on output, try the module option
1051 position_fix=1 or 2. position_fix=1 will use the SD_LPIB
1052 register value without FIFO size correction as the current
1053 DMA pointer. position_fix=2 will make the driver to use
1054 the position buffer instead of reading SD_LPIB register.
1055 (Usually SD_LPLIB register is more accurate than the
1058 NB: If you get many "azx_get_response timeout" messages at
1059 loading, it's likely a problem of interrupts (e.g. ACPI irq
1060 routing). Try to boot with options like "pci=noacpi". Also, you
1061 can try "single_cmd=1" module option. This will switch the
1062 communication method between HDA controller and codecs to the
1063 single immediate commands instead of CORB/RIRB. Basically, the
1064 single command mode is provided only for BIOS, and you won't get
1065 unsolicited events, too. But, at least, this works independently
1066 from the irq. Remember this is a last resort, and should be
1067 avoided as much as possible...
1069 MORE NOTES ON "azx_get_response timeout" PROBLEMS:
1070 On some hardwares, you may need to add a proper probe_mask option
1071 to avoid the "azx_get_response timeout" problem above, instead.
1072 This occurs when the access to non-existing or non-working codec slot
1073 (likely a modem one) causes a stall of the communication via HD-audio
1074 bus. You can see which codec slots are probed by enabling
1075 CONFIG_SND_DEBUG_DETECT, or simply from the file name of the codec
1076 proc files. Then limit the slots to probe by probe_mask option.
1077 For example, probe_mask=1 means to probe only the first slot, and
1078 probe_mask=4 means only the third slot.
1080 The power-management is supported.
1085 Module for RME Hammerfall DSP audio interface(s)
1087 This module supports multiple cards.
1089 Note: The firmware data can be automatically loaded via hotplug
1090 when CONFIG_FW_LOADER is set. Otherwise, you need to load
1091 the firmware via hdsploader utility included in alsa-tools
1093 The firmware data is found in alsa-firmware package.
1095 Note: snd-page-alloc module does the job which snd-hammerfall-mem
1096 module did formerly. It will allocate the buffers in advance
1097 when any HDSP cards are found. To make the buffer
1098 allocation sure, load snd-page-alloc module in the early
1099 stage of boot sequence. See "Early Buffer Allocation"
1105 Module for RME HDSP MADI board.
1107 precise_ptr - Enable precise pointer, or disable.
1108 line_outs_monitor - Send playback streams to analog outs by default.
1109 enable_monitor - Enable Analog Out on Channel 63/64 by default.
1111 See hdspm.txt for details.
1116 Module for the MediaTek/TempoTec HiFier Fantasia sound card.
1118 This module supports autoprobe and multiple cards.
1120 Power management is _not_ supported.
1125 Module for Envy24 (ICE1712) based PCI sound cards.
1126 * MidiMan M Audio Delta 1010
1127 * MidiMan M Audio Delta 1010LT
1128 * MidiMan M Audio Delta DiO 2496
1129 * MidiMan M Audio Delta 66
1130 * MidiMan M Audio Delta 44
1131 * MidiMan M Audio Delta 410
1132 * MidiMan M Audio Audiophile 2496
1135 * TerraTec EWX 24/96
1136 * TerraTec DMX 6Fire
1138 * Hoontech SoundTrack DSP 24
1139 * Hoontech SoundTrack DSP 24 Value
1140 * Hoontech SoundTrack DSP 24 Media 7.1
1141 * Event Electronics, EZ8
1143 * Lionstracs, Mediastaton
1145 model - Use the given board model, one of the following:
1146 delta1010, dio2496, delta66, delta44, audiophile, delta410,
1147 delta1010lt, vx442, ewx2496, ews88mt, ews88mt_new, ews88d,
1148 dmx6fire, dsp24, dsp24_value, dsp24_71, ez8,
1149 phase88, mediastation
1150 omni - Omni I/O support for MidiMan M-Audio Delta44/66
1151 cs8427_timeout - reset timeout for the CS8427 chip (S/PDIF transceiver)
1152 in msec resolution, default value is 500 (0.5 sec)
1154 This module supports multiple cards and autoprobe. Note: The consumer part
1155 is not used with all Envy24 based cards (for example in the MidiMan Delta
1158 Note: The supported board is detected by reading EEPROM or PCI
1159 SSID (if EEPROM isn't available). You can override the
1160 model by passing "model" module option in case that the
1161 driver isn't configured properly or you want to try another
1167 Module for Envy24HT (VT/ICE1724), Envy24PT (VT1720) based PCI sound cards.
1168 * MidiMan M Audio Revolution 5.1
1169 * MidiMan M Audio Revolution 7.1
1170 * MidiMan M Audio Audiophile 192
1172 * TerraTec Aureon 5.1 Sky
1173 * TerraTec Aureon 7.1 Space
1174 * TerraTec Aureon 7.1 Universe
1177 * AudioTrak Prodigy 7.1
1178 * AudioTrak Prodigy 7.1LT
1179 * AudioTrak Prodigy 192
1181 * Albatron K8X800 Pro II
1182 * Chaintech ZNF3-150
1183 * Chaintech ZNF3-250
1190 model - Use the given board model, one of the following:
1191 revo51, revo71, amp2000, prodigy71, prodigy71lt,
1192 prodigy192, aureon51, aureon71, universe, ap192,
1193 k8x800, phase22, phase28, ms300, av710, se200pci,
1196 This module supports multiple cards and autoprobe.
1198 Note: The supported board is detected by reading EEPROM or PCI
1199 SSID (if EEPROM isn't available). You can override the
1200 model by passing "model" module option in case that the
1201 driver isn't configured properly or you want to try another
1207 Module for Echoaudio Indigo
1209 This module supports multiple cards.
1210 The driver requires the firmware loader support on kernel.
1215 Module for Echoaudio Indigo DJ
1217 This module supports multiple cards.
1218 The driver requires the firmware loader support on kernel.
1223 Module for Echoaudio Indigo IO
1225 This module supports multiple cards.
1226 The driver requires the firmware loader support on kernel.
1231 Module for AC'97 motherboards from Intel and compatibles.
1232 * Intel i810/810E, i815, i820, i830, i84x, MX440
1233 ICH5, ICH6, ICH7, ESB2
1234 * SiS 7012 (SiS 735)
1235 * NVidia NForce, NForce2, NForce3, MCP04, CK804
1237 * AMD AMD768, AMD8111
1240 ac97_clock - AC'97 codec clock base (0 = auto-detect)
1241 ac97_quirk - AC'97 workaround for strange hardware
1242 See "AC97 Quirk Option" section below.
1243 buggy_irq - Enable workaround for buggy interrupts on some
1244 motherboards (default yes on nForce chips,
1246 buggy_semaphore - Enable workaround for hardwares with buggy
1247 semaphores (e.g. on some ASUS laptops)
1249 spdif_aclink - Use S/PDIF over AC-link instead of direct connection
1250 from the controller chip
1251 (0 = off, 1 = on, -1 = default)
1253 This module supports one chip and autoprobe.
1255 Note: the latest driver supports auto-detection of chip clock.
1256 if you still encounter too fast playback, specify the clock
1257 explicitly via the module option "ac97_clock=41194".
1259 Joystick/MIDI ports are not supported by this driver. If your
1260 motherboard has these devices, use the ns558 or snd-mpu401
1261 modules, respectively.
1263 The power-management is supported.
1265 Module snd-intel8x0m
1266 --------------------
1268 Module for Intel ICH (i8x0) chipset MC97 modems.
1269 * Intel i810/810E, i815, i820, i830, i84x, MX440
1271 * SiS 7013 (SiS 735)
1272 * NVidia NForce, NForce2, NForce2s, NForce3
1276 ac97_clock - AC'97 codec clock base (0 = auto-detect)
1278 This module supports one card and autoprobe.
1280 Note: The default index value of this module is -2, i.e. the first
1283 The power-management is supported.
1285 Module snd-interwave
1286 --------------------
1288 Module for Gravis UltraSound PnP, Dynasonic 3-D/Pro, STB Sound Rage 32
1289 and other sound cards based on AMD InterWave (tm) chip.
1291 joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
1292 midi - 1 = MIDI UART enable, 0 = MIDI UART disable (default)
1293 pcm_voices - reserved PCM voices for the synthesizer (default 2)
1294 effect - 1 = InterWave effects enable (default 0);
1296 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1298 with isapnp=0, the following options are available:
1300 port - port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
1301 irq - IRQ # for InterWave chip (3,5,9,11,12,15)
1302 dma1 - DMA # for InterWave chip (0,1,3,5,6,7)
1303 dma2 - DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
1305 This module supports multiple cards, autoprobe and ISA PnP.
1307 Module snd-interwave-stb
1308 ------------------------
1310 Module for UltraSound 32-Pro (sound card from STB used by Compaq)
1311 and other sound cards based on AMD InterWave (tm) chip with TEA6330T
1312 circuit for extended control of bass, treble and master volume.
1314 joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
1315 midi - 1 = MIDI UART enable, 0 = MIDI UART disable (default)
1316 pcm_voices - reserved PCM voices for the synthesizer (default 2)
1317 effect - 1 = InterWave effects enable (default 0);
1319 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1321 with isapnp=0, the following options are available:
1323 port - port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
1324 port_tc - tone control (i2c bus) port # for TEA6330T chip (0x350,0x360,0x370,0x380)
1325 irq - IRQ # for InterWave chip (3,5,9,11,12,15)
1326 dma1 - DMA # for InterWave chip (0,1,3,5,6,7)
1327 dma2 - DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
1329 This module supports multiple cards, autoprobe and ISA PnP.
1334 Module for Korg 1212 IO PCI card
1336 This module supports multiple cards.
1341 Module for Echoaudio Layla20
1343 This module supports multiple cards.
1344 The driver requires the firmware loader support on kernel.
1349 Module for Echoaudio Layla24
1351 This module supports multiple cards.
1352 The driver requires the firmware loader support on kernel.
1357 Module for Allegro/Maestro3 chips
1359 external_amp - enable external amp (enabled by default)
1360 amp_gpio - GPIO pin number for external amp (0-15) or
1361 -1 for default pin (8 for allegro, 1 for
1364 This module supports autoprobe and multiple chips.
1366 Note: the binding of amplifier is dependent on hardware.
1367 If there is no sound even though all channels are unmuted, try to
1368 specify other gpio connection via amp_gpio option.
1369 For example, a Panasonic notebook might need "amp_gpio=0x0d"
1372 The power-management is supported.
1377 Module for Echoaudio Mia
1379 This module supports multiple cards.
1380 The driver requires the firmware loader support on kernel.
1385 Module for Miro soundcards: miroSOUND PCM 1 pro,
1387 miroSOUND PCM 20 Radio.
1389 port - Port # (0x530,0x604,0xe80,0xf40)
1390 irq - IRQ # (5,7,9,10,11)
1391 dma1 - 1st dma # (0,1,3)
1392 dma2 - 2nd dma # (0,1)
1393 mpu_port - MPU-401 port # (0x300,0x310,0x320,0x330)
1394 mpu_irq - MPU-401 irq # (5,7,9,10)
1395 fm_port - FM Port # (0x388)
1396 wss - enable WSS mode
1397 ide - enable onboard ide support
1402 Module for Digigram miXart8 sound cards.
1404 This module supports multiple cards.
1405 Note: One miXart8 board will be represented as 4 alsa cards.
1406 See MIXART.txt for details.
1408 When the driver is compiled as a module and the hotplug firmware
1409 is supported, the firmware data is loaded via hotplug automatically.
1410 Install the necessary firmware files in alsa-firmware package.
1411 When no hotplug fw loader is available, you need to load the
1412 firmware via mixartloader utility in alsa-tools package.
1417 Module for Echoaudio Mona
1419 This module supports multiple cards.
1420 The driver requires the firmware loader support on kernel.
1425 Module for MPU-401 UART devices.
1427 port - port number or -1 (disable)
1428 irq - IRQ number or -1 (disable)
1429 pnp - PnP detection - 0 = disable, 1 = enable (default)
1431 This module supports multiple devices and PnP.
1436 Module for MOTU MidiTimePiece AV multiport MIDI (on the parallel
1439 port - I/O port # for MTPAV (0x378,0x278, default=0x378)
1440 irq - IRQ # for MTPAV (7,5, default=7)
1441 hwports - number of supported hardware ports, default=8.
1443 Module supports only 1 card. This module has no enable option.
1448 Module for Ego Systems (ESI) Miditerminal 4140
1450 This module supports multiple devices.
1451 Requires parport (CONFIG_PARPORT).
1456 Module for NeoMagic NM256AV/ZX chips
1458 playback_bufsize - max playback frame size in kB (4-128kB)
1459 capture_bufsize - max capture frame size in kB (4-128kB)
1460 force_ac97 - 0 or 1 (disabled by default)
1461 buffer_top - specify buffer top address
1462 use_cache - 0 or 1 (disabled by default)
1463 vaio_hack - alias buffer_top=0x25a800
1464 reset_workaround - enable AC97 RESET workaround for some laptops
1465 reset_workaround2 - enable extended AC97 RESET workaround for some
1468 This module supports one chip and autoprobe.
1470 The power-management is supported.
1472 Note: on some notebooks the buffer address cannot be detected
1473 automatically, or causes hang-up during initialization.
1474 In such a case, specify the buffer top address explicitly via
1475 the buffer_top option.
1477 Sony F250: buffer_top=0x25a800
1478 Sony F270: buffer_top=0x272800
1479 The driver supports only ac97 codec. It's possible to force
1480 to initialize/use ac97 although it's not detected. In such a
1481 case, use force_ac97=1 option - but *NO* guarantee whether it
1484 Note: The NM256 chip can be linked internally with non-AC97
1485 codecs. This driver supports only the AC97 codec, and won't work
1486 with machines with other (most likely CS423x or OPL3SAx) chips,
1487 even though the device is detected in lspci. In such a case, try
1488 other drivers, e.g. snd-cs4232 or snd-opl3sa2. Some has ISA-PnP
1489 but some doesn't have ISA PnP. You'll need to specify isapnp=0
1490 and proper hardware parameters in the case without ISA PnP.
1492 Note: some laptops need a workaround for AC97 RESET. For the
1493 known hardware like Dell Latitude LS and Sony PCG-F305, this
1494 workaround is enabled automatically. For other laptops with a
1495 hard freeze, you can try reset_workaround=1 option.
1497 Note: Dell Latitude CSx laptops have another problem regarding
1498 AC97 RESET. On these laptops, reset_workaround2 option is
1499 turned on as default. This option is worth to try if the
1500 previous reset_workaround option doesn't help.
1502 Note: This driver is really crappy. It's a porting from the
1503 OSS driver, which is a result of black-magic reverse engineering.
1504 The detection of codec will fail if the driver is loaded *after*
1505 X-server as described above. You might be able to force to load
1506 the module, but it may result in hang-up. Hence, make sure that
1507 you load this module *before* X if you encounter this kind of
1513 Module for Yamaha OPL3-SA2/SA3 sound cards.
1515 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1517 with isapnp=0, the following options are available:
1519 port - control port # for OPL3-SA chip (0x370)
1520 sb_port - SB port # for OPL3-SA chip (0x220,0x240)
1521 wss_port - WSS port # for OPL3-SA chip (0x530,0xe80,0xf40,0x604)
1522 midi_port - port # for MPU-401 UART (0x300,0x330), -1 = disable
1523 fm_port - FM port # for OPL3-SA chip (0x388), -1 = disable
1524 irq - IRQ # for OPL3-SA chip (5,7,9,10)
1525 dma1 - first DMA # for Yamaha OPL3-SA chip (0,1,3)
1526 dma2 - second DMA # for Yamaha OPL3-SA chip (0,1,3), -1 = disable
1528 This module supports multiple cards and ISA PnP. It does not support
1529 autoprobe (if ISA PnP is not used) thus all ports must be specified!!!
1531 The power-management is supported.
1533 Module snd-opti92x-ad1848
1534 -------------------------
1536 Module for sound cards based on OPTi 82c92x and Analog Devices AD1848 chips.
1537 Module works with OAK Mozart cards as well.
1539 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1541 with isapnp=0, the following options are available:
1543 port - port # for WSS chip (0x530,0xe80,0xf40,0x604)
1544 mpu_port - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1545 fm_port - port # for OPL3 device (0x388)
1546 irq - IRQ # for WSS chip (5,7,9,10,11)
1547 mpu_irq - IRQ # for MPU-401 UART (5,7,9,10)
1548 dma1 - first DMA # for WSS chip (0,1,3)
1550 This module supports only one card, autoprobe and PnP.
1552 Module snd-opti92x-cs4231
1553 -------------------------
1555 Module for sound cards based on OPTi 82c92x and Crystal CS4231 chips.
1557 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1559 with isapnp=0, the following options are available:
1561 port - port # for WSS chip (0x530,0xe80,0xf40,0x604)
1562 mpu_port - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1563 fm_port - port # for OPL3 device (0x388)
1564 irq - IRQ # for WSS chip (5,7,9,10,11)
1565 mpu_irq - IRQ # for MPU-401 UART (5,7,9,10)
1566 dma1 - first DMA # for WSS chip (0,1,3)
1567 dma2 - second DMA # for WSS chip (0,1,3)
1569 This module supports only one card, autoprobe and PnP.
1574 Module for sound cards based on OPTi 82c93x chips.
1576 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1578 with isapnp=0, the following options are available:
1580 port - port # for WSS chip (0x530,0xe80,0xf40,0x604)
1581 mpu_port - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1582 fm_port - port # for OPL3 device (0x388)
1583 irq - IRQ # for WSS chip (5,7,9,10,11)
1584 mpu_irq - IRQ # for MPU-401 UART (5,7,9,10)
1585 dma1 - first DMA # for WSS chip (0,1,3)
1586 dma2 - second DMA # for WSS chip (0,1,3)
1588 This module supports only one card, autoprobe and PnP.
1593 Module for sound cards based on the C-Media CMI8788 chip:
1595 * AuzenTech X-Meridian
1597 * Club3D Theatron DTS
1599 * Razer Barracuda AC-1
1602 This module supports autoprobe and multiple cards.
1604 Power management is _not_ supported.
1609 Module for Digigram PCXHR boards
1611 This module supports multiple cards.
1613 Module snd-portman2x4
1614 ---------------------
1616 Module for Midiman Portman 2x4 parallel port MIDI interface
1618 This module supports multiple cards.
1620 Module snd-powermac (on ppc only)
1621 ---------------------------------
1623 Module for PowerMac, iMac and iBook on-board soundchips
1625 enable_beep - enable beep using PCM (enabled as default)
1627 Module supports autoprobe a chip.
1629 Note: the driver may have problems regarding endianess.
1631 The power-management is supported.
1633 Module snd-pxa2xx-ac97 (on arm only)
1634 ------------------------------------
1636 Module for AC97 driver for the Intel PXA2xx chip
1638 For ARM architecture only.
1640 The power-management is supported.
1645 Module for Conexant Riptide chip
1647 joystick_port - Joystick port # (default: 0x200)
1648 mpu_port - MPU401 port # (default: 0x330)
1649 opl3_port - OPL3 port # (default: 0x388)
1651 This module supports multiple cards.
1652 The driver requires the firmware loader support on kernel.
1653 You need to install the firmware file "riptide.hex" to the standard
1654 firmware path (e.g. /lib/firmware).
1659 Module for RME Digi32, Digi32 Pro and Digi32/8 (Sek'd Prodif32,
1660 Prodif96 and Prodif Gold) sound cards.
1662 This module supports multiple cards.
1667 Module for RME Digi96, Digi96/8 and Digi96/8 PRO/PAD/PST sound cards.
1669 This module supports multiple cards.
1674 Module for RME Digi9652 (Hammerfall, Hammerfall-Light) sound cards.
1676 precise_ptr - Enable precise pointer (doesn't work reliably).
1679 This module supports multiple cards.
1681 Note: snd-page-alloc module does the job which snd-hammerfall-mem
1682 module did formerly. It will allocate the buffers in advance
1683 when any RME9652 cards are found. To make the buffer
1684 allocation sure, load snd-page-alloc module in the early
1685 stage of boot sequence. See "Early Buffer Allocation"
1688 Module snd-sa11xx-uda1341 (on arm only)
1689 ---------------------------------------
1691 Module for Philips UDA1341TS on Compaq iPAQ H3600 sound card.
1693 Module supports only one card.
1694 Module has no enable and index options.
1696 The power-management is supported.
1701 Module for 8-bit SoundBlaster cards: SoundBlaster 1.0,
1705 port - port # for SB DSP chip (0x220,0x240,0x260)
1706 irq - IRQ # for SB DSP chip (5,7,9,10)
1707 dma8 - DMA # for SB DSP chip (1,3)
1709 This module supports multiple cards and autoprobe.
1711 The power-management is supported.
1713 Module snd-sb16 and snd-sbawe
1714 -----------------------------
1716 Module for 16-bit SoundBlaster cards: SoundBlaster 16 (PnP),
1717 SoundBlaster AWE 32 (PnP),
1718 SoundBlaster AWE 64 PnP
1720 mic_agc - Mic Auto-Gain-Control - 0 = disable, 1 = enable (default)
1721 csp - ASP/CSP chip support - 0 = disable (default), 1 = enable
1722 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1724 with isapnp=0, the following options are available:
1726 port - port # for SB DSP 4.x chip (0x220,0x240,0x260)
1727 mpu_port - port # for MPU-401 UART (0x300,0x330), -1 = disable
1728 awe_port - base port # for EMU8000 synthesizer (0x620,0x640,0x660)
1729 (snd-sbawe module only)
1730 irq - IRQ # for SB DSP 4.x chip (5,7,9,10)
1731 dma8 - 8-bit DMA # for SB DSP 4.x chip (0,1,3)
1732 dma16 - 16-bit DMA # for SB DSP 4.x chip (5,6,7)
1734 This module supports multiple cards, autoprobe and ISA PnP.
1736 Note: To use Vibra16X cards in 16-bit half duplex mode, you must
1737 disable 16bit DMA with dma16 = -1 module parameter.
1738 Also, all Sound Blaster 16 type cards can operate in 16-bit
1739 half duplex mode through 8-bit DMA channel by disabling their
1742 The power-management is supported.
1747 Module for Gallant SC-6000 soundcard.
1749 port - Port # (0x220 or 0x240)
1750 mss_port - MSS Port # (0x530 or 0xe80)
1751 irq - IRQ # (5,7,9,10,11)
1752 mpu_irq - MPU-401 IRQ # (5,7,9,10) ,0 - no MPU-401 irq
1755 This module supports multiple cards.
1757 This card is also known as Audio Excel DSP 16 or Zoltrix AV302.
1762 Module for Aztech Sound Galaxy sound card.
1764 sbport - Port # for SB16 interface (0x220,0x240)
1765 wssport - Port # for WSS interface (0x530,0xe80,0xf40,0x604)
1766 irq - IRQ # (7,9,10,11)
1769 This module supports multiple cards.
1771 The power-management is supported.
1776 Module for ENSONIQ SoundScape PnP cards.
1778 port - Port # (PnP setup)
1779 wss_port - WSS Port # (PnP setup)
1780 irq - IRQ # (PnP setup)
1781 mpu_irq - MPU-401 IRQ # (PnP setup)
1782 dma - DMA # (PnP setup)
1783 dma2 - 2nd DMA # (PnP setup, -1 to disable)
1785 This module supports multiple cards. ISA PnP must be enabled.
1786 You need sscape_ctl tool in alsa-tools package for loading
1789 Module snd-sun-amd7930 (on sparc only)
1790 --------------------------------------
1792 Module for AMD7930 sound chips found on Sparcs.
1794 This module supports multiple cards.
1796 Module snd-sun-cs4231 (on sparc only)
1797 -------------------------------------
1799 Module for CS4231 sound chips found on Sparcs.
1801 This module supports multiple cards.
1803 Module snd-sun-dbri (on sparc only)
1804 -----------------------------------
1806 Module for DBRI sound chips found on Sparcs.
1808 This module supports multiple cards.
1810 Module snd-wavefront
1811 --------------------
1813 Module for Turtle Beach Maui, Tropez and Tropez+ sound cards.
1815 use_cs4232_midi - Use CS4232 MPU-401 interface
1816 (inaccessibly located inside your computer)
1817 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1819 with isapnp=0, the following options are available:
1821 cs4232_pcm_port - Port # for CS4232 PCM interface.
1822 cs4232_pcm_irq - IRQ # for CS4232 PCM interface (5,7,9,11,12,15).
1823 cs4232_mpu_port - Port # for CS4232 MPU-401 interface.
1824 cs4232_mpu_irq - IRQ # for CS4232 MPU-401 interface (9,11,12,15).
1825 ics2115_port - Port # for ICS2115
1826 ics2115_irq - IRQ # for ICS2115
1827 fm_port - FM OPL-3 Port #
1828 dma1 - DMA1 # for CS4232 PCM interface.
1829 dma2 - DMA2 # for CS4232 PCM interface.
1831 The below are options for wavefront_synth features:
1832 wf_raw - Assume that we need to boot the OS (default:no)
1833 If yes, then during driver loading, the state of the board is
1834 ignored, and we reset the board and load the firmware anyway.
1835 fx_raw - Assume that the FX process needs help (default:yes)
1836 If false, we'll leave the FX processor in whatever state it is
1837 when the driver is loaded. The default is to download the
1838 microprogram and associated coefficients to set it up for
1839 "default" operation, whatever that means.
1840 debug_default - Debug parameters for card initialization
1841 wait_usecs - How long to wait without sleeping, usecs
1843 This magic number seems to give pretty optimal throughput
1844 based on my limited experimentation.
1845 If you want to play around with it and find a better value, be
1846 my guest. Remember, the idea is to get a number that causes us
1847 to just busy wait for as many WaveFront commands as possible,
1848 without coming up with a number so large that we hog the whole
1850 Specifically, with this number, out of about 134,000 status
1851 waits, only about 250 result in a sleep.
1852 sleep_interval - How long to sleep when waiting for reply
1854 sleep_tries - How many times to try sleeping during a wait
1856 ospath - Pathname to processed ICS2115 OS firmware
1857 (default:wavefront.os)
1858 The path name of the ISC2115 OS firmware. In the recent
1859 version, it's handled via firmware loader framework, so it
1860 must be installed in the proper path, typically,
1862 reset_time - How long to wait for a reset to take effect
1864 ramcheck_time - How many seconds to wait for the RAM test
1866 osrun_time - How many seconds to wait for the ICS2115 OS
1869 This module supports multiple cards and ISA PnP.
1871 Note: the firmware file "wavefront.os" was located in the earlier
1872 version in /etc. Now it's loaded via firmware loader, and
1873 must be in the proper firmware path, such as /lib/firmware.
1874 Copy (or symlink) the file appropriately if you get an error
1875 regarding firmware downloading after upgrading the kernel.
1877 Module snd-sonicvibes
1878 ---------------------
1880 Module for S3 SonicVibes PCI sound cards.
1881 * PINE Schubert 32 PCI
1883 reverb - Reverb Enable - 1 = enable, 0 = disable (default)
1884 - SoundCard must have onboard SRAM for this.
1885 mge - Mic Gain Enable - 1 = enable, 0 = disable (default)
1887 This module supports multiple cards and autoprobe.
1889 Module snd-serial-u16550
1890 ------------------------
1892 Module for UART16550A serial MIDI ports.
1894 port - port # for UART16550A chip
1895 irq - IRQ # for UART16550A chip, -1 = poll mode
1896 speed - speed in bauds (9600,19200,38400,57600,115200)
1898 base - base for divisor in bauds (57600,115200,230400,460800)
1900 outs - number of MIDI ports in a serial port (1-4)
1902 adaptor - Type of adaptor.
1903 0 = Soundcanvas, 1 = MS-124T, 2 = MS-124W S/A,
1904 3 = MS-124W M/B, 4 = Generic
1906 This module supports multiple cards. This module does not support autoprobe
1907 thus the main port must be specified!!! Other options are optional.
1912 Module for Trident 4DWave DX/NX sound cards.
1913 * Best Union Miss Melody 4DWave PCI
1915 * Warpspeed ONSpeed 4DWave PCI
1918 * CHIC True Sound 4Dwave
1919 * Shark Predator4D-PCI
1920 * Jaton SonicWave 4D
1922 pcm_channels - max channels (voices) reserved for PCM
1923 wavetable_size - max wavetable size in kB (4-?kb)
1925 This module supports multiple cards and autoprobe.
1927 The power-management is supported.
1929 Module snd-usb-audio
1930 --------------------
1932 Module for USB audio and USB MIDI devices.
1934 vid - Vendor ID for the device (optional)
1935 pid - Product ID for the device (optional)
1936 device_setup - Device specific magic number (optional)
1937 - Influence depends on the device
1940 This module supports multiple devices, autoprobe and hotplugging.
1942 Module snd-usb-caiaq
1943 --------------------
1945 Module for caiaq UB audio interfaces,
1946 * Native Instruments RigKontrol2
1947 * Native Instruments Kore Controller
1948 * Native Instruments Audio Kontrol 1
1949 * Native Instruments Audio 8 DJ
1951 This module supports multiple devices, autoprobe and hotplugging.
1953 Module snd-usb-usx2y
1954 --------------------
1956 Module for Tascam USB US-122, US-224 and US-428 devices.
1958 This module supports multiple devices, autoprobe and hotplugging.
1960 Note: you need to load the firmware via usx2yloader utility included
1961 in alsa-tools and alsa-firmware packages.
1966 Module for AC'97 motherboards based on VIA 82C686A/686B, 8233,
1967 8233A, 8233C, 8235, 8237 (south) bridge.
1969 mpu_port - 0x300,0x310,0x320,0x330, otherwise obtain BIOS setup
1971 joystick - Enable joystick (default off) [VIA686A/686B only]
1972 ac97_clock - AC'97 codec clock base (default 48000Hz)
1973 dxs_support - support DXS channels,
1974 0 = auto (default), 1 = enable, 2 = disable,
1975 3 = 48k only, 4 = no VRA, 5 = enable any sample
1976 rate and different sample rates on different
1978 [VIA8233/C, 8235, 8237 only]
1979 ac97_quirk - AC'97 workaround for strange hardware
1980 See "AC97 Quirk Option" section below.
1982 This module supports one chip and autoprobe.
1984 Note: on some SMP motherboards like MSI 694D the interrupts might
1985 not be generated properly. In such a case, please try to
1986 set the SMP (or MPS) version on BIOS to 1.1 instead of
1987 default value 1.4. Then the interrupt number will be
1988 assigned under 15. You might also upgrade your BIOS.
1990 Note: VIA8233/5/7 (not VIA8233A) can support DXS (direct sound)
1991 channels as the first PCM. On these channels, up to 4
1992 streams can be played at the same time, and the controller
1993 can perform sample rate conversion with separate rates for
1995 As default (dxs_support = 0), 48k fixed rate is chosen
1996 except for the known devices since the output is often
1997 noisy except for 48k on some mother boards due to the
1999 Please try once dxs_support=5 and if it works on other
2000 sample rates (e.g. 44.1kHz of mp3 playback), please let us
2001 know the PCI subsystem vendor/device id's (output of
2003 If dxs_support=5 does not work, try dxs_support=4; if it
2004 doesn't work too, try dxs_support=1. (dxs_support=1 is
2005 usually for old motherboards. The correct implemented
2006 board should work with 4 or 5.) If it still doesn't
2007 work and the default setting is ok, dxs_support=3 is the
2008 right choice. If the default setting doesn't work at all,
2009 try dxs_support=2 to disable the DXS channels.
2010 In any cases, please let us know the result and the
2011 subsystem vendor/device ids. See "Links and Addresses"
2014 Note: for the MPU401 on VIA823x, use snd-mpu401 driver
2015 additionally. The mpu_port option is for VIA686 chips only.
2017 The power-management is supported.
2019 Module snd-via82xx-modem
2020 ------------------------
2022 Module for VIA82xx AC97 modem
2024 ac97_clock - AC'97 codec clock base (default 48000Hz)
2026 This module supports one card and autoprobe.
2028 Note: The default index value of this module is -2, i.e. the first
2031 The power-management is supported.
2036 Module for virtual rawmidi devices.
2037 This module creates virtual rawmidi devices which communicate
2038 to the corresponding ALSA sequencer ports.
2040 midi_devs - MIDI devices # (1-4, default=4)
2042 This module supports multiple cards.
2047 Module for sound cards based on the Asus AV200 chip, i.e.,
2048 Xonar D2 and Xonar D2X.
2050 This module supports autoprobe and multiple cards.
2052 Power management is _not_ supported.
2057 Module for Digigram VX-Pocket VX222, V222 v2 and Mic cards.
2059 mic - Enable Microphone on V222 Mic (NYI)
2060 ibl - Capture IBL size. (default = 0, minimum size)
2062 This module supports multiple cards.
2064 When the driver is compiled as a module and the hotplug firmware
2065 is supported, the firmware data is loaded via hotplug automatically.
2066 Install the necessary firmware files in alsa-firmware package.
2067 When no hotplug fw loader is available, you need to load the
2068 firmware via vxloader utility in alsa-tools package. To invoke
2069 vxloader automatically, add the following to /etc/modprobe.conf
2071 install snd-vx222 /sbin/modprobe --first-time -i snd-vx222 && /usr/bin/vxloader
2073 (for 2.2/2.4 kernels, add "post-install /usr/bin/vxloader" to
2074 /etc/modules.conf, instead.)
2075 IBL size defines the interrupts period for PCM. The smaller size
2076 gives smaller latency but leads to more CPU consumption, too.
2077 The size is usually aligned to 126. As default (=0), the smallest
2078 size is chosen. The possible IBL values can be found in
2079 /proc/asound/cardX/vx-status proc file.
2081 The power-management is supported.
2086 Module for Digigram VX-Pocket VX2 and 440 PCMCIA cards.
2088 ibl - Capture IBL size. (default = 0, minimum size)
2090 This module supports multiple cards. The module is compiled only when
2091 PCMCIA is supported on kernel.
2093 With the older 2.6.x kernel, to activate the driver via the card
2094 manager, you'll need to set up /etc/pcmcia/vxpocket.conf. See the
2095 sound/pcmcia/vx/vxpocket.c. 2.6.13 or later kernel requires no
2096 longer require a config file.
2098 When the driver is compiled as a module and the hotplug firmware
2099 is supported, the firmware data is loaded via hotplug automatically.
2100 Install the necessary firmware files in alsa-firmware package.
2101 When no hotplug fw loader is available, you need to load the
2102 firmware via vxloader utility in alsa-tools package.
2104 About capture IBL, see the description of snd-vx222 module.
2106 Note: snd-vxp440 driver is merged to snd-vxpocket driver since
2109 The power-management is supported.
2114 Module for Yamaha PCI chips (YMF72x, YMF74x & YMF75x).
2116 mpu_port - 0x300,0x330,0x332,0x334, 0 (disable) by default,
2117 1 (auto-detect for YMF744/754 only)
2118 fm_port - 0x388,0x398,0x3a0,0x3a8, 0 (disable) by default
2119 1 (auto-detect for YMF744/754 only)
2120 joystick_port - 0x201,0x202,0x204,0x205, 0 (disable) by default,
2122 rear_switch - enable shared rear/line-in switch (bool)
2124 This module supports autoprobe and multiple chips.
2126 The power-management is supported.
2128 Module snd-pdaudiocf
2129 --------------------
2131 Module for Sound Core PDAudioCF sound card.
2133 The power-management is supported.
2139 The ac97_quirk option is used to enable/override the workaround for
2140 specific devices on drivers for on-board AC'97 controllers like
2141 snd-intel8x0. Some hardware have swapped output pins between Master
2142 and Headphone, or Surround (thanks to confusion of AC'97
2143 specifications from version to version :-)
2145 The driver provides the auto-detection of known problematic devices,
2146 but some might be unknown or wrongly detected. In such a case, pass
2147 the proper value with this option.
2149 The following strings are accepted:
2150 - default Don't override the default setting
2151 - none Disable the quirk
2152 - hp_only Bind Master and Headphone controls as a single control
2153 - swap_hp Swap headphone and master controls
2154 - swap_surround Swap master and surround controls
2155 - ad_sharing For AD1985, turn on OMS bit and use headphone
2156 - alc_jack For ALC65x, turn on the jack sense mode
2157 - inv_eapd Inverted EAPD implementation
2158 - mute_led Bind EAPD bit for turning on/off mute LED
2160 For backward compatibility, the corresponding integer value -1, 0,
2161 ... are accepted, too.
2163 For example, if "Master" volume control has no effect on your device
2164 but only "Headphone" does, pass ac97_quirk=hp_only module option.
2167 Configuring Non-ISAPNP Cards
2168 ============================
2170 When the kernel is configured with ISA-PnP support, the modules
2171 supporting the isapnp cards will have module options "isapnp".
2172 If this option is set, *only* the ISA-PnP devices will be probed.
2173 For probing the non ISA-PnP cards, you have to pass "isapnp=0" option
2174 together with the proper i/o and irq configuration.
2176 When the kernel is configured without ISA-PnP support, isapnp option
2177 will be not built in.
2180 Module Autoloading Support
2181 ==========================
2183 The ALSA drivers can be loaded automatically on demand by defining
2184 module aliases. The string 'snd-card-%1' is requested for ALSA native
2185 devices where %i is sound card number from zero to seven.
2187 To auto-load an ALSA driver for OSS services, define the string
2188 'sound-slot-%i' where %i means the slot number for OSS, which
2189 corresponds to the card index of ALSA. Usually, define this
2190 as the same card module.
2192 An example configuration for a single emu10k1 card is like below:
2193 ----- /etc/modprobe.conf
2194 alias snd-card-0 snd-emu10k1
2195 alias sound-slot-0 snd-emu10k1
2196 ----- /etc/modprobe.conf
2198 The available number of auto-loaded sound cards depends on the module
2199 option "cards_limit" of snd module. As default it's set to 1.
2200 To enable the auto-loading of multiple cards, specify the number of
2201 sound cards in that option.
2203 When multiple cards are available, it'd better to specify the index
2204 number for each card via module option, too, so that the order of
2205 cards is kept consistent.
2207 An example configuration for two sound cards is like below:
2209 ----- /etc/modprobe.conf
2211 options snd cards_limit=2
2212 alias snd-card-0 snd-interwave
2213 alias snd-card-1 snd-ens1371
2214 options snd-interwave index=0
2215 options snd-ens1371 index=1
2217 alias sound-slot-0 snd-interwave
2218 alias sound-slot-1 snd-ens1371
2219 ----- /etc/modprobe.conf
2221 In this example, the interwave card is always loaded as the first card
2222 (index 0) and ens1371 as the second (index 1).
2224 Alternative (and new) way to fixate the slot assignment is to use
2225 "slots" option of snd module. In the case above, specify like the
2228 options snd slots=snd-interwave,snd-ens1371
2230 Then, the first slot (#0) is reserved for snd-interwave driver, and
2231 the second (#1) for snd-ens1371. You can omit index option in each
2232 driver if slots option is used (although you can still have them at
2233 the same time as long as they don't conflict).
2235 The slots option is especially useful for avoiding the possible
2236 hot-plugging and the resultant slot conflict. For example, in the
2237 case above again, the first two slots are already reserved. If any
2238 other driver (e.g. snd-usb-audio) is loaded before snd-interwave or
2239 snd-ens1371, it will be assigned to the third or later slot.
2242 ALSA PCM devices to OSS devices mapping
2243 =======================================
2245 /dev/snd/pcmC0D0[c|p] -> /dev/audio0 (/dev/audio) -> minor 4
2246 /dev/snd/pcmC0D0[c|p] -> /dev/dsp0 (/dev/dsp) -> minor 3
2247 /dev/snd/pcmC0D1[c|p] -> /dev/adsp0 (/dev/adsp) -> minor 12
2248 /dev/snd/pcmC1D0[c|p] -> /dev/audio1 -> minor 4+16 = 20
2249 /dev/snd/pcmC1D0[c|p] -> /dev/dsp1 -> minor 3+16 = 19
2250 /dev/snd/pcmC1D1[c|p] -> /dev/adsp1 -> minor 12+16 = 28
2251 /dev/snd/pcmC2D0[c|p] -> /dev/audio2 -> minor 4+32 = 36
2252 /dev/snd/pcmC2D0[c|p] -> /dev/dsp2 -> minor 3+32 = 39
2253 /dev/snd/pcmC2D1[c|p] -> /dev/adsp2 -> minor 12+32 = 44
2255 The first number from /dev/snd/pcmC{X}D{Y}[c|p] expression means
2256 sound card number and second means device number. The ALSA devices
2257 have either 'c' or 'p' suffix indicating the direction, capture and
2258 playback, respectively.
2260 Please note that the device mapping above may be varied via the module
2261 options of snd-pcm-oss module.
2264 Proc interfaces (/proc/asound)
2265 ==============================
2267 /proc/asound/card#/pcm#[cp]/oss
2268 -------------------------------
2269 String "erase" - erase all additional informations about OSS applications
2270 String "<app_name> <fragments> <fragment_size> [<options>]"
2272 <app_name> - name of application with (higher priority) or without path
2273 <fragments> - number of fragments or zero if auto
2274 <fragment_size> - size of fragment in bytes or zero if auto
2275 <options> - optional parameters
2276 - disable the application tries to open a pcm device for
2277 this channel but does not want to use it.
2278 (Cause a bug or mmap needs)
2279 It's good for Quake etc...
2280 - direct don't use plugins
2281 - block force block mode (rvplayer)
2282 - non-block force non-block mode
2283 - whole-frag write only whole fragments (optimization affecting
2285 - no-silence do not fill silence ahead to avoid clicks
2286 - buggy-ptr Returns the whitespace blocks in GETOPTR ioctl
2287 instead of filled blocks
2289 Example: echo "x11amp 128 16384" > /proc/asound/card0/pcm0p/oss
2290 echo "squake 0 0 disable" > /proc/asound/card0/pcm0c/oss
2291 echo "rvplayer 0 0 block" > /proc/asound/card0/pcm0p/oss
2294 Early Buffer Allocation
2295 =======================
2297 Some drivers (e.g. hdsp) require the large contiguous buffers, and
2298 sometimes it's too late to find such spaces when the driver module is
2299 actually loaded due to memory fragmentation. You can pre-allocate the
2300 PCM buffers by loading snd-page-alloc module and write commands to its
2301 proc file in prior, for example, in the early boot stage like
2302 /etc/init.d/*.local scripts.
2304 Reading the proc file /proc/drivers/snd-page-alloc shows the current
2305 usage of page allocation. In writing, you can send the following
2306 commands to the snd-page-alloc driver:
2308 - add VENDOR DEVICE MASK SIZE BUFFERS
2310 VENDOR and DEVICE are PCI vendor and device IDs. They take
2311 integer numbers (0x prefix is needed for the hex).
2312 MASK is the PCI DMA mask. Pass 0 if not restricted.
2313 SIZE is the size of each buffer to allocate. You can pass
2314 k and m suffix for KB and MB. The max number is 16MB.
2315 BUFFERS is the number of buffers to allocate. It must be greater
2316 than 0. The max number is 4.
2320 This will erase the all pre-allocated buffers which are not in
2327 ALSA project homepage
2328 http://www.alsa-project.org
2330 ALSA Bug Tracking System
2331 https://bugtrack.alsa-project.org/bugs/
2334 mailto:alsa-devel@alsa-project.org
projects / linux-2.6-omap-h63xx.git / blob